Cheynne Mitchell

Brisbane, Mackay, Townsville, Gold Coast

• Install pressure piping, steam boilers and thermal oil boilers
• Measure and design site run piping and valve trains
• Generated reports detailing findings and recommendations.
• Organise daily works and liaise with clients
• Monitored workflow to improve employee time management and increase productivity.
• Applied strong leadership talents and problem-solving skills to maintain team efficiency and organize workflows.
• Identified unsafe or unhealthful workplace conditions or hazards to enforce safe work practices and procedures.
• Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
• Delivered services to customer locations within specific timeframes.

Carpenter/Dogman

• Read and interpreted blueprints and construction documents to determine project directives.
• Ensured compliance with building codes and regulations through diligent adherence to industry best practices and guidelines.
• Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
• Expedited project timelines by efficiently prioritizing tasks and managing resources effectively.
• 20+ 22 tonne Franna & 130 + Slew Crane
• Collaborated closely with architects, engineers, and other trades professionals to deliver cohesive project outcomes aligned with client expectations.
• Managed inventory of tools, supplies and equipment.
• Worked flexible hours across night, weekend, and holiday shifts.
• Demonstrated strong organizational and time management skills while managing multiple projects.

• Tank floor replacement and inspections
• Major shutdown coordinations
• Generate permits and work packs for work crews
• Generated reports detailing findings and recommendations.
• Devised and implemented processes and procedures to streamline operations.
• Oversaw daily operations of the department, ensuring smooth workflow and timely completion of tasks.
• Inspect all isolations and safety gear
• Communicate with plant operations and adjacent contractors
• Identified operational inefficiencies and implemented corrective measures, leading to an overall increase in effectiveness.
• Gained strong leadership skills by managing projects from start to finish.

Queens Wharf Casino Project

• Carpenter/Dogman
• Dile capping, basement structures through to level 32
• Conventional formwork and barrier screens, tower cranes and mobile cranes
• Demonstrated close attention to detail to verify quality and accuracy of work.
• Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
• Followed established job site safety regulations and maintained safe and clean work area.

Fitter TA/Dogman Rigger

• Work in highly hazardous areas, using B/A
• Cleaning and inspecting storage tanks
• Lock on to isolations and comply with permit procedures
• Developed safe and efficient workflows for construction projects.
• Decommission pumps and replace pipework
• Punch list and commission plant for operations
• Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.

Mechanical TA/Dogman

• 20 tonne franna, 250 rought terrrain crane
• Unload and bolt mechanical components together
• Torque, flange management and tagging
• Stainless steel press fit service lines
• Formwork and structural grouting
• Compressor pump installation
• Make furnishings and mobilisation
• Performed maintenance and minor repairs to various machines under supervision.

Carpenter/Rigger

• Level 3 carpark underground with ramps and pump station
• Build jumpform, walls, curves columns, large beams and stairs
• Level safe work screens
• Demonstrated close attention to detail to verify quality and accuracy of work.
• Planned projects by identifying necessary equipment, tools, and required assistance.

Fitter/Dogman

• Check isolations
• Complete permits, air and oxygen level testing
• Working in hazardous areas wearing full chemical suits and breathing apparatus to break apart pipework and install new pipework
• Clean sulphur boilers and check lines
• Repair stacks, dampeners and ducts
• Clean and inspect acid storage tanks

Sunshine Coast Airport Expansion

Leading Hand/Formwork/Steel Fixing

• Mark out excavations
• Establish RL
• Pour Blinding
• Edgeboards
• Apron slabs rebates for box culverts
• Wing Walls
• Tie Steel
• Place and screed concrete to height
• Mix grout and land box culverts
• Organise crew for daily works and report to supervisor
• Keep work area clean and safe

Formwork/Dogman

• Conventional framing for beams and class 1 decks
• Ishuebeck system for decks, columns, lift shafts, shearwalls, updstand walls, up turnbeams, ramps, kerbs, falsework
• Liffting shutters with small crane

• General formwork
• Table forming
• Framework
• Decking
• Installing generators, water pumps and pipework
• Staircores lift shafts
• Upstandwalls jug handle ramps
• Shear Walls
• Columns
• Kirbing
• All conventional formwork
• Laser levelling
• Managed inventory of tools, supplies and equipment.
• Communicated daily with job site supervisor to discuss milestones and update project schedule.

