Ciara SWeeney

• I used the crane truck to transport. Materials are moved from one area to another throughout the project.
• I operated a telehandler in the yard, both offloading and loading flatbed trucks.
• Monitored gauges, indicators, and meters to ensure optimal performance of the plant.

• Dug trenches to level for conduit to be installed later.
• Loaded and moved dirt, rocks, equipment and materials.
• Checked and corrected levels of excavated materials against specifications.
• Used a bobcat to clean up job sites after the completion of each project, ensuring no debris was left behind.
• Augured holes using auger attachment.
• Used tipper truck to move heavy material from one location onsite to another

• Cleaned out drainage ditches by scooping out mud and debris with a backhoe bucket attachment, and loaded the material into articulated dump trucks.
• Loaded and moved dirt, rocks, equipment and materials.
• Checked and corrected levels of excavated materials against specifications.
• Performed daily maintenance on excavator such as checking fluid levels, lubricating parts, and replacing worn or damaged components.

• Dug out pads to level for concrete and formwork.
• Backfilled and rolled material for retaining walls beside the conveyor using a roller attachment.
• Conditioned material.
• Used front-end loader to load material onto trucks for transportation.
• Used a loader to level off ground and push out dirt to level.

• Dug trenches to level for conduit
• Loaded out gravel and other materials for transportation.
• Used the bobcat to level crane pads using a laser level.
• Repaired minor damages to roads using the box blade attachment of the Bobcat skid steer loader.
• Cleaned up job sites after completion of each project ensuring no debris was left behind.
• Performed daily maintenance on Bobcat equipment including checking oil levels and tire pressure.

• Offloaded pipe trucks using a pipe lifter for the IT loader.
• Lowered pipes into the ground using a boom arm for the IT loader.
• Backfilled trenches using the loader and a whacker plate.
• Transported pipes between work areas in a safe manner.
• Assisted the polywelder with pipe movement.

Operated heavy equipment to demolish current structures, remove plants or trees and clear property of debris.

• Loaded and moved dirt, rocks, equipment and materials.
• Operated rollers to compact lifts of dirt, working alongside the grader operator.
• Used a water cart for both dust suppression and to add moisture to lifts for the grader operator.
• Used the bobcat to clear rocks and other debris.
• Loaded articulated dump trucks using the excavator.
• Observed potential hazards and obstructions to maximize safe working conditions.
• Digged holes for fence posts using an auger bit attached to the end of a boom arm on the excavator machine.