DAVID NJAMIO
Rigger
MIDVALE,WA
Summary
Hardworking organized and dependable rigging professional working to maintain tight deadlines. Safely working at heights and managing safety concerns. Familiar with winches, chain blocks, level blocks counterweights, Competent in dogging 650 tonne crawler cranes, 250,145,110,100,80 tonne slewing cranes and non slewing cranes. Clean driving record with multi combination truck license.
Overview
8
8
years of professional experience
1
1
Certification
Work History
Intermediate Rigger
BHP SITE CPB CONTRACTORS
2022.10 - 2023.12
- Improved lifting efficiency with the correct selection and usage of slings, shackles, and other rigging equipment.
- Ensured accurate load calculations for safe lifting operations, reducing potential hazards onsite.
- Contributed to project completion on time by effectively collaborating with crane operators and other team members.
- Performed rigging tasks in compliance with industry standards, maintaining a strong focus on safety regulations and protocols.
- Adhered to company's policy of no hands on load while lifting load by using magnetic poles/ pull and push sticks and tagline.
- Preparation of working at height paperwork ,signing relevant JHA ,workpack and swms before working on ewp platform or highrisk work allocated.
- Fine tuning crane operator to exact and precise location where steel, chute, cage, scaffolds stillage or any load to the required destination and safely landing it.
- Never lifting load over other workers and myself and ensuring im always in control and watching the load movement.
- Competent use of EWP GENIES, Haullotte, JLG over 11metres.
- Conducted regular safety briefings before each lift operation, emphasizing the importance of teamwork and communication among crew members.
- Assisted in training new team members on proper rigging techniques and procedures, promoting a culture of continuous learning within the organization.
- Built strong relationships with colleagues across diverse roles, fostering a collaborative environment that facilitated successful project execution consistently.
- Contributed to a culture of safety awareness by actively participating in safety meetings, tool-box talks, and other relevant training sessions.
- Worked at heights and in confined spaces without difficulty.
- Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
- Rigged cables and pipes in configurations to support loads and maintain crew safety.
- Rigged for heavy lifts according to blueprint requirements.
- Prepared and erected steel, torque and bolt-up connections.
- Prepared steel components for assembled bent sections and connectors.
- Assembled and installed rigging and lifting equipment to support lifting operations.
- Anchored pieces to fixed structures with bolts and clamps.
- Operated cranes, hoists and winches to lift, position and place heavy objects.
- loading and unloading ewp baskets on trailers beds.
- Assembly and demobbing crib rooms, toilets and lifting concrete blocks .
Intermediate Rigger
Rio Tinto Cape Lambert (Monadelphous Contractor)
2022.01 - 2022.09
- Increased workplace safety by performing thorough rigging inspections and ensuring proper maintenance of equipment.
- Stepping up as leading hand and ensuring proper installation and alignment of liners and maintaining proper gap as per workpack guidelines.
- General site inspection of chute, horse down of material build up, changing of training plates on screens.
- Changing of chutes on reclaimer and replacing with new ones.
- Working with other work crew and helping them lift heavy items to different levels of the plant.
- Use of forklift to lift heavy materials on site.
- safely operating ewp for steel election ,bolt tensioning and installing beams at height.
- Changing of boggie wheels on a reclaimer and installing with new set of wheels as well as working with mechanical fitters for fine tuning.
- Performed rigging tasks in compliance with industry standards, maintaining a strong focus on safety regulations and protocols.
- Optimized equipment utilization by promptly identifying required repairs or replacements for damaged components or gear items.
- Reduced downtime due to unforeseen issues by proactively addressing potential problems through routine checks and preventive maintenance activities.
- Safely executed complex lifting operations under challenging conditions such as extreme weather or confined spaces while adhering to established safety guidelines strictly.
- Contributed to a culture of safety awareness by actively participating in safety meetings, tool-box talks, and other relevant training sessions.
- Prepared and erected steel, torque and bolt-up connections.
Intermediate Rigger
North Star Group (Civmec Contractors) Iron Bridge
2021.05 - 2021.12
- Contributed to project completion on time by effectively collaborating with crane operators and other team members.
- Installing of Grind mesh ,handrails on deferent levels.
- Reading of plans and installing of modules and platforms on site.
- Dualifting modules and installing according to plan and ensuring primary crane has all the weight at all times and following dual lift study one movement at a time.
- Installation of bags and mesh in chambers dust collector systems.
- Competent in bolt part time marking, identification of the right structural bolts according to plan, X marking on handrails.
- Double checking for errors before Handing over completed tasks to supervisor for project tick off.
- Attending prestart meeting and participating and siting new improvements that would help the job completion .
- Enhanced job site productivity through timely identification and resolution of rigging-related issues.
- Implemented best practices for load control measures, ensuring stability during crane lifts and minimizing risks associated with heavy load movements.
- Safely executed complex lifting operations under challenging conditions such as extreme weather or confined spaces while adhering to established safety guidelines strictly.
Intermediate Rigger
North Star Group (GRESS Engineering) Thunder Box
2020.02 - 2021.05
- Increased workplace safety by performing thorough rigging inspections and ensuring proper maintenance of equipment.
- Improved lifting efficiency with the correct selection and usage of slings, shackles, and other rigging equipment.
- Correct identification of coloured tags to ensure they follow monthly inspection colour code.
- Prepared and erected steel, torque and bolt-up connections.
- Prepared steel components for assembled bent sections and connectors.
- Assembled and installed rigging and lifting equipment to support lifting operations.
- Helped assemble and build largest stockpile cover in the pilbara hemisphere.
- Dogging of 350 tonne crawler ,250,145,100,80 tonne slewers cranes including franna
- Reading plans and building of take up towers.
