Hajatullah Anvari
Geelong ,VIC
Overview
10
10
years of professional experience
Work History
House Painter
Esmat
Geelong , Vic
01.2014 - 01.2024
- Stained woodwork including cabinets, doors and furniture pieces upon request.
- Used sandpaper to scrape walls and other surfaces to remove old paint.
- Performed series of surface preparation techniques to maximize paint durability.
- Maintained thorough inventory of paint equipment and supplies by checking product levels.
- Filled cracks, holes or joints using caulking guns or putty knives.
- Removed fixtures such as door knobs, light switch covers, window sashes and hardware prior to painting.
- Sanded down existing finishes that were peeling or cracked before repainting them.
- Completed high-volume weekly painting jobs with consistently positive customer feedback.
- Spread undercoats and finish materials using rollers and spray equipment.
- Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
- Calculated cost and quantities of required materials based on surface measurements or work orders.
- Calculated amounts of required materials and approximate time to complete each project to estimate project costs.
- Protected floors and furniture from paint spills using drop cloths.
- Met with clients to discuss color and finish options and other design details.
- Selected and purchased tools or finishes for surfaces to be covered.
- Operated airless spray equipment and motorized lifts.
- Cleaned and properly stored paint equipment and supplies at end of each workday.
- Smoothed and finished surfaces on walls, trim and cabinetry.
- Measured wall area accurately to determine amount of material needed for each project.
- Cleaned and smoothed surfaces prior to painting.
- Repaired drywall defects prior to painting by patching holes or sanding rough spots.
- Applied primers or sealers to prepare bare wood or metal for finish coats.
- Covered surfaces and furnishings with cloth and plastic to protect from paint drops.
- Used putty knives and caulking guns to fill cracks, holes and joints with plaster, putty and caulk.
- Sanded, stripped, brushed and power washed surfaces to clean and smooth, ensuring adherence of paint and primer.
- Sprayed prepared surfaces with specified amounts of primers and finish coatings.
- Removed fixtures and electric switch covers prior to painting.
- Provided work order cost estimates based on anticipated type and quantity of materials needed and total project surface area.
- Selected appropriate materials such as primers, paints, thinners, varnishes and stains in accordance with job requirements.
- Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
- Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
- Mixed paints and solutions and monitored consistencies.
- Inspected areas for needed repairs before applying primer or final coat of paint.
- Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
- Removed pictures, door knobs or electric switch covers prior to painting.
- Prepared surfaces for painting by filling cracks, holes and other imperfections with caulk or putty.
- Applied paints, sealers and solvents to plaster, sheetrock, concrete and wood.
- Used power and hand tools safely and effectively.
- Calculated amounts of materials and estimated cost based on surface measurements or work orders.
- Performed repairs to defects in walls by patching holes and scrapes prior at project start.
- Mixed paint according to manufacturer's specifications and applied coats of paint using brushes, rollers, and spray guns.
- Applied paint, stain and varnish to wood, metal, plastic and drywall both inside and outside of residential dwellings using sprayers, brushes and rollers.
- Mixed and applied paints, varnishes and sealants to promote lasting finish.
- Performed minor plaster repair, blending newly renovated wall surfaces with existing plaster.
- Primed and sealed unfinished wood, plastic and metal surfaces to prepare for additional coats of paint and other finishing substances.
- Selected, mixed and applied surface coatings to match and restore interior or exterior surfaces.
- Used brushes, spray guns and paint rollers to paint exterior surfaces.
- Provided estimates on labor costs based on customer requests.
- Applied primers or sealers to prepare new surfaces for finish coats.
- Chose correct brushes and materials for jobs and purchased from vendors.
- Received work orders from supervisors and clients to determine scope of work, materials needed and other job requirements.
- Calculated the amounts of materials required to complete each job accurately.
- Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
- Smoothed surfaces using sandpaper, scrapers or sanding machines.
- Vacuumed up dust after sanding surfaces prior to painting them.
- Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
- Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
- Applied sealants to protect painted surfaces from weathering elements.
- Completed day-to-day duties accurately and efficiently.
- Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
- Assisted with customer requests and answered questions to improve satisfaction.
- Planned and completed group projects, working smoothly with others.
- Recognized by management for providing exceptional customer service.
Education
Diploma - Panel Beater
Haukiputaan Ammattikoulu
Haukipudas01-2010
Skills
- Paint Mixing
- Color Matching
Timeline
House Painter
Esmat
01.2014 - 01.2024
Diploma - Panel Beater
Haukiputaan Ammattikoulu