Angelo Laleo
The Vines,WA
Summary
Experienced boilermaker/welder with (MEM, and Mechanical Team on Fixed Plants) over 10 years of experience in the Australian mining industry. Excellent reputation for resolving problems, improving customer satisfaction, and driving overall operational improvements. Consistently saved costs while increasing profits.
Overview
16
16
years of professional experience
Work History
Boilermaker/Welder/Shutdown Laborer
Incredible Welding Solutions
Perth, WA
12.2022 - Current
- Welded components in flat, vertical, or overhead positions.
- Measured and marked cutting lines on material using a ruler or scribe.
- Assembled parts into complete units by welding them together.
- Inspected welds visually for defects such as cracks or porosity.
- Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
- Adjusted controls to generate specified electric power or steam output.
- Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
- Installed insulation on pipes, tanks, and other mechanical systems.
- Tested equipment for proper operation following repairs or maintenance activities.
- Maintained records of all repair work performed on boilers and related machinery.
- Followed safety procedures when working around high-pressure systems.
- Constructed steel structures according to blueprints provided by engineers.
- Used oxyacetylene torch to cut through steel plate for fabrication purposes.
- Replaced gaskets, valves, piping connections, and other components as needed.
- Conducted tests on welds to ensure strength requirements were met.
- Assisted in the construction of new boilers from scratch according to customer specifications.
- Followed safety procedures and protocols to minimize equipment mishaps.
- Identified issues and brought to attention of foreman.
- Analyzed specifications, diagrams and blueprints for each job.
- Studied blueprints to determine locations, relationships and dimensions of parts.
- Assembled and checked each boiler for defects.
- Cut, formed and welded steel to make and repair metal components.
- Read and understood drawings and used mathematical calculations for accurate results.
- Marked reference points for columns and plates on foundations using master straightedge.
Boilermaker /Coded Welder
OSOS ALLIANCE (SGS CONTROL SOLOMON POWER STATION PROJECT SOLOMON FMG SITE)
06.2022 - 11.2022
- Pipe instrumentation,flange management and installation.
- Cable tray and handrail fabrication.
- Welded structural frame and installation.
- Set up equipment and welded parts according to welding chart specifications and type.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment to fuse metal segments together.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
- Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
- Used welding skills to help repair and maintain heavy-duty machinery.
Boilermaker /Coded Welder
OSOS ALLIANCE (Thyssenkrupp STOCKER ANDERSON FMG SITE)
01.2022 - 06.2022
- Handrail modification and installation
- Modification of frame and instrumentation installation
- Set up equipment and welded parts according to welding chart specifications and type.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment to fuse metal segments together.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Maximized shop organization and equipment lifespan by maintaining equipment.
- Used welding skills to help repair and maintain heavy-duty machinery.
- Read and interpreted project blueprints and construction plans to inform accurate and complete installations.
- Read and followed blueprints and weld diagrams.
- Checked cut length frequently for deviation in cut length specs.
Boilermaker/ Coded Welder
OSOS Alliance PTY LTD
Perth, WA
08.2021 - 01.2022
- Mega Shutdown, 1 BHP Nelsonpoint Port Hedland by Ventia
- Utilized welding equipment and tools to safely complete predetermined operations
- Maintained compliance with all safety procedures from both client and employer
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Removed and replaced components of equipment to remedy malfunction
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Inspected and lubricated valves; removed, replaced or installed components to correct operating deficiencies
- Visited work sites to upgrade components, boiler tubes and ductwork
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Tightened or replaced bolts and gaskets to repair leaks
- Inspected equipment and structures to determine scope of work (SOW)
- Interpreted blueprints, sketches and specifications for each job
- Assembled and analyzed boilers for defects
- Dismantled equipment or devices to gain access and remove defective parts or components
- Developed and implemented service schedules for machinery and maintained 100% readiness rate
- Identified issues and addressed each immediately with job foreman
- Studied designs, blueprints and drawings to create templates of boilers
- Inspected equipment, structures and materials to identify cause of errors
- Used power hammers or weld pressure vessel tubes to achieve leakproof joints
- Repaired machinery and equipment according to manufacturer specifications
- Removed, replaced or installed materials to perform annual maintenance
- Cleaned and maintained boilers and associated equipment to increase efficiency and performance level
- Thanks and Regards
- Set up equipment and welded parts according to welding chart specifications and type.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment to fuse metal segments together.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Completed minor torch ups with MIG welders.
- Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
- Read blueprints and drawings and took measurements to plan layout and procedures.
- Adjusted weld machines to correct settings for precision and waste reduction.
- Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
- Cleaned and inspected parts and assemblies at each production stage and documented production defects.
- Prepared material surfaces for welding by removing scale, rust or other foreign matter.
- Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
Boilermaker /Coded Welder
CLOUGH
02.2021 - 05.2021
- Welding on various welding positions and procedures
- Thread pipe for installation of water and air pipe system
- Installation and steel modification on structural and piping
- Perform high torquing and tensioning on flanges
- Installation and welding pipe support, bracket and guides
- Use of electrical , battery operated and pneumatic tools and equipment
- Involvement in General installation components and General installation on Conveyor systems. Long travel drives,Ratable chutes,Apron Feeder Gear boxes Motors and Pulleys
- Developed team communications and information for meetings
- Coordinated movement of materials and equipment
- Identified issues and addressed each immediately with job supervisor
- Installation of transfer chute, belt feeder ,pulley hard skirts,modification and repair
- Installation of handrails kick plate, cross over modification and repairs
Shutdown Boilermaker Welder /MEM Boilermaker Welder
Linkforce Engineering
Perth, Western Australia
12.2018 - 01.2021
- Field maintenance for mine site we repair Cracks on trays (830E-4 930-5) digger pad, all bucket and power shovel
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Cleaned and maintained boilers and associated equipment to increase efficiency and performance level
- Repaired leaks by tightening or replacing bolts and gaskets, and utilizing
- Removed and replaced components of equipment to remedy malfunction
- Utilized welding equipment and tools to safely complete predetermined operations
- Coordinated movement of materials and equipment to job sites
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Identified issues and addressed each immediately with job foreman
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Dismantled equipment or devices to gain access and remove defective parts or components
- Coordinated with personnel to obtain permits and clearances for projects
- Assembled and analyzed boilers for defects
- Marked reference points for columns or plates on foundations using master straightedge
- Inspected equipment, structures and materials to identify cause of errors
- Maintained compliance with all safety procedures from both client and employer
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Maintained excellent attendance record, consistently arriving to work on time
- Resolved repair problems, improved operations and provided exceptional client support
- Utilized welding equipment and tools to safely complete predetermined operations
- Developed team communications and information for meetings
- Repaired machinery and equipment according to manufacturer specifications
- Coordinated movement of materials and equipment to job sites
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Identified issues and addressed each immediately with job foreman
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Dismantled equipment or devices to gain access and remove defective parts or components
- Coordinated with personnel to obtain permits and clearances for projects
- Interpreted blueprints, sketches and specifications for each job
- Assembled and analyzed boilers for defects
- Marked reference points for columns or plates on foundations using master straightedge
- Inspected equipment, structures and materials to identify cause of errors
- Maintained compliance with all safety procedures from both client and employer
- OHP and NPI South flank BHP project
- (mechanical Boilermaker Welder ), Field maintenance for mine site we repair Cracks on trays (830E-4 930-5) digger pad, all bucket and power shovel
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Cleaned and maintained boilers and associated equipment to increase efficiency and performance level
- Repaired leaks by tightening or replacing bolts and gaskets, and utilizing
- Removed and replaced components of equipment to remedy malfunction
- Utilized welding equipment and tools to safely complete predetermined operations
- Coordinated movement of materials and equipment to job sites
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Identified issues and addressed each immediately with job foreman
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Dismantled equipment or devices to gain access and remove defective parts or components
- Coordinated with personnel to obtain permits and clearances for projects
- Assembled and analyzed boilers for defects
- Marked reference points for columns or plates on foundations using master straightedge
- Inspected equipment, structures and materials to identify cause of errors
- Maintained compliance with all safety procedures from both client and employer
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Maintained excellent attendance record, consistently arriving to work on time
- Resolved repair problems, improved operations and provided exceptional client support
- Utilized welding equipment and tools to safely complete predetermined operations
- Developed team communications and information for meetings
- Repaired machinery and equipment according to manufacturer specifications
- Coordinated movement of materials and equipment to job sites
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Identified issues and addressed each immediately with job foreman
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Dismantled equipment or devices to gain access and remove defective parts or components
- Coordinated with personnel to obtain permits and clearances for projects
- Interpreted blueprints, sketches and specifications for each job
- Assembled and analyzed boilers for defects
- Marked reference points for columns or plates on foundations using master straightedge
- Inspected equipment, structures and materials to identify cause of errors
- Maintained compliance with all safety procedures from both client and employer
Boilermaker/Coded Welder
G&G Mining Fabrication
