Heungjoo Son (Jayden)
Carlingford,NSW
Overview
21
21
years of professional experience
Work History
Welder
Monadelphous
Singleton, NSW
07.2023 - 08.2023
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Welded metal components in vertical, overhead and flat positions.
- Welded various connections with high-quality final results.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
Pipefitter Welper
DME
Smithfield, NSW
04.2023 - 07.2023
- Followed safe work practices, which included fall protