DIEGO J. CLARO
Meringandan West,Australia
Summary
Accomplished welder with extensive experience at Yoshimune Kogyo Co Ltd, skilled in SMAW, GMAW, and FCAW welding techniques. Proven ability to interpret blueprints and select materials effectively, ensuring high-quality outputs. Strong attention to detail and commitment to safety practices enhance project success and team collaboration. Enthusiastic boilermaker offering several years of experience interpreting work orders and applying information to project needs. Promoting safety in every task. Sharp and highly trained with desire to work within the field sector.
Overview
1
1
Certification
18
18
years of professional experience
Work History
Boilermaker
Cannon Trailers
Crows nest, Australia
09.2022 - Current
- Read and interpret the drawing plan.
- Determine and select the materials to use in the project.
- Lay out and cut the materials according to its size and length.
- Fit the materials according to the drawing plan.
- Ensure that fitted materials are in correct alignment and locations before welding.
- Welded fitted materials using GMAW process to achieve strong, reliable joints.
- Checked straightness after welding and performed line heating to maintain structural integrity.
- Lift heavy materials using forklift.
- Ensured quality output by conducting thorough inspections throughout project.
- Perform air-arc gouging on defective welding bead and re-weld.
- Manufactured cattle trailers to meet design specifications.
WELDER
RAKK SOO INCORPORATED
Olongapo City, Philippines
12.2019 - 07.2021
- Read and interpret drawing plan.
- Fabricate and fit metal components according to the drawing plan.
- Perform Lay out and mould line marking.
- Perform leveling of the metal components to be fit and aligned accordingly.
- Cut, measure, fit, fabricate and weld building construction metal components.
- Perform an all-welding position on butt joints and fillet welds on fitted materials.
- Perform gas cutting, speed cutting and mechanical cutting of the materials to use on building construction projects.
- Perform safety erection procedure of the fabricated materials on building construction Projects.
- Perform set up on welding machines and trouble shoots basic machine troubles.
- Perform an Air Arc Gouging repair on defected welding bead and re-weld.
- Perform visual inspection of welding bead after welding and repair any defects found.
- Ensured quality output on various building construction projects.
- Cleaned and replaced gas cutting torch tips and speed cutter blades, ensuring optimal cutting performance.
- Removed rust from materials using grinding equipment to prepare for fabrication.
- Ensured adherence to safety practices by consistently wearing appropriate safety gear on job sites.
- Cleaned and turned off electrical equipment after work tasks to maintain a safe and organized job site.
- Building Construction Company
FCAW/SMAW/GMAW WELDER
YOSHIMUNE KOGYO CO LTD.
ONOMICHI CITY, Japan
02.2016 - 02.2019
- WELDER AND FABRICATOR
- Read and interpret Drawing plan.
- Cut and measure steel according to the drawing plan.
- Perform Lay out and mould line markings.
- Perform Bevelling of buttjoint according to the drawing plan.
- Perform rust removal of material to use with the use of grinding equipment.
- Grinded free edges based on the drawing plan.
- Perform gas cutting and wheel cutting of materials to be use.
- Clean and replace damaged gas cutting torch parts.
- Fabricate and fit metal components according to the drawing plan.
- Welded fabricated and fitted materials according to WPS (Welding Procedure Specifications) to ensure structural integrity.
- Perform welding on all positions of buttjoints and fillet welds on fitted materials.
- Conducted visual inspections of welding beads post-welding to assess quality and compliance with standards.
- Perform welding repair on welding defects after welding.
- Perform cleaning of the welding bead by chipping gun and grinder.
- Perform heating of base material before welding up to 250 degrees fahrenheit.
- Perform basic trouble shooting on welding machine.
- Perform set up of welding machine.
- Perform robotic welding on long span fillet weld on frames and girders of the ship.
- Perform Air Arc gouging repair on welding bead defects.
- Perform welding on fillet weld of 1F, 2F, 3F and 4F. in accordance with the WPS (WELDING PROCEDURE SPECIFICATION).
- Perform welding on buttjoints of 1G, 2G, 3G and 4G IN ACCORDANCE WITH THE WPS (WELDING PROCEDURE SPECIFICATION).
- Perform safety practice at work at all times and using full safety gears.
- Perform cleaning of working area after the work done and switch off electrical equipment before leaving the area.
- Contributed to shipbuilding projects by executing welding tasks and collaborating with the team.
FCAW WELDER
SITIKOR CORP
Subic Bay Freeport Zone, Philippines
09.2011 - 09.2015
- Read and interpret drawing plan.
- Measure and cut steel according to drawing plan.
- Perform Lay out and mould line marking.
- Perform beveling of but joint according to the drawing plan.
- Perform Gas cutting and wheel cutting of the materials to be use.
- Clean and replaced cutting torch tip and cutting wheel to use in cutting process.
- Remove rust on the materials to use with the use of cup brush and grinding equipment.
- Grind free edges base on the drawing plan as per PSPC (PROCEDURE STANDARD FOR PROTECTIVE COATING) standard.
- Fabricate and fit metal component according to the drawing plan.
- Perform set up and trouble shooting on the welding machine.
- Perform Welding on fabricated and fitted metal component of the ship.
- Perform visual inspection on welding bead after welding to determine the quality of the welding output.
- Perform robotic welding on long span fillet weld on girders and frames.
- Perform welding repair on the welding defects after welding.
- Cleaning of the welding bead by chipping and grinding after welding.
- Perform Air Ac Gouging on welding repair and re weld after.
- Perform all positions of fillet welds,1f, 2f,3f and 4f.
- Perform all positions of Groove welds like the 1G,2G,3G and 4G. in accordance with the WPS (WELDING PROCEDURE SPECIFICATIONS).
- Perform Safety practice on the working site and keep the the working area clean and tidy.
- Switch off electrical equipment before leaving the area.
- SHIPBUILDING
FCAW Welder
REDO-I TECH CORPORATION
Subic bay, Philippines
11.2008 - 09.2011
- Perform welding on fabricated and fitted ship material with the use of FCAW welding process in accordance with the WPS (Welding Procedure Specifications).
- Perform visual inspection on the welding bead after welding to determine the quality of the welding bead and repair any defects.
- Perform edge grinding of the free edges base on the drawing plan as per PSPC (PROCEDURE STANDARD FOR PROTECTIVE COATING) standard.
- Perform welding on hull seam lines and air tight frames and girders.
- Perform welding on the primary and secondary ship components like the girders, frames, hull shell, trans bulk head, collar plates, brackets, air tight doors, belge well, handrails and bollards.
- Perform robotic welding on long span fillet welds on girders, frames and stiffeners.
- Perform safety practice on the working area at all times.
- Clean and keep the working area in order at all times.
- SHIPBUILDING
Education
Bachelor of Science - Mechanical Engineering
Capitol University
Cagayan De Oro City03-2003
High school or equivalent -
Tagoloan National High School
Tagoloan, Misamis Oriental, Philippines03-1999
Skills
- Welding techniques
- Blueprint interpretation
- SMAW GMAW FCAW WELDING
- Material selection
- Air-arc gouging
- Equipment maintenance
Certification
- Gas Metal Arc Welding (GMAW) NC2 Welding, Technical Education Skills and Development Authority, Diversified Corporation, No. 826 Fabela Street Plainview Subdivision, Mandaluyong City, 1550, 10/14/19, 11/23/19, 268
- Gas Tungsten Arc Welding (GTAW) NC2 Welding, Technical Education Skills and Development Authority, No. 826 Fabela Street Plainview Subdivision, Mandaluyong City, 1550, 08/31/19, 10/09/19, 268
- Welding Qualification for Foreigner, Japan Welding Engineering Society, 11/20/18
- Shielded Metal Arc Welding (SMAW) NC2 Welding, Technical Education Skills and Development Authority, Technical Education Skills and Development Authority Training Center, Castillejos, Zambales, Philippines, 07/01/13, 11/15/13, 316
- CERTIFICATE 111 in Engineering - Fabrication trade , Australian Construction Training Services
Birth Date
11/26/81
Height
5'5"
Weight
72 kgs.
References
- Mr. Dan Cannon, Foreman, Cannon Trailer, 17th Timber Street, Crowsnest, QLD, 4355, 0429572498
- Mr. Ryan A. Padero, Leadman, SITIKOR Corporation & REDO-I TECH CORP., Purok 9 Balaybay, Castillejos, Zambales, Philippines, 09668237851, ryanpadero22@gmail.com
Languages
- English
- Tagalog
- Cebuano
- Japanese
Birthplace
Santa Cruz, Tagoloan, Misamis Oriental, Philippines
Personal Information
- Passport Number: P8040200A
- Passport Expiry Date: 07/22/28
- Citizenship: Filipino
- Date of Birth: 11/26/81
- Marital Status: Married
- Religion: Roman Catholic
Timeline
Boilermaker
Cannon Trailers
09.2022 - Current
WELDER
RAKK SOO INCORPORATED
12.2019 - 07.2021
FCAW/SMAW/GMAW WELDER
YOSHIMUNE KOGYO CO LTD.
02.2016 - 02.2019
FCAW WELDER
SITIKOR CORP
09.2011 - 09.2015
FCAW Welder
REDO-I TECH CORPORATION
11.2008 - 09.2011
Bachelor of Science - Mechanical Engineering
Capitol University
High school or equivalent -
Tagoloan National High School