ANDRES PAZOS
Sydney,NSW
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Hardworking employee with customer service, multitasking, and time management abilities. Devoted to giving every customer a positive and memorable experience. Dependable professional with strong background installing, maintaining, and repairing systems and components. Maintains equipment safety and performance with in-depth inspections and corrections. Dedicated to quality and always professional. Talented electrical engineer knowledgeable about inventory, schedules and new installations. Familiar with quality standards and documentation requirements. Experienced with various power and hand tools and reading tape measures accurately.
Overview
11
11
years of professional experience
Work History
Installer
MW INTERIORS
10.2023 - Current
- Mounted and connected mechanical and electrical equipment according to specifications.
- Wired equipment while following safe electrical procedures to eliminate risk.
- Consulted blueprints and manufacturer manuals to plan appropriate and effective repair work.
- Reviewed blueprints and manufacturer manuals before beginning installation and repair work.
- Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
Electrical Engineer
Investments And Tenders
02.2020 - 09.2023
- Created electrical system drawings, wiring diagrams, and schematics.
- Provided technical support for the installation and maintenance of various systems.
- Performed troubleshooting of complex electrical systems to identify root cause of issues.
- Developed and implemented electrical engineering strategies, plans and designs.
- Provided troubleshooting and analysis for discovered electrical faults, offering potential solutions.
- Ensured compliance with safety regulations when installing or repairing any type of electrical system component.
- Determined power requirements for specific applications based on load calculations and other factors.
- Monitored project progress against established timelines in order to ensure timely completion.
- Analyzed test results to diagnose malfunctions in electrical systems.
- Collaborated with other engineers on design projects to ensure safety and quality standards were met.
- Determined appropriate cables, fuses and electrical elements to use during installation phase of weapons detection systems.
- Contacted vendors to procure equipment and tools to meet organizational demands.
- Utilized CAD drawings to provide design documentation.
- Tracked company inventories, reported equipment damages and ordered new items to prevent shortages.
- Calculated costs of equipment purchases and operations and assisted with department budget planning.
- Discussed engineering projects and products with both clients and other engineers.
Electrical Engineering Technician
INGELEC
10.2016 - 02.2020
- Interpreted electrical and mechanical schematics, blueprints and diagrams.
- Evaluated blueprints and schematic diagrams prior to beginning any installation project.
- Assisted engineers in designing, constructing, testing and troubleshooting electrical circuits.
- Created detailed drawings of electrical equipment using AutoCAD software.
- Provided technical support to customers regarding installation of electrical products or services.
- Provided troubleshooting and analysis for discovered electrical faults, offering potential solutions.
- Contacted vendors to procure equipment and tools to meet organizational demands.
- Oversaw production efforts to guarantee timely and budget-conscious completion.
- Utilized CAD drawings to provide design documentation.
Budget Coordinator
PMI
06.2016 - 09.2016
- Reviewed and approved purchase requisitions for accuracy and compliance with budgetary guidelines.
- Monitored project budgets and tracked progress against established goals.
- Identified discrepancies between proposed budgets and actual expenditures.
- Analyzed departmental spending trends to identify areas for cost savings.
- Determined and tracked budget expenses with accuracy and transparency.
Electrical Engineer
UTEM
11.2015 - 05.2016
- Created electrical system drawings, wiring diagrams, and schematics.
- Performed troubleshooting of complex electrical systems to identify root cause of issues.
- Collaborated with other engineers on design projects to ensure safety and quality standards were met.
- Utilized CAD drawings to provide design documentation.
- Managed resources, created project schedules and maintained department budgets.
Electrical Site Engineer
INGELEC
08.2014 - 10.2015
- Inspected electrical systems, equipment and fixtures to identify safety hazards for replacement or repair.
- Participated in meetings with clients or contractors to discuss project objectives, status updates.
- Installed, tested and maintained electrical wiring systems and related components.
- Evaluated the performance of electrical systems and identified areas for improvement.
- Read and followed orders, blueprints, schematics, and drawings in orderly to accurately assign work.
- Performed site surveys to identify existing power systems and equipment.
- Coordinated work schedules, project plans, payments and other core details with subcontractors.
- Collaborated with contractors regarding scheduling of work activities, material deliveries.
- Reviewed and monitored cost and man-hour budget for installation process to develop staff facilities, equipment, and tool requirement plan.
- Reviewed quality of work being performed and checked compliance with design standards.
- Provided technical advice on design improvements, cost savings, and energy efficiency measures.
- Enforced safety regulations and penalized workers for not following work safety agreements.
- Prepared estimates for materials needed based on customer specifications.
- Developed detailed drawings using AutoCAD software for new installation projects.
- Interpreted blueprints to assess the scope of work required for each job assignment.
- Supervised a team of electricians during the commissioning process of new installations.
- Performed electrical design analyses and tests for proposed systems and devices.
- Utilized CAD drawings to provide design documentation.
- Designed, controlled and installed electrical systems and products.
- Calculated costs of equipment purchases and operations and assisted with department budget planning.
- Discussed engineering projects and products with both clients and other engineers.
Drafting Engineer
UT-ITAFAER
09.2013 - 08.2014
- Utilized GPS techniques to assemble data from field surveys and measure distances and elevations.
- Facilitated construction by mapping out installations and establishing reference points, grades and elevations.
- Collaborated with other engineers to develop new product designs or modify existing ones.
- Utilized CAD software programs such as AutoCAD, SolidWorks, Creo, Pro-E, and Inventor to create drawings.
- Worked closely with customers throughout the design process ensuring satisfaction with end product results.
- Updated blueprints with new revisions or changes made during the course of a project's development cycle.
- Generated reports detailing design changes or modifications for project documentation purposes.
- Prepared bill of materials documents for various products.
- Reviewed existing designs for accuracy and efficiency and recommend changes as needed.
- Produced 2D and 3D design drafts using hand drawings and AutoCAD software.
- Developed technical drawings and schematics to support engineering design projects.
- Tested prototypes according to design specifications prior to full scale production.
- Maintained a comprehensive library of current CAD files used in drafting projects.
- Created designs using computer programs such as AutoCAD and [Software] to complete shop drawings.
- Implemented revisions as required by engineering, customer or suppliers.
- Developed precise drawings from scratch based on written and verbal specifications supplied by customer, engineering or sales.
- Assisted drafters in developing structural and mechanical design of products using computer-assisted design (CAD) software.
- Received and reviewed details from design professionals to determine precise measurements for drawing preparation.
- Coordinated with project engineer on final as-built drawings so department and customer had accurate record of final design implemented on site.
- Formulated bills of materials outlining components required for manufacture or purchase with clear reference to visual image on drawing.
- Estimated quantities and cost of materials, equipment or labor to determine project feasibility.
- Inspected project sites to monitor progress and conform to design specifications and safety or sanitation standards.
- Analyzed survey reports, maps or other topographical or geologic data.
- Directed or participated in surveying to lay out installations or establish reference points, grades or elevations to guide construction.
Education
ELECTRICAL ENGINEER - ELECTRICITY
UNIVERSIDAD TECNOLOGICA DE PEREIRA
COLOMBIA07.2013
High School Diploma -
INSTITUTO CHAMPAGNAT
COLOMBIA06.2006
Skills
- Construction knowledge
- Pre-installation Site Prep
- Estimating abilities
- Inventory Accountability
- Worksite preparation
- Following safety practices
- Worksite Safety and Maintenance
- Permit coordination
- Professional Appearance
- Work Orders
- Service Documentation
- Detail orientation
- Inventory Oversight
- Troubleshooting
- Project Management
- Electrical Wiring
- Blueprint Reading
- Power Tool Operation
- Electrical Systems
- Installation expertise
- Positive Attitude
- Contract Management
Additional Information
SOFTWARE TOOLS
- AUTOCAD
- MICROSOFT EXCEL
- MICROSOFT OFFICE
- DLTCAD
- PLSCAD
- TOWER
- DIALUX
Languages
Spanish
Native or Bilingual
English
Limited Working
Timeline
Installer
MW INTERIORS
10.2023 - Current
Electrical Engineer
Investments And Tenders
02.2020 - 09.2023
Electrical Engineering Technician
INGELEC
10.2016 - 02.2020
Budget Coordinator
PMI
06.2016 - 09.2016
Electrical Engineer
UTEM
11.2015 - 05.2016
Electrical Site Engineer
INGELEC
08.2014 - 10.2015
Drafting Engineer
UT-ITAFAER
09.2013 - 08.2014
ELECTRICAL ENGINEER - ELECTRICITY
UNIVERSIDAD TECNOLOGICA DE PEREIRA
High School Diploma -
INSTITUTO CHAMPAGNAT
Similar Profiles
Raiden JangRaiden Jang
Joinery Installer at MW InteriorsJoinery Installer at MW Interiors
Bahruz MammadliBahruz Mammadli
Web designer at MW designWeb designer at MW design
EVAN DEPARDAYEVAN DEPARDAY
Stagiaire at MW Multi serviceStagiaire at MW Multi service
Raj PatilRaj Patil
Relationship Manager at Kotak Mahindra Bank LtdRelationship Manager at Kotak Mahindra Bank Ltd
WULINA PANKAJ KODEWULINA PANKAJ KODE
Customer Service Officer at ECOLAB LTDCustomer Service Officer at ECOLAB LTD