Mechanical Fitter / Hydrostatic/Pneumatic Testing

• Navigate maps and comply with State and SANTOS road rules to locate well pads
• Check pipe work with drawings
• Organise and be responsible for working under Green or Brownfields permits, monitoring gas dectectors
• Interpret P&I drawings Isometric plans, piping test packs to identify pipe spools for testing,
• Pneumatic leak tests on seperators Set up manifolds and gauges for testing
• Dismantle and remove spools, preservation,Rigging and lifting spools and valves with crane
• Inspect flange faces,gaskets and fittings
• Prep and clean pipes for welding
• Bolt and torque blinds to spools, flange management
• Prestart all pumps and mechanical equipment
• Fill test with water and bleed air , pressurize and check for leaks
• Reinstate pipework torque and tag
• Prep and paint pipes
• Flange management
• Commissioning /isolations
• Attend daily prestarts and weekly toolbox meetings
• Record all data from test using Chrystal Guage,
• Keep crew trucks clean and complete weed declerations

• Interperate site and engineers plans for footings ,slabs,plinths and colums,build formwork, tie in reinforcing steel and cages with holddown bolts,establish heights off an RL,pour and finish concrete,
• Install strusctural steel,pipe racks and torque bolts
• Design, fabricate and install site run S/S mapress pipe system, from existing diesel farm through existing processing plant and controlled areas to holding tanks in the concentrator area,
• Shutdown diesel service to mine, disamble existing spools reinstate new bolt up spools ,valves , gates and actuaters, assist with pipe support fabrication,
• Liase with mine operations and area supervisers to co ordinate area shut downs and permits with safety rescue plans in controlled radiation areas, to install pipework and supports,
• Install and fabricate screwed and pressfit pipe (blucher nova press) , from isometric drawings, connecting pumps to holding tanks, sumps, boilers and compressors
• Isolations for commissioning,hydrotesting and punch list items, bolt on ai instrumentation,
• Attend ,daily prestarts , weekly toolbox meetings , workers representative for project improvments,at meetings with construction and project managers, write JHA’s for areas and specific tasks, report to supervisor
• Complied with Rio Tinto and ERA site policies and procedures,

• Pipe Fitting, Rigging and installation of associated pumps, pipe work and structural steel modules in the tailings processing area of the CHPP plant
• Site run of S/S Victaulic and Rolled Grooved piping and associated pipe supports
• Fabrication and installation of screwed service lines, Air, Water, Fire
• Involved with construction of Tailing and Coal Thickener Tanks and vessels
• Torqueing of pipework during punch listing stage of project
• Working at heights
• Working off isometric drawing while punch listing of piping systems
• Flange management
• Commissioning
• Attend weekly toolbox meeting
• Involved in the construction of work method statements and JHA’s for task
• Report to supervisor
• Complied with BMA and Bechtel site policies and procedures

• Responsible for the construction of the Jacking Box (World’s Largest Construction) including Blade/Shield Walls and Mining Box
• Erecting of Peri formwork, RMD formwork and conventional formwork
• Pouring of concrete
• Flange management
• Isolations
• Hotbolting
• Pressure testing
• Commissioning
• Attend morning toolbox meetings
• Pre starts
• Completion of all associated paperwork including timesheets in a timely and efficient manner
• Report to supervisor
• Compliance with occupational health and safety regulations in accordance with Thiess/John Holland guidelines, policies and procedures

• Responsible for all aspects of carpentry for the construction of Kenya 1 (800 pax) and Kenya 2 (1000 pax) accommodation camp at Windabri gas fields
• Site setout
• Attend morning toolbox meetings
• Installation of water pipes
• Spotting for excavator and bobcat operators
• Construction of footings and slabs for pipe stands and compressors
• Construction of kitchens, all decking around dongers and offices
• Compliance with occupational health and safety regulations whilst onsite

• Responsible for the construction and renovations of domestic properties including luxury homes and replication of new set house on a macadamia farm
• Liaise with architect, clients and other tradespersons
• Measure supply and fit pipework for water extraction and services ,,flange management
• Provision of quotations and estimations
• Ordering of materials and equipment
• Setting out and framework
• Landscaping
• Oversee all works including excavations
• Compliance with occupational health and safety regulations whilst onsite