Abdi Dacar
Dandenong,Australia
Summary
Dynamic EMC Engineer with extensive experience at Compliance Engineering, excelling in compliance testing and regulatory standards. Proven ability in developing test procedures and technical documentation, while fostering strong team collaboration. Skilled in soldering and effective communication, consistently delivering high-quality results in fast-paced environments. Committed to achieving compliance and enhancing product performance.
Overview
11
11
years of professional experience
1
1
Certification
Work History
EMC Engineer
Compliance Engineering
Keysborough, Australia
03.2022 - 11.2024
- Perform electrical/electronic EMC pre/compliance product certification tests including ISM, Multimedia, Lighting, Rolling Stock and Rail On-board components, automotive and defense equipment to comply world-wide regulatory body standards: IEC 61000 series, IEC61000-3 series, IEC61000-6 series FCC part15/18, CISPR 11, CISPR 12, CISPR 25, UN Reg 10, MIL-STD-461, ISO 7637-x series, ISO 11452-x series, CISPR 14, CISPR 32, CISPR 15, IEC 60601 series, EN 61326 series, 60335-1, ASNZ 4268, EN 300 328 series, ETSI EN31489-1/17, EN 50155, EN 50121 series, IEC 60255 and IEC 61373 and other generic and product standards
- Prepare formal compliance test reports.
- Build and update test procedures.
- Calibrating laboratory equipment
EMC COMPLIANCE TEST ENGINEER
EMC Bayswater
Croydon, Australia
01.2021 - 03.2022
- Company Overview: Sub-branch of EMC, /www.emcbayswater.com.au
- Performed EMI/EMC/EMR/SAR testing either on site or in the laboratory.
- Performed lab Equipment calibration & Maintenance and Complete Vehicle
- Built test procedures with reference to standards.
- Prepared, quotations, formal compliance test reports for approval of RCM, CE, FCC, ISED
- Performed RF radiation hazard measurement including EMR surveys, RADHAZ testing, EME, ELF and EMF
- Sub-branch of EMC, /www.emcbayswater.com.au
Electrical and Electronic Test Engineer and Technician
CTDI
Melrose, Tullamarine, Australia
02.2020 - 01.2021
- Fault finding, testing by using smart-software, repairing and software upgrading of Google phones, I-phones, Tablets, Laptops, Zebra 3D scanners, Zebra mobile computers series (MC90, MC67, MC3X, TC7X, MK590, WT40)
- Carry out service and installation tasks including building wiring harness and the installation of components, plugs, and terminal strip
- Testing of wiring and electronic circuit boards and commissioning in line with design specifications
- Wide range of cable assembling and harness, while ensuring the quality standards are met
- Reading and interpreting drawings by using IPC (Institute of printed circuits) standards
- Cable wire crimping stripping and soldering
- Provide regular feedback to Leading Hand regarding maintenance required for tooling and production facilities
- Ability to work with minimum supervision, and complete assignments in the required time frame
- Ability to read schematics to complete assigned task
- Ensured all HSE procedures are followed, and all incidents are reported accordingly
- Ensured participation in 5S programs as required on daily basis.
Electrical and Electronic Test Engineer and Technician
VeriFone
Melrose, Tullamarine, Australia
06.2018 - 02.2020
- Worked on Fault finding, diagnosing and repairing EFTPOS terminals, bases
- Soldered and de-soldered electronic PCB board components by using soldering kit and electrical hand-tools, automatic screw drivers
- Multi-meter, Oscilloscope, Power supplies, Signal Generator, and Spectrum analyzer
- Formatted crashed firmware and upgraded Terminal software
- Tested hardware functionality of terminals and Bases such as Base-terminal pairing, Bluetooth, GPRS, Smartcard detection, contactless card detection by executing software designed for them
- Prepared technical reports of the testing and repair
EMC Test Officer, trainee
EMC Lab UTHM
Malaysia
03.2014 - 06.2015
- Company Overview: Emc.uthm.edu.my/v5/
- Tested and troubleshot electrical/electronic products to comply with EMC standards by utilizing magnetic and electric probes, spectrum analyser and network analyser to detect source of non-intentional emissions.
- Proposed useful mitigation techniques to pass EMC test compliance.
- Experienced working in a semi-anechoic chamber to perform radiated emissions and radiated immunity tests.
- Also conducted pulse interference tests
- Conducted ESD, Surge and Electrical Fast transient Test, EFT tests by following international standards.
- Managed different tests by following international EMC standards such as CISPR13, CISPR20, CISPR22, CISPR24 and generic standards such as IEC-61000-4-3
- Prepared detailed technical reports of the tests, highlighted challenges and mitigation techniques used to overcome unintended disturbances
- Emc.uthm.edu.my/v5/
Education
Master's Degree - Electrical Engineering
University Tun Hussein Onn Malaysia (UTHM)
Johor01.2016
BS - Telecom Engineering
Gollis University
01.2014
Skills
- Compliance testing
- Electronic Repair and Testing
- Soldering
- Multi-meter operation
- Oscilloscope operation
- Signal Generator operation
- Spectrum analyzer operation
- Networking
- Helpdesk
- Network Technician
- IP/MPLS
- LAN
- WAN
- WiFi (80211)
- Command Line
- Microsoft Word
- Microsoft Excel
- Microsoft Access
- CAD Software
- AutoCAD
- Java
- C
- CMATLAB
- Altium Designer
- Verbal communication
- Written communication
- Teamwork
- Workload management
- Building partnerships
- Fostering relationships
- EMC testing
- Regulatory compliance
- Technical documentation
- Friendly, positive attitude
- Teamwork and collaboration
- Compliance reporting
- Test procedure development
- Problem solving
- Effective communication
- Project management
- Time management
- Flexible and adaptable
- Excellent communication
Certification
Cisco Certified Network Associate (200-301 Path)
Safety Cards
10/01/24, RIW NO: 20-00295084 / Medical Checkup for Rail
References
References available upon request.
Timeline
EMC Engineer
Compliance Engineering
03.2022 - 11.2024
EMC COMPLIANCE TEST ENGINEER
EMC Bayswater
01.2021 - 03.2022
Electrical and Electronic Test Engineer and Technician
CTDI
02.2020 - 01.2021
Electrical and Electronic Test Engineer and Technician
VeriFone
06.2018 - 02.2020
EMC Test Officer, trainee
EMC Lab UTHM
03.2014 - 06.2015
Master's Degree - Electrical Engineering
University Tun Hussein Onn Malaysia (UTHM)
BS - Telecom Engineering
Gollis University
Similar Profiles
JENNIFER FOWLERJENNIFER FOWLER
Mid-Market and Enterprise Account Executive - West Coast at COMPLIANCE HRMid-Market and Enterprise Account Executive - West Coast at COMPLIANCE HR
Stephanie GastonStephanie Gaston
Administrative Assistant at US Compliance ServicesAdministrative Assistant at US Compliance Services
Melissa MapleMelissa Maple
NA at Compliance/HR, MOORE Trucking, LLCNA at Compliance/HR, MOORE Trucking, LLC
Kavi JayawardenaKavi Jayawardena
Qualified Senior Hairdresser at Smooth N SilkyQualified Senior Hairdresser at Smooth N Silky
Navpreet KaurNavpreet Kaur
Kindergarten Teacher at Berwick Twinkle Star Early Learning CentreKindergarten Teacher at Berwick Twinkle Star Early Learning Centre