Andrew Hull
Dayboro,QLD
Summary
Motivated student pursuing associate degree in electrical engineering and pursuing real-world experience as Electrical Engineer Intern with leading-edge company. Diligent, reliable and well-versed in engineering principles and project support.
Overview
11
11
years of professional experience
1
1
Certification
Work History
Electrician
Level Up Electrical & Airconditioning
11.2023 - Current
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Stored and maintained power tools and equipment for each job.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
- Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
- Developed strong working relationships with clients through consistent professionalism, reliability, and transparency during projects.
- Provided preliminary sketches and cost estimates for materials and services.
- Troubleshot and repaired malfunctioning systems and components.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Managed over 60 jobs at any given time including; customer relations, site specifics, communicating with other trades and organizing parts and materials.
Structural Restorer
Restoration Makesafe Australia
02.2022 - 11.2022
- Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.
- Carried out day-day-day duties accurately and efficiently.
- Demonstrated respect, friendliness and willingness to help wherever needed.
- Worked flexible hours; night, weekend, and holiday shifts.
- Performed duties in accordance with applicable standards, policies and regulatory guidelines to promote safe working environment.
- Understood and demonstrated use of basic electricity principles and electronics.
- Troubleshot hardware issues with programmable logic controllers and touchscreens.
- Provided approximate power usage statements for drying equipment used on restoration jobs.
Director
Self-employed
01.2021 - 12.2021
- Managed budgets effectively to ensure optimal use of resources while maintaining financial stability.
- Strengthened internal controls by reviewing existing policies and procedures, ensuring compliance with regulatory requirements.
- Monitored office workflow and administrative processes to keep operations running smoothly.
- Evaluated company documentation to verify alignment with regulatory requirements.
- Increased company revenue by streamlining processes and implementing cost-saving measures.
- Managed purchasing, sales, marketing and customer account operations efficiently.
- Improved overall system performance with meticulous ductwork cleaning services that increased airflow efficiency in residential properties.
- Boosted customer satisfaction by providing timely and professional air conditioning maintenance services.
- Maintained a safe working environment by adhering to safety protocols while performing tasks such as electrical wiring, refrigerant handling, and equipment installation.
- Troubleshot complex mechanical issues using diagnostic tools, resulting in faster resolution times for customers experiencing system failures.
- Established a reputation for excellent problem-solving abilities contributing to high customer referral rates.
- Reduced energy consumption for clients by recommending and installing energy-efficient air conditioning units.
- Provided reliable after-sales support to ensure long-term customer satisfaction with installed products and services.
- Developed strong relationships with suppliers resulting in expedited delivery times on essential parts.
- Conducted energy audits for clients to identify inefficiencies within their HVAC systems leading to tailored solutions that improved functionality.
Animal Husbandry Technician
CEFN
07.2019 - 12.2019
- Collected and analyzed samples for diagnostic testing to detect any potential health issues in animals.
- Educated visitors about the importance of responsible animal care, promoting a greater understanding and appreciation for the role of animal husbandry technicians.
- Optimized livestock productivity through selective breeding practices based on desired traits such as size or milk production capacity.
- Assisted with the delivery of newborn animals, ensuring their safety and wellbeing.
- Regularly inspected animal feeding equipment for proper functioning, preventing malnutrition or overfeeding issues among livestock populations.
- Improved animal health by administering vaccinations and medications as prescribed by veterinarians.
- Increased awareness among farm staff about biosecurity measures to prevent the spread of diseases among livestock herds.
- Enhanced breeding success by monitoring and recording animal behavior during mating season.
- Maintained cleanliness and hygiene in animal housing areas, reducing the risk of disease and infections.
- Cleaned and disinfected exam areas, surgical equipment, and kennels to prevent diseases and control odors.
- Restrained animals safely during exams and procedures.
- Kept records of animal health, medical treatment and injections and growth progress.
- Fed, groomed and watered 2000 swine animals.
- Observed animals in heat to detect approach of estrus and exercised animals to induce or hasten estrus when necessary.
- Aided insemination processes by inserting artificial equipment and biological samples to produce desired young.
- Oversaw artificial insemination processes and catheter equipment uses to maintain efficiency and animal safety.
Electrical Trade Assistant
Various
02.2019 - 06.2019
- Installed solar systems on domestic residence
- Worked on new homes through all stages of build
- Read and interpreted drawings to provide wiring layouts for new installations
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
- Serviced and cleaned solar panels
- Replaced and diagnosed faulty solar inverters
Apprentice Electrician
Tradesmen On Time
02.2016 - 01.2019
- Organized materials and tools in to maintain clean and neat work areas.
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Read and interpreted drawings to provide wiring layouts for new installations
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Checked and performed electrical wiring through conduits and holes in walls and floors.
- Provided layouts for new electrical system and component installations by reading and interpreting drawings accurately.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Studied building schematics to determine location of wiring and equipment.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Managed business report generation, recordkeeping and supply ordering.
- Adhered closely to AS:3000 and company regulations and industry best practices.
Aircon Technician
EAS QLD
02.2015 - 01.2016
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Connected heating or air conditioning equipment to water and refrigerant sources to form complete circuits.
- Increased longevity of HVAC systems by performing preventive maintenance.
- Installed and designed evaporative air cooler systems on both industrial/commercial and domestic areas.
Apprentice Electrician
Phoenix Contracting
03.2013 - 12.2013
- Worked under supervision of Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Helped complete system installations, digging trenches and breaking up concrete.
- Installed solar systems on commercial and domestic premise.
Education
No Degree - Electrician
TAFE Queensland
Bracken Ridge Tafe03.2024
No Degree - Diploma of Music
TAFE Queensland - Southbank
Brisbane, QLD11.2014
High School Diploma -
St James College
Spring Hill, QLD11.2012
Skills
- Structural knowledge
- Electrical troubleshooting
- Hand and power tools
- Commercial and residential wiring
- Troubleshooting skills
- Wiring installation
- Electrical Repairs
- Electrical Installation
- Electrical Troubleshooting
- Electrical experience
- Works well in team environment
- Wiring diagrams
Certification
- Restricted HVAC License - 8 years
- Electrical licence
- CPR
- LVR
- Working at heights
- White card
- Drivers license
Timeline
Electrician
Level Up Electrical & Airconditioning
11.2023 - Current
Structural Restorer
Restoration Makesafe Australia
02.2022 - 11.2022
Director
Self-employed
01.2021 - 12.2021
Animal Husbandry Technician
CEFN
07.2019 - 12.2019
Electrical Trade Assistant
Various
02.2019 - 06.2019
Apprentice Electrician
Tradesmen On Time
02.2016 - 01.2019
Aircon Technician
EAS QLD
02.2015 - 01.2016
Apprentice Electrician
Phoenix Contracting
03.2013 - 12.2013
No Degree - Electrician
TAFE Queensland
No Degree - Diploma of Music
TAFE Queensland - Southbank
High School Diploma -
St James College
- Restricted HVAC License - 8 years
- Electrical licence
- CPR
- LVR
- Working at heights
- White card
- Drivers license
Similar Profiles
Mitchell PlantenMitchell Planten
Electrician/Refrigeration and Air Conditioning Technician at Life Electrical And AirconditioningElectrician/Refrigeration and Air Conditioning Technician at Life Electrical And Airconditioning
Shane LobbShane Lobb
Apprentice Electrician at Level Electrical & AirApprentice Electrician at Level Electrical & Air
Brad TonksBrad Tonks
Team Leader at Level Electrical & AirTeam Leader at Level Electrical & Air