Carlos Joshua S. Ner
Maddington,WA
Summary
Experienced with surface preparation techniques, ensuring high-quality finishes. Utilizes knowledge of safety protocols and equipment maintenance to enhance productivity and safety. Track record of delivering consistent results in various industrial environments.
Pursuing full-time role that presents professional challenges and leverages interpersonal skills, effective time management, and problem-solving expertise.
Overview
10
10
years of professional experience
1
1
Certification
Work History
Industrial Sand Blaster
Polyurea WA
01.2025 - 10.2025
- Trained junior staff on equipment usage and safety best practices.
- Assisted in inventory management of blasting materials, ensuring adequate stock levels for operations.
- Established a culture of continuous improvement within the team by encouraging feedback and implementing suggestions for process enhancements.
- Ensured quality control with meticulous attention to detail during the sandblasting process, resulting in fewer defects and rework instances.
- Minimized environmental impact by utilizing eco-friendly blasting materials whenever possible while still maintaining desired results.
- Selected surfaces for blasting and masked specific parts.
- Set up portable sandblasters and maintained clean and safe work zone.
- Maintained abrasive blasting equipment and performed minor repairs.
- Determined accurate mixtures and times for sandblasting to meet desired finish.
- Masked, grit blasted or chemically rinsed surfaces to prepare for sandblasting.
- Met production targets and tight deadlines by collaborating closely with team members.
- Used problem-solving and issue-resolution skills to promptly and successfully address production problems.
- Collaborated with other departments to optimize production workflows.
- Maintained organized work area by cleaning and removing hazards.
- Made sure that products were produced on time and are of good quality.
- Organized and prepared workstations and materials needed for operations to maximize productivity.
- Operated sandblasting equipment to prepare surfaces for coating and finishing.
- Ensured adherence to safety protocols and maintained a clean work environment.
- Monitored quality of blasted surfaces to meet project specifications consistently.
- Implemented process improvements that streamlined workflows and reduced downtime.
- Conducted regular maintenance checks on sandblasting machinery to ensure optimal performance.
- Enhanced equipment longevity by performing regular maintenance checks and timely repairs on sandblasting machinery.
- Demonstrated commitment to safety by maintaining an accident-free work record throughout tenure in the role of Industrial Sand Blaster.
- Reduced downtime with proactive troubleshooting and quick identification of potential issues in sandblasting equipment.
- Maximized equipment effectiveness with routine calibration checks, ensuring optimal performance at all times.
- Stayed current with industry advancements by attending relevant workshops, seminars, and trade shows to maintain up-to-date knowledge on new technologies and best practices in sandblasting techniques.
- Streamlined workflow processes by developing effective communication channels between team members, leading to increased productivity and efficiency.
- Conducted thorough pre-blast inspections to ensure proper setup of equipment prior to commencement of work activities.
- Maintained a safe work environment by adhering to safety protocols, wearing appropriate protective gear, and conducting regular safety training sessions for team members.
- Optimized material usage through precise calculation of blasting media requirements for each job, minimizing waste and lowering project costs.
- Enhanced team performance through consistent mentoring and coaching of junior staff members, fostering professional growth and skill development.
- Assembled products according to changing daily work orders and specific customer needs.
- Performed general equipment maintenance and repair to minimize downtime.
- Prepared reports and technical documentation of day-to-day production processes.
- Investigated processing errors and malfunctions, resolving issues with minor machine repairs.
- Reviewed production schedules and streamlined processes.
- Tested products or subassemblies for functionality or quality and troubleshot problems with equipment, devices, or products.
Welder
Boomerang Engineering
07.2024 - 12.2024
- Welded in flat, horizontal, vertical, and overhead positions.
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Prepared welding equipment to perform advanced welding work.
- Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Reduced workplace accidents through strict compliance with safety regulations and guidelines.
- Increased production efficiency with expert time management skills and adherence to project deadlines.
- Delivered high-quality customer service as a reliable and skilled welder, contributing to positive company reputation and repeat business.
- Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
- Streamlined work processes through effective communication with supervisors and team members about project requirements and progress updates.
- Addressed potential hazards or equipment malfunctions to prevent serious problems.
- Mentored junior welders, sharing knowledge to enhance their skill sets and career development.
- Enhanced aesthetic appeal of final products with skilled finishing techniques for smooth and clean welds.
- Increased operational lifespan of equipment with regular maintenance and timely repairs.
- Optimized welding supply inventory, preventing project delays by ensuring all necessary materials were on hand.
- Contributed to environmental sustainability by implementing metal recycling practices in workshop.
- Solved complex welding challenges by applying specialized techniques in MIG, TIG, and Stick welding.
- Facilitated cross-department communication, ensuring projects stayed on schedule with clear updates and coordination.
- Ensured compliance with all regulatory standards, keeping documentation updated and accessible.
- Conducted rigorous post-weld inspections to guarantee structural integrity of each piece.
- Streamlined workshop operations, organizing tools and equipment for easy access and efficient workflow.
- Reduced material waste with careful planning and accurate cutting of metal components.
- Increased efficiency in metal fabrication with precise welding techniques for complex assemblies.
- Improved customer satisfaction by delivering custom welding projects ahead of scheduled deadlines.
- Maintained high standard of quality control, ensuring all welds met or exceeded industry standards.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Welded various connections with high-quality final results.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Evaluated and tested various soldering materials for accuracy.
- Replaced faulty parts and components in soldering process.
- Suggested improvements to soldering process to increase efficiency.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Inspected parts and components for defects in soldering process.
Industrial Sand Blaster
New Metal Surfaces
04.2021 - 06.2024
- Operated sandblasting equipment to prepare surfaces for coating and finishing.
- Ensured adherence to safety protocols and maintained a clean work environment.
- Collaborated with team members to optimize workflow and enhance productivity.
- Monitored quality of blasted surfaces to meet project specifications consistently.
- Implemented process improvements that streamlined workflows and reduced downtime.
- Conducted regular maintenance checks on sandblasting machinery to ensure optimal performance.
- Improved project turnaround time by efficiently managing resources and streamlining the sandblasting process.
- Delivered customized solutions for clients'' specific surface preparation needs using a variety of industrial sandblasting techniques.
- Exceeded client expectations for finished product quality with precision surface preparation techniques and attention to detail during sandblasting operations.
- Provided valuable technical input during project planning stages, assisting in accurate estimation of work scope, resource allocation, and timelines for completion.
- Enhanced equipment longevity by performing regular maintenance checks and timely repairs on sandblasting machinery.
- Reduced downtime with proactive troubleshooting and quick identification of potential issues in sandblasting equipment.
- Demonstrated commitment to safety by maintaining an accident-free work record throughout tenure in the role of Industrial Sand Blaster.
- Maximized equipment effectiveness with routine calibration checks, ensuring optimal performance at all times.
- Stayed current with industry advancements by attending relevant workshops, seminars, and trade shows to maintain up-to-date knowledge on new technologies and best practices in sandblasting techniques.
- Streamlined workflow processes by developing effective communication channels between team members, leading to increased productivity and efficiency.
- Increased client satisfaction rates by delivering high-quality surface finishes within specified deadlines.
- Conducted thorough pre-blast inspections to ensure proper setup of equipment prior to commencement of work activities.
- Maintained a safe work environment by adhering to safety protocols, wearing appropriate protective gear, and conducting regular safety training sessions for team members.
- Optimized material usage through precise calculation of blasting media requirements for each job, minimizing waste and lowering project costs.
- Developed and maintained strong client relationships through clear communication, timely project updates, and prompt resolution of any issues that arose during the project lifecycle.
- Enhanced team performance through consistent mentoring and coaching of junior staff members, fostering professional growth and skill development.
- Contributed to superior project outcomes by collaborating effectively with team members and other departments involved in industrial projects.
- Assembled products according to changing daily work orders and specific customer needs.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Performed general equipment maintenance and repair to minimize downtime.
- Prepared reports and technical documentation of day-to-day production processes.
- Investigated processing errors and malfunctions, resolving issues with minor machine repairs.
- Reviewed production schedules and streamlined processes.
- Tested products or subassemblies for functionality or quality and troubleshot problems with equipment, devices, or products.
2nd Class Welder
RRM Group
11.2020 - 03.2021
- Continuously improved skillset through participation in professional development opportunities related to welding best practices.
- Supported supervisors in scheduling projects efficiently based on available resources and project timelines.
- Increased productivity with effective time management, completing assigned tasks in a timely manner.
- Enhanced workplace safety by keeping work areas clean and free of hazards at all times.
- Contributed to quality control processes by inspecting finished welds and making necessary adjustments when needed.
- Assisted with the training of new welders, sharing knowledge and providing guidance to enhance their skills.
- Achieved high-quality welds by following welding procedures and using appropriate tools.
- Streamlined workflow efficiency by organizing tools and materials needed for each specific task.
- Promoted a positive work environment by actively participating in team discussions and offering constructive feedback to peers.
- Verified tool and equipment installation.
- Set up manual weld machine or downloaded program per set up sheet instructions.
- Reviewed weld requirements from weld prints.
- Contributed to cost savings through diligent use of materials and minimizing scrap waste during fabrication processes.
- Completed complex fabrication jobs by reading blueprints and translating them into precise welds.
- Performed routine maintenance on welding equipment, ensuring optimal performance and reducing downtime.