- Grouting and installing of steel on concrete foundations and working with surveyors to identify the height of packers while electing steel beams.
Tower Crane Rigger
Hanssen Consulting
2020.01 - 2020.04
- Enhanced job site safety by conducting regular inspections and maintenance on rigging equipment.
- Increased efficiency in crane operations by effectively communicating with crane operators and ground personnel.
- Ensured precise load placement by accurately calculating load weights and determining proper rigging configurations.
- Minimized project delays by promptly identifying and addressing any rigging issues or malfunctions.
- Installing of tilt concrete panel.
- dogging tower crane
- positive communication with crane operator and rigger
- Staying outside line of fire when lifting and alerting other work crews.
- Building ,lifting and installing formwork platforms to help masonry build concrete walls on different levels.
- Unloading of concrete panels,steel and other building materials from trucks safely using a tower crane.
- Unloading of trucks using a forklift.
- Maximized team productivity by providing comprehensive training to new crew members on safe rigging practices.
- Collaborated closely with project managers and engineers for accurate determination of job specifications and requirements.
- Reduced workplace accidents with diligent adherence to OSHA guidelines, national standards, and company policies.
- Consistently met project deadlines by working efficiently under pressure and adjusting to changing priorities as needed.
- Maintained a clean work area, contributing to both safety standards and overall professionalism of the job site.
- Performed pre-lift meetings with all involved parties to promote clear communication and understanding of roles and responsibilities throughout the lift process.
- Mastered various knots and hitches when securing loads for transport or aerial delivery, optimizing stability and safety of the items being moved.
- Demonstrated flexibility in adapting to diverse work environments including commercial construction projects, industrial settings, or marine operations where specialized rigging expertise was required for successful outcomes.
- Helped set up and rig up crane.
- Reported defects on equipment or rigging to proper supervisor.
- Used hand signals, verbal communication and radio to reduce risks in coordinating crane movements.
Truck Driver
BP Castrol
2015.08 - 2019.12
- Improved on-time delivery rates by effectively planning and executing efficient driving routes.
- Enhanced customer satisfaction by maintaining open communication with clients during pickups and deliveries.
- Reduced fuel expenses through careful route planning and diligent monitoring of vehicle maintenance needs.
- Increased safety standards by conducting thorough pre-and post-trip inspections of the truck and trailer.
- Provided timely, accurate documentation for all freight shipments, contributing to smooth logistical operations.
- Maintained a clean driving record while adhering to company policies and federal regulations for transportation safety.
- Developed strong relationships with dispatchers, ensuring optimal job assignments based on skillset and geographical familiarity.
- Facilitated loading and unloading processes by working closely with warehouse personnel, minimizing wait times at docks.
- Safeguarded cargo integrity by regularly checking load securement during transport and promptly addressing any issues that arose.
- Achieved high levels of customer satisfaction through professional interaction with clients at pickup and delivery points, representing the company positively at all times.
Education
MBA - Business Administration And Management
John Curtin College Bentley
Perth, WA10.2017
Skills
- Physical Strength and Stamina
- Fall Protection Systems
- Basic First Aid Knowledge
- Attention to Detail
- Lifting Gear Inspection
- Signal Communication Mastery
- Safety Equipment Knowledge
- Load Balancing Techniques
- Slings and Shackles Usage
- Safety Understanding
- Materials Movement
- Load Calculation
Accomplishments
- Supervised team of 6 staff members.
- Finished bag house installation of bags and mesh 16000 in chambers.
- Construction of take up tower.
- Installation of GTU and accurate measuring of counter weight to support the belt.
- Commissioning of PDP1 project at BHP port headland building of new reclaimer, conveyor belt pulleys,chutes ,transfer station and take up towers.
Certification
Multi-combination truck license
EWP over 11 metres
Forklift license
Dogging
Basic rigging
Intermediate rigging
First attack fire training
First aid training
Working at height training
Gas testing
Working in confined space.
load Restrain
soccer, swimming, gym workouts.
play soccer for fitness when on break and a way of socialising with friends
swimming when i get a chance its therapeutic.
choose gym fitness as a way of health living
REFERENCE
1 .STEVEN COOPER
Rigging supervisor
CPB contractors
0410907332
2.CHRIS MARWOOD
Mechanical supervisor
CPB contractors
0408200866
Timeline
Intermediate Rigger
BHP SITE CPB CONTRACTORS
2022.10 - 2023.12
Intermediate Rigger
Rio Tinto Cape Lambert (Monadelphous Contractor)
2022.01 - 2022.09
Intermediate Rigger
North Star Group (Civmec Contractors) Iron Bridge
2021.05 - 2021.12
Intermediate Rigger
North Star Group (GRESS Engineering) Thunder Box
2020.02 - 2021.05
Tower Crane Rigger
Hanssen Consulting
2020.01 - 2020.04
Truck Driver
BP Castrol
2015.08 - 2019.12
MBA - Business Administration And Management
John Curtin College Bentley
Multi-combination truck license
EWP over 11 metres
Forklift license
Dogging
Basic rigging
Intermediate rigging
First attack fire training
First aid training
Working at height training
Gas testing
Working in confined space.
load Restrain
Similar Profiles
Benjamin MulcahyBenjamin Mulcahy
Earthworks Labourer at CPB ContractorsEarthworks Labourer at CPB Contractors
Kate JOLLYKate JOLLY
Possession Protection Officer/Protection Officer 4 at CPB Contractors PTY LTDPossession Protection Officer/Protection Officer 4 at CPB Contractors PTY LTD
Samuel AndrioffSamuel Andrioff
BHP Wind Fences at CPB ContractorsBHP Wind Fences at CPB Contractors