Crispin Madaya
Karratha,WA
Summary
Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
21
21
years of professional experience
1
1
Certification
Work History
QA/QC Welding Inspector
RED ROCK ENGINEERING LTD.
07.2023 - Current
- Full welding of pipes and plates
- All butt welds and Fillet weld using a welding process GTAW, SMAW, FCAW, and MIG
- Repaired faults, reassembled products, and completed additional tests.
- Updated quality control records and reports.
- Reviewed specifications in order to assess contractor compliance with design.
- Tested welders for understanding of code and proficiency in different environments.
- Plates 100 visual inspection and 10% MT.
- Expedited project completion by promptly coordinating with other inspectors, supervisors, and managers on necessary adjustments or improvements based on inspection findings.
- Facilitated training sessions for welders and inspectors alike to increase understanding of welding standards and procedures, leading to higher overall proficiency levels.
- Boosted client satisfaction by providing timely feedback on inspection results, while addressing any concerns or questions.
WELDING INSPECTOR
DAEAH E & C
03.2021 - 07.2023
- Inspection of Welding Consumables and Verify the Calibration Certificates of all Welding Equipment
- Preparation of the documents for the Welders WQPT for (Mill Test Certificate) Plate Welders
- Assist the 3rd Party Inspector during final WQPT
- Preparation of documents for the approval of JCC welder's card and submit to Hyundai for signature by SAPID
- Raise RFI for Pre-welding, In-process welding and Post Welding Visual Inspection for the structural activities
- Carried out Internal Post Weld Visual Inspection prior to raise final Post Weld Visual Inspection
- Welder training/refresher for the preparation of incoming WPQT
- Control/monitor of inter pass temperature and heat input of Super Duplex Stainless Steel at site.
QA/QC Welding Inspector
Samsung Engineering Saudi Arabia
- Verifies that assigned mechanical equipment installations are performed in accordance with engineering design requirements, project contract agreements
- Review welding procedure specifications (WPS), procedure qualification record (PQR), and Welder Performance Qualification Test Certificate (WPQT)
- Conduct line walks before Cold Commissioning and Witness Hydro testing/Pneumatic Testing/Leak Testing
- Monitor and inspect mechanical erection & installation activities of subcontractor, in particular related to piping and static equipment in all plant areas (Boiler, STG, ESP, Chimney, BOP), with regards to progress, compliance with the applicable codes/standards, quality, safety, and environmental acceptance
- Witness Welder Performance Qualification Test with Client
- Carried out Post Welding Visual Inspection at Shop and Site
- Carried out inspection all incoming welding consumables and materials as per approved vendor
- Witness NDT (PWHT, PMI, PT/MT/UT) activities, review reports before signing off
- Preparation of ISO drawings for pipings
- Carried out air blowing inspection of pipes prior to erection
- Carried out inspection for pre-installation and pipes laying of pipes at the pipe rack
- Line checking at site and issued punch list for the sub con.
- Maintained a safe work environment with thorough inspections of welding equipment and adherence to safety protocols.
- Followed standard operating procedures for inspections and tests.
- Provided technical support to production personnel.
WELDING INSPECTOR
DAEAH E & C
03.2018 - 11.2019
- Carried out inspection Fit-up (bevel, root face, gap) Post Welding Inspection (before, during and after welding)
- Performing Welder Training at the Welding Training School
- Carried out Material Receiving Inspection of all Welding Consumables
- Controlling of issuance for Welding Consumables to all welders
- Inspection of Welding Consumables Container as per SAES -W-011 requirements
- Preparation of documents for HOT TAPPING PQR, (like MTC for Pipes, Split Tee, and Electrodes)
- Preparation and set-up of equipment (like pipes split tee, pump, water, and compressor for Hot Tapping PQR (Water Simulation) as per API 1104
- Assist of third party inspector during Procedure Qualification Test for Hot Tapping
- Conducting WPQT of welders for Hot Tapping or in-service repair
- Carried out inspection fit-up and post visual inspection of Tie-in and Hot Tapping at the brown field or in the live plant
- (Before, During and After Welding)
- Witness MT or PT after welding of the Tie-in (pipe welding joints) and Hot Tapping (split tee
- Longitudinal Butt Welds (LBW) & Circumferential Fillet welds (CFW) joints
- Witness Welders Performance Qualification Test with Third party (WPQT)
- Preparation of documents like Mill Test Certificate for PQR
- Raise RFI for Pre-welding and Post Welding Visual inspection as per SATIP and SAIC
- Carried Fit-up and Post Visual Inspection together with Maincon and PID
- Review test package.
QA/QC Welding/Piping Inspector
HYUNDAI ENGINEERING & CONSTRUCTION
12.2016 - 03.2018
- Carried out fit-up and welding visual inspection of all pressure parts (tubing and piping) and non-pressure parts
- Checking welding activities conformance to approved Welding Procedure Specifications (WPS) and Welders Qualifications Record (WQR)
- Witnessing & reviewing of nondestructive tests such as radiographic test (RT), Penetrate test (PT), and magnetic particle inspection (MPI)
- Does visual & dimensional inspection of materials; checks correctness of the description & size of pipes, fittings, and supports indicated in the detailed engineering drawing; checks the fit-up, alignment, edge preparation
- Welding allowance & tolerances, etc
- Based on standards & customers' requirements
- Review welding procedure specifications (WPS), procedure qualification record (PQR), and welder qualification test (WQT)
- Witnessing destructive tests such as tension test, guide bend test, impact test, and hardness test.