Perth, Australia
06.2018 - 09.2018
- Refurbishment and overhaul (general fabrication) of Mining Excavator, shovel, loader bucket and mining damp truck trays
- Inspected and lubricated valves; removed, replaced or installed components to correct operating deficiencies
- Removed, cleaned, inspected, and repaired or replaced components, including repair
- Used power hammers or weld pressure vessel tubes to achieve leak proof joints
- Cleaned and maintained boilers and associated equipment to increase efficiency and performance level
- Repaired leaks by tightening or replacing bolts and gaskets, and utilizing
- Built and repaired air pollution equipment, including blast furnaces, process tanks, storage tanks and water treatment tanks
- Removed, replaced or installed materials to perform annual maintenance
Boilermaker/Coded Welder
Gregory Fabrication
Clermont, QLD
02.2016 - 06.2018
- Field maintenance for mine site we repair Cracks on trays digger pad, bucket and power shovel
- Removed boiler casings, grades, handrails, manhole and hole covers to facilitate access to boilers or other vessels for repair
- Cleaned and maintained boilers and associated equipment to increase efficiency and performance level
- Repaired leaks by tightening or replacing bolts and gaskets, and utilizing
- Removed and replaced components of equipment to remedy malfunction
- Utilized welding equipment and tools to safely complete predetermined operations
- Coordinated movement of materials and equipment to job sites
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts
- Identified issues and addressed each immediately with job foreman
- Attached components, directing and guiding movement of materials, equipment, and assemblies into position
- Dismantled equipment or devices to gain access and remove defective parts or components
- Coordinated with personnel to obtain permits and clearances for projects
- Assembled and analyzed boilers for defects
- Marked reference points for columns or plates on foundations using master straightedge
- Inspected equipment, structures and materials to identify cause of errors
- Maintained compliance with all safety procedures from both client and employer
Fabrication Welder
OZCON INDUSTRIES PTY LTD
Dalby, QLD
01.2014 - 01.2016
- Fabricate Pipe to coupling for 1 metre to 12 metres
- Minimized warping by using good fitting, burning and welding techniques
- Used arc, gas-shielded arc, submerged arc and gas welding equipment to weld parts safely and efficiently
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines
- Effectively managed repair and maintenance scheduled to increase shop organization and equipment longevity
- Continuously monitored safety and quality of welding work while using on materials
- Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts
- Used metallurgy, and welding techniques to complete projects on time and under budget
- Removed excess slag with arc-cutting, grinding and other equipment
- Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions
- Welded various types of connections using to complete tasks on-time and with high-quality final results
- Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment
- Maintained correct length of arc and speed of movement to form specified depth of fusion and bead
- Chipped away debris and thick crusts of rust, slag and other materials to ready surfaces for welding
- Prepared welding equipment to perform advanced work
- Completed projects safely by closely monitoring conditions when lighting torches and using Bolted, clamped and tack-welded parts to secure components prior to welding
Fabrication/ Welder
Kotobuki Kogyo Company
, Japan
08.2008 - 08.2011
- Fabrication of shipbuilding industry
- Educational Information culture and sport
- Inspected welds and checked whether critical measurements met specifications upon completion
- Welded various types of connections using to complete tasks on-time and with high-quality final results
- Effectively managed repair and maintenance scheduled to increase shop organization and equipment longevity
Education
Saint Agnes High School
1999
Aluling Elementary School
1995
Skills
- Analysis of defects and repair services
- Parts and Components Fabrication
- Inspection Preparations
- Welding and Boiler Equipment
- Heavy Plate ,Air arc gouging and Lancing
- Power Tools and Hand Tools
- Communications and regulatory compliance
- Operational improvement
- Problem resolution
- Electric welder operations
- Material Prepping
- Cutting and Threading
- Repair Work
- Welding
- Shielded Metal Arc Welding
- Metal Cutting
- Safety Procedures
- Parts Fabrication
- Gas Metal Arc Welding
- Hand and Power Tools
Timeline
Boilermaker/Welder/Shutdown Laborer
Incredible Welding Solutions
12.2022 - Current
Boilermaker /Coded Welder
OSOS ALLIANCE (SGS CONTROL SOLOMON POWER STATION PROJECT SOLOMON FMG SITE)
06.2022 - 11.2022
Boilermaker /Coded Welder
OSOS ALLIANCE (Thyssenkrupp STOCKER ANDERSON FMG SITE)
01.2022 - 06.2022
Boilermaker/ Coded Welder
OSOS Alliance PTY LTD
08.2021 - 01.2022
Boilermaker /Coded Welder
CLOUGH
02.2021 - 05.2021
Shutdown Boilermaker Welder /MEM Boilermaker Welder
Linkforce Engineering
12.2018 - 01.2021
Boilermaker/Coded Welder
G&G Mining Fabrication
06.2018 - 09.2018
Boilermaker/Coded Welder
Gregory Fabrication
02.2016 - 06.2018
Fabrication Welder
OZCON INDUSTRIES PTY LTD
01.2014 - 01.2016
Fabrication/ Welder
Kotobuki Kogyo Company
08.2008 - 08.2011
Saint Agnes High School
Aluling Elementary School
Similar Profiles
Sony Raj SSony Raj S
Java Lead Engineer at Incredible Visibility SolutionsJava Lead Engineer at Incredible Visibility Solutions
Karthik PrabhakarKarthik Prabhakar
Technical Support Manager at Incredible Software SolutionsTechnical Support Manager at Incredible Software Solutions
Lachlan StottLachlan Stott
Senior Excavator Operator/ Truck Driver at PWS poly welding solutionsSenior Excavator Operator/ Truck Driver at PWS poly welding solutions