Amin Mellati

• Checked production goods and reported deficiencies, was responsible for quality of the products manufactured in the factory and make sure team deliver their jobs to t high standard and investigate re-work actions.
• Worked directly with QA personnel to identify and correct defects.
• Recording shift data or any problems occurred
• I used my experience on leadership to get best out of my team in terms of efficiency by promoting supportive and friendly environment.
• Trained 20 assemblers and provided adequate knowledge about Safety, Quality, Tools, 5S, Assembly, use of machinery, standard operating procedures and company policies.
• Assigned and oversaw daily production schedules to 5 to 7employees.
• Filed all documentation correctly and efficiently and train my team to do so.
• Assembled products and components and made proactive adjustments to settings to produce work within tight tolerances.
• Distributed individual assignments to team members and monitored progress against production timetables and adapted plans and adjusted equipment to maintain high standards of functionality and safety.
• Mainly responsible for making electrical equipment like PDU, Fan tray, IPAMM and …
• Demonstrated understanding of occupation-specific electrical safety standards and procedures.
• Inspected systems, diagnosed problems and developed optimal solutions.
• Assembled electrical systems or prototypes using hand tools or measuring instruments.
• Applied diagnostics and testing tools to systems, quickly identifying issues and implementing completing resolutions.
• Evaluated finished assemblies for compliance with standard procedures and design requirements.

Compressed Natural Gas (CNG) stations has a wide range of contribution all over Iran to supply energy, about 172 stations were located in my work area

• Duties included in this role:
• Troubleshot and diagnosed Technical equipment issues, quickly made plans for repairs and monitored use to rectify issues.
• Specified system components and directed product modifications to comply with engineering design and performance specifications.
• Applied mechanical problem solving skills to develop creative solutions for quality products.
• Preparing scheduled plans
• Security of the stations
• Analyzing the data and finding any technical faults throughout the contribution of gas
• Evaluate, design, and estimate natural gas distribution facilities, consist of main lines, service lines, and measurement & regulation equipment.
• Prepare permit applications and easement requests
• Prepare detailed drawings including 3D and 2D
• Report on project variances
• Support Operations employees in emergency situations
• Provide training and guidance to new personnel
• Conduct winter preparedness review
• Assist in contract bid documentation

• Some stations, like City Gate Stations (CGS) which decrease pressure from 1000 to 250 psi in the entrance of the cities, were controlled by monitoring in the dispatching room by SCADA
• I was responsible for:
• Controlling main factors (pressure, temperature and gas consumption in different pipelines) of those stations to control if they were working properly
• Report any drop in entrance pressure of the cities
• Supervising Calibrating of pressure and temperature transmitters of the stations
• Providing reports for CEO of the company
• Inspecting RTU stations
• 3D Designs
• Coordinated flow of natural gas throughout distribution system of public utility or pipeline to ensure volume and pressure of gas required for consumers demands
• Monitored telemeter panel-board to determine gas pressure and volume, and records instrument readings in log.
• Revised correlating data, such as gas quality, pressure and temperature with variables affecting consumer demand, such as weather conditions and time of day to forecast load adjustments.
• Adjusted controls to regulate gas flow and pressure through system or telephones GAS-COMPRESSOR OPERATOR to increase or decrease pressure in pipelines according to forecast. Directs GAS-PUMPING-STATION OPERATOR to pump gas from holding station into distribution system and return according to supply and demand.
• Informed station personnel to regulate flow of gas from wells into system to maintain specified pressure and volume in pipelines. Records data, such as gas pressure and volume from outlying stations.
• Observes cyclometer to detect deviations in mixture of natural gas with manufactured gas according to specified BTU rating.
• Notifies mixing station personnel when deviations occur. May discontinue gas service to specified areas when emergencies or gas shortages exist.

• Managing staff to Diagnosed, repaired and calibrated gas correctors, pressure gauges and temperature gauges within the scheduled time
• supervising Maintenance of turbine gas meters
• Inspecting gas stations in regard to working properly and if standards were complied with.
• Scheduled plan to deliver instruments at the proper time by subcontractors.
• Maintenance of calibration instruments (such as deadweight tester) and any repairs if they were needed.
• Designing new devices to calibrate gauges and gas turbine meters.
• Applied safety and electrical code regulations on every job.
• Responded to technical concerns quickly and effectively devised solutions.
• Followed up with external contractors, project owners and other stakeholders to gather information and resolve issues.
• Succeeded to invent a pneumatic deadweight tester for calibrating 5 pressure gauges at the same time controlled by a Pneumatic valve and HDMI
• Succeeded to build Gas Turbine meter calibration system for calibration Lab and develop the old system.

In the first year of my work in NIGC I was maintenance supervisor of main gas pipelines, TBS and CGS stations

• supervised maintenance of steel pipes and polyethylene pipes
• Planning the maintenance schedule and reporting it to announce the people any disconnection in gas supplement of the houses
• Supervising welders and labors in accordance with fabrication and fitting standard
• Preparing of maps and reporting any changes in pipelines to the drafting department to be affected on as built maps
• Liaising with clients and other supervisors
• Led weekly operations contractor meetings, facilitating stronger communication and helping to resolve critical issues.
• Performed regular job site observations to provide direction for general contractor personnel and subcontractor laborers.
• Conducted critical pre-installation conferences with general contractors, subcontractors, consultants and manufacturer's representatives.
• Monitored, coached and supervised team of 30-40 employees.
• Worked flexible hours; night, weekend, and holiday shifts.
• Oversaw daily operations at site, keeping team production moving at optimal pace.

• Manufactured molds with a CNC machine
• Designed and drafted molds that were ordered by clients with Solidworks or Catia software and covert it to G codes by SurfCam
• Completed unfinished design of clients
• Supervised the technicians and procedure of production on a CNC machine, Spark and ...
• Supported engineering design development through analysis and simulation of prototypes and 3D computer models.
• Provided technical engineering support and project management for design, engineering and development of new products.
• Conducted research to test and analyze feasibility, design, operation and performance of equipment, components and systems.
• Designed parts using injection molding techniques and assisted with design of molds.