QA/QC Welding Inspector
Samsung Engineering Saudi Arabia
11.2010
- Perform daily inspection of quality activities on capital projects covering welding and installation of pressure vessel piping and auxiliary facilities of INLET and GAS TREATMENT PROJECT
- To ensure that all operations are carried out in complete compliance with Procedures, Client Specifications, and International codes
- Review all welding procedure specifications (WPS&PQR) and also witness all welder's qualification testing and weekly monitor welder's performance against rejection rate
- Ensures that all welders are fully qualified to the procedures required by the project standards, and that their qualifications are current
- Supervise subcontractor inspection team and advice welding technique to minimize weld rejection
- Visually verifies that the incoming materials have met the requirements for welding works, such as quality and dimensional tolerance levels, witnessing qualifying tests for welders as required
- Review all QCP (Quality Control Procedure) and ITP or SATIP (SAUDI ARAMCO TYPICAL INSPECTION PLAN) and implementation for all activities as required
- Carry out an analysis of the defect/repair and advice welder of probable cause
- Initially review some of radiographic film for clarification of defects with RTFI, and advise repair in accordance to code and approved WPS.
QA/QC Structural/Welding Inspector
Samsung Saudi Arabia
01.2008 - 11.2010
- Reviews inspection & test plan for inspection procedure & scope of work
- Verifies mill certificate and other related reports of incoming raw materials in conformance to applicable codes and standards
- Checking materials received for completeness and if the materials received specify the heat number and the shop mark indicated in the product turnover sheet
- Does visual & dimensional inspection of materials; checks correctness of the description & size of pipes, fittings, and supports indicated in the detailed engineering drawing; checks the fit-up, alignment, edge preparation
- Welding allowance & tolerances, etc
- Based on standards & customers' requirements
- Checking welding activities conformance to approved Welding Procedure Specifications (WPS) and Welders Qualifications Record (WQR)
- Provide data or reports pertinent to quality and safety issues to QA/QC Manager
- Monitor and handle the welder's qualification Testing and welders qualification
- Prepare methods of statements, ITP & reporting formats for sites and coordination for subsequent approval to client if any conflict drawings as per site condition
- Initiate Non Conformance Report (NCR) or Corrective Action Report (CAR)
- Perform as-built drawing during punch listing as per site condition and submit to engineering construction for final documentation of test packages.
Welder Gtaw / Smaw
Daewoo E&C
06.2003 - 02.2004
- Full welding of pipes like Carbon Steel, Stainless Steel, Hastelloy, Monel, Duplex
- Electrode used are ER 70S-3 and E7018
- Electrode for S/S ER316l and 308L
- Electrode for Hastelloy ERNiCrMo-10
- Electrode for Monel ER NiCu-7, Electrode for Duplex ER2594
- All joints are 100% RT
- Monitor and assist of all welder.
Education
Bachelor of Science in Mechanical Engineering, Don Andress Soriano National High School, CIT UNIVERSITY CEBU 1991-1992 (UNDERGRAD) Proceed to ETEEAP @ USJR online Class.
Skills
- Forklift Training
- Component Fabrication
- Quality Control
- Good Manufacturing Practices
- Visual Inspection
- Safety awareness
- Heat treatment knowledge
- Welding Inspection Expertise
- Welding Process Selection
- Non-Destructive Testing Knowledge
Certification
- CSWIP Level 2, 530496 new renew, 03/02/22
- NDT LEVEL2, UT, MT, PT & RT, 03/01/27
- TRA CERTI, CERTIFICATE III in Engineering ( Fabrication Trade Welding)
- Aramco SAP NO, Series 80013838
Positiondesired
- PRESSURE WELDER/BOILER MAKER WELDER
- WELDING INSPECTOR
Birthplace
Cebu City, Cebu, Philippines
Personal Information
- Status: Married
- Passport Number: P8013914B
- Date of Birth: 09/12/71
- Nationality: Filipino
Applicantname
CRISPIN PREMOR MADAYA
Training
- CSWIP 3.1 Welding Inspector - Level 2
- Pearsun vue Welding Inspector and NDT
- ASNT-TC-A1-2006 DYE PENETRANT INSPECTION
- ASNT-TC-A1-2006 MAGNETIC PARTICLLE INSPECTION
- ULTRASONIC TEST
- RADIOGRAPHIC TEST
Disclaimer
I hereby certify that all information stated above are true and correct to the best of my knowledge and belief.
Timeline
QA/QC Welding Inspector
RED ROCK ENGINEERING LTD.
07.2023 - Current
WELDING INSPECTOR
DAEAH E & C
03.2021 - 07.2023
WELDING INSPECTOR
DAEAH E & C
03.2018 - 11.2019
QA/QC Welding/Piping Inspector
HYUNDAI ENGINEERING & CONSTRUCTION
12.2016 - 03.2018
QA/QC Welding Inspector
Samsung Engineering Saudi Arabia
11.2010
QA/QC Structural/Welding Inspector
Samsung Saudi Arabia
01.2008 - 11.2010
Welder Gtaw / Smaw
Daewoo E&C
06.2003 - 02.2004
QA/QC Welding Inspector
Samsung Engineering Saudi Arabia
Bachelor of Science in Mechanical Engineering, Don Andress Soriano National High School, CIT UNIVERSITY CEBU 1991-1992 (UNDERGRAD) Proceed to ETEEAP @ USJR online Class.
Similar Profiles
Justin HigginsJustin Higgins
Roof Plumber/supervisor at Red Rock EngineeringRoof Plumber/supervisor at Red Rock Engineering
Xuejie LiXuejie Li
Deputy CFO at Red Rock Renewables LimitedDeputy CFO at Red Rock Renewables Limited
Brian JacksonBrian Jackson
Back Server at T-Bones Chophouse- Red Rock Resort and CasinoBack Server at T-Bones Chophouse- Red Rock Resort and Casino