- Fabricated shop parts directly from blueprints.
- Prepared welding equipment to perform advanced welding work.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Chipped off excess weld, slag, and spatter using hand tools.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Inspected parts and components for defects in soldering process.
Fabrication Welder
Commander Ag-quip
07.2019 - 10.2020
- Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
- Maintained high-quality workmanship through consistent attention to detail and adherence to specifications.
- Maintained clean and organized work area to prevent workplace accidents.
- Read and followed blueprints and weld diagrams.
- Finished welding and fabrication projects using grinders.
- Utilized various tools, such as grinders and cutting torches, for proper preparation of materials prior to welding processes.
- Used cutting torches to shape and cut metal for fabrication projects.
- Demonstrated versatility in welding techniques, applying appropriate methods for each specific project requirement.
- Communicated with supervisors and engineers to verify quality of finished work met specifications.
- Reviewed blueprints and schematics to ensure accurate fabrication according to design specifications.
- Prepared surfaces for welding by smoothing and removing debris to achieve proper adhesion and weld quality.
- Documented welding on specified work order.
- Contributed to the successful completion of large-scale projects by efficiently collaborating with multidisciplinary teams.
- Performed preventative maintenance and minor repairs on welding and fabrication equipment to keep in optimum working condition.
- Ensured safety compliance by adhering to industry standards and company guidelines in all tasks performed.
- Increased customer satisfaction with timely delivery of high-quality products that met or exceeded expectations.
- Inspected parts and components for defects in soldering process.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Replaced faulty parts and components in soldering process.
- Monitored and documented soldering results.
Meat Processor
Fletcher International
02.2016 - 06.2019
- Operated and maintained processing equipment to ensure optimal functionality and safety standards.
- Conducted quality inspections of meat products to meet regulatory compliance and customer satisfaction.
- Collaborated with team members to streamline workflows, reducing processing time and enhancing productivity.
- Implemented sanitation procedures to maintain cleanliness in the production area and prevent contamination.
- Developed process improvements that enhanced efficiency while maintaining compliance with industry regulations.
- Maintained sharpness of tools for precise cuts and optimal safety during meat processing tasks.
- Achieved compliance with all health regulations through diligent attention to cleanliness standards during processing operations.
- Reduced waste and improved yield through careful monitoring of cutting and trimming procedures.
- Participated in ongoing training initiatives to stay current on industry trends and best practices for meat processing operations.
- Collaborated with team members to maintain a clean, organized, and safe work environment.
- Ensured consistent product quality by adhering to strict sanitation standards and company guidelines.
- Mitigated risk of cross-contamination by strictly adhering to company guidelines on separation protocols for different types of meats.
- Increased customer satisfaction by accurately fulfilling custom orders and special requests.
- Supported efficient workflow by promptly identifying equipment malfunctions and facilitating quick repairs or replacements as needed.
- Enhanced production efficiency by implementing streamlined meat processing techniques.
- Cut meat products with slicing equipment according to size specifications.
- Processed meat by cutting, sorting parts, deboning and grinding.
- Inspected meat to perform quality assurance checks.
- Sanitized surfaces to maintain cleanliness of food service area.
- Packed meat in Styrofoam, plastic and paper packaging and weighed on scale for pricing.
- Prepared various meats by cutting, trimming and packaging in preparation for display cases.
- Inspected equipment, checking for proper functioning and safety.
- Cut meats to customer specifications and answered questions about specialty products.
- Monitored meat inventory in cases, restocking with fresh products when needed.
Education
High School Graduate -
Albany Senior High School
Albany, WA11.2018
Skills
- Industry awareness
- Strong organization
- Issue resolution
- Company processes and procedures
- Multitasking Abilities
- Organizational skills
- Time management
- Multitasking
- Active listening
- Teamwork
- Problem-solving
- Forklift operation
- Forklift operator certification
- Loading and unloading
- Shipping and receiving
- MIG welding
- Pipe welding
- Grinders
- Grinding and finishing techniques
- Proper equipment handling
- Reliability and punctuality
- Protective gear usage
- Structural integrity assessment
Certification
- Driver License
- White Card
- License to perform High Risk Work (LF)
- Working at Heights
- Confined Space
Timeline
Industrial Sand Blaster
Polyurea WA
01.2025 - 10.2025
Welder
Boomerang Engineering
07.2024 - 12.2024
Industrial Sand Blaster
New Metal Surfaces
04.2021 - 06.2024
2nd Class Welder
RRM Group
11.2020 - 03.2021
Fabrication Welder
Commander Ag-quip
07.2019 - 10.2020
Meat Processor
Fletcher International
02.2016 - 06.2019
High School Graduate -
Albany Senior High School