Anthony Hermosura
Midvale
Summary
Forward-thinking Boilermaker with commercial and industrial boiler experience. Offering more than 10 years of inspecting, testing and troubleshooting boilers, tanks and pressure vessels. Expert in boilermaker equipment safety and maintenance.
Boilermaker knowledgeable in reading blueprints and specifications. Looking to bring further success to a company through troubleshooting and a dedication to learning.
Skilled boilermaker with solid safety record and over 10 years of experience in accurately performing boilermaker repair and maintenance duties. Flexible and diligent with positive attitude and willingness to go above and beyond.
Overview
21
21
years of professional experience
1
1
Certification
Work History
Boilermaker/welder
Progress Rail
02.2025 - Current
- Boilermaker for Rail Technology Project of BHP. Interpret engineering drawings of the different components to be fabricated and to be welded onto the locomotive for broken rail detection testing like heavy 20 mm plates and pipes using flux cored mig and stick welding for welding process according to the specs, air arc gauging to remove old components oxy cutting, grinding, pre heat before welding1f, 2f ,3F,4f 1G, 2G,3G,4G all weld must be done with quality and past third party welding inspections all the welds through MPI and UT.
- Identified issues and addressed each immediately with job foreman.
- Dismantled equipment or devices to gain access and remove defective parts or components.
- Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
- Inspected equipment and structures to determine scope of work (SOW).
Boilermaker/welder
Liebherr Australia Perth
12.2023 - 02.2025
- Company Overview: Mining Division
- Fabricate Liebherr R9600, R996,R9400 buckets starting from floor assembly Fit and weld, installing wear strips both internal and external fit and weld Installing heel blocks, GET keepers, wear package on wall both internal and external fit and weld upper and lower router, welding on lip to floor both inner and outer. Welding of floor to back roll. welding on ears to back roll and hook up box, welding on upper router to hook up box. Welding on lifting lug to back roll. Refurbish on hook ups starting on crack repairs, gouging old components such as upper router and back roll, repair the ears and re prep both ends of the hook up box. Refurbish on stick starting from crack repairs and removing the front casting and install new casting fit and weld, removing bore liner by gouging. Performing crack repairs on boom, Centre girder and track frames starting from using air arc gouging and MPI then weld the cracks and perform MPI after welding the cracks. Bucket refurbish starting from removing old components such as wear strips, heel blocks, GET keepers, and wear package using air arc gouging and installing new components fit and weld.
- Interpreted blueprints, sketches, and specifications for each job.
- Used hand signals to notify crane operator to lift components to specific positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Prepared welding equipment to perform advanced welding work.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Inspected welds for accuracy and conformance to specifications.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
Boilermaker/welder
Komatsu
06.2023 - 12.2023
- Interpret engineering drawings on the components to be fabricated such as handrail, gates steps and ladders, rock ejectors and other parts of tray. Crack repair on the bell crank lifting arm, pre heat the components before gouging out tracks and washers perform MPI after cleaning the gouge area and pre heat before and post heat after welding the cracks and installing new washers. Installing wear liners. Removing old wear plate on the bucket by air arc gouging and installing new ones.
- Identified issues and addressed each immediately with job foreman.
- Inspected equipment and structures to determine scope of work (SOW).
- Inspected equipment, structures and materials to identify cause of errors.
- Used hand signals to notify crane operator to lift components to specific positions.
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
- Inspected welds and checked critical measurements to meet specifications.
- Prepared welding equipment to perform advanced welding work.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
Boilermaker/welder
Progress Rail
08.2022 - 06.2023
- Boilermaker for Rail Technology Project of BHP. Interpret engineering drawings of the different components to be fabricated and to be welded onto the locomotive for broken rail detection testing like heavy 20 mm plates and pipes using flux cored mig and stick welding for welding process according to the specs, air arc gauging to remove old components oxy cutting, grinding, pre heat before welding1f, 2f ,3F,4f 1G, 2G,3G,4G all weld must be done with quality and past third party welding inspections all the welds through MPI and UT.
Boilermaker/welder
Gemco Rail
12.2015 - 08.2022
- Bogie overhaul wagon and locomotive repair and maintenance, inspection of cracks and worn and carriesthe side frame and bolster by using MPI, then removing the manganese wear plates by using air arc gouging and weld new manganese wear plates using stainless steel and fluxcored 711 for bissalloy wear plates, weld using cobalarc 350 and fluxcored for hard facing all the of components to a finish state remove and replace worn or damage components read drawings and carries out metal fabrications of the components and ensure that all the welding is to a standard of AS4280. Wagon repair shunt wagon into the workshop then conduct inspection on cracks or broken parts of the wagon from A end to B end check the coupler and drag box for cracks, worn and missing wear plates using MPI. Carry out oxy cutting, air arc gouging and welding procedures to a rolling stock equipment and worn surfaces, conduct air leak test onto the train pipe by using test rig, welding the train pipe using stainless steel mig. Repairing rail tankers using aluminium welding, drain any remaining fuel then commence degassing procedure then inspection team will mark out any cracks, leaks, and welding defect, then using aluminium welding to fix all the defects cracks, leaks, welding porosity.
Welder fabricator
Park Body Builder
07.2015 - 12.2015
- Company Overview: vehicle body and tray builder
- Building, fabricating, and assembling different kinds of van body, tray, and curtain sider Start from materials needed like channels and rhs and pipe cutting material using band saw for The exact measurements for main runners, cross member and side coaming and assemble all Together for the base for the body of tray, curtain sider and van using mig welding and safety Operational handling of power tools like grinders, drills, circular saw, during building the truck Body van, tray, and curtain sider. Measuring the dimension using tape measure and square. Also Using cutting tools like plasma and oxy-acetylene gas.
- Vehicle body and tray builder
flux cored welder/boilermaker
Mills and Hassal
04.2015 - 07.2015
- Company Overview: Structural building Supply
- Welding and fabricating different kinds of building parts like building frames, building trusses, building footings and columns using I beam, square hollow section, rectangular hollow section,100 nb pipe 5-20 mm plate. Cutting all these materials using band saw and oxy-acetylene gas and assemble according to the design. Welding using flux cored according to standard then check or any defect in welding get rid of the flux clean the bead using chipping hammer and grinder.
- Structural building Supply
Aluminum Welder/ Fabricator
Austal Ships
10.2014 - 03.2015
- Company Overview: Ship Building
- Building, fabricating, welding and assembling different parts and sections of a ship namely frames, bulkhead, deck and mast using aluminum parts and welded using aluminum MIG and TIG machine. Interpreting engineering drawing prior to fabrication. Using various measuring tools for precise building. Ensuring safety and health during construction process and when using power tools such as miller, grinder, sabre saw, circular saw and die grinders.
- Ship Building
Boilermaker/Welder/Fabricator
TL Engineering Truck Division
05.2011 - 09.2014
- Company Overview: Vehicle Body Builder
- Building and repairing different kinds of truck body and trailers, fabricating tray for both trucks and utility vehicle starting from cutting the exact dimension of main runners, cross member, side coaming, rope rails, cab protection, checkered plate or plane plate for the floor and accessories for all kinds of trucks. Fabricating and welding of whole body of a truck including chassis extension and mount for hydraulic legs and crane. Fabricating safety gates, grab rails and three-point contact safety for all trucks. Fabricating explosive box, toolbox, bumpers, roll bars, cab protection and fuel tanks using measuring tools like tape measure, steel ruler, combination square, engineered square, plane square and digital protractor. Using different kinds of cutting tools such as band saw, cutting disk on hand grinder, plasma cutter, oxy- acetylene gas cutting, hand drill machine and hydraulic bender. Using MIG welding flux cored welding, stick welding and TIG welding. Fabricating aluminum gates and modifying fuel tank using aluminum TIG welding. Working with technical drawings.
- Vehicle Body Builder
1st Class Welder/ Boilermaker
Babcock- Hitachi
02.2006 - 01.2009
- Company Overview: Manufacturing/ Production
- Performs different kinds of welding jobs in the pressure parts of the coal fired power plant like assembling of panel, it is composed of flat bars and tubes with different shapes and used MMAW and GTAW to weld. Accurately fitting the flat bars and tubes according to the designs by using different engineering measuring tools. Using tools such as pneumatic grinders chippers and steel brushes to clean the welded surface. Assembling of headers which are composed of combination of pipes, setting and fitting of the pipes. GTAW and MMAW and flux cored are used for welding jobs.
- Manufacturing/ Production
Welder/ Fabricator
Aluminum/ Glass & Steel Works
08.2004 - 12.2005
- Fitting and welding of jeepney and tricycle chassis and body using SMAW and oxy- acetylene. Fabricating of steel gates, steel fences, steel tables and chairs using SMAW. Heating round and flat bars to bend in different shapes using oxy- acetylene. Cutting materials using oxy- acetylene gas cutting and electric grinders.
Trainee
Toyota Motors- Philippines
01.2004 - 06.2004
- Company Overview: Automobile/ Vehicle
- Performs different kinds of quality inspections of the different kinds of automotive parts before assembly. Also perform inspections in welding assemble section.
- Automobile/ Vehicle
Education
Certificate III in Engineering- Fabrication Trade - Welding
Skills
- Component fabrication expertise
- Experienced with boilermaker tool applications
- Installation of structural fittings
- Troubleshooting mechanical systems
- Proficient in multiple welding techniques
- Skilled in metal fabrication techniques including cutting and grinding
Certification
- Certificate III in Engineering- Fabrication Trade (Welding), MEM30305
- Forklift Ticket, WL3281668
- Dogging, WL3281668
- Construction White Card, 764836
- Enter and Work in Confined Spaces, RIIWHS202D
- Work Safety at Heights, RIIWHS204D
- Operate a gantry or overhead crane, RIIHAN305D
- Elevated Work Platform, 3281668
- Welding codes, AS/NZS 1554.1 3G,4G
- Welding codes, AS/NZS 3992/1665
- Firefighting training, CPPFES2005
- First aid training, HILTAID009-011
- Work safely, MSMWHS200
- Analyze manual handling process, MSS403032
- BHP Inducted
Timeline
Boilermaker/welder
Progress Rail
02.2025 - Current
Boilermaker/welder
Liebherr Australia Perth
12.2023 - 02.2025
Boilermaker/welder
Komatsu
06.2023 - 12.2023
Boilermaker/welder
Progress Rail
08.2022 - 06.2023
Boilermaker/welder
Gemco Rail
12.2015 - 08.2022
Welder fabricator
Park Body Builder
07.2015 - 12.2015
flux cored welder/boilermaker
Mills and Hassal
04.2015 - 07.2015
Aluminum Welder/ Fabricator
Austal Ships
10.2014 - 03.2015
Boilermaker/Welder/Fabricator
TL Engineering Truck Division
05.2011 - 09.2014
1st Class Welder/ Boilermaker
Babcock- Hitachi
02.2006 - 01.2009
Welder/ Fabricator
Aluminum/ Glass & Steel Works
08.2004 - 12.2005
Trainee
Toyota Motors- Philippines
01.2004 - 06.2004
Certificate III in Engineering- Fabrication Trade - Welding
Similar Profiles
Noah HolmesNoah Holmes
General Labor & Tear Down at Progress RailGeneral Labor & Tear Down at Progress Rail
Edward BellEdward Bell
Storeman at Progress RailStoreman at Progress Rail
Aaron StottAaron Stott
Car Repairer at Progress RailCar Repairer at Progress Rail
Kelsey ParkerKelsey Parker
Sales Service Representative at Mondelez InternationalSales Service Representative at Mondelez International
Deacon PhillipsDeacon Phillips
Bakery Clerk at The Honey Suckle Coffee Co.Bakery Clerk at The Honey Suckle Coffee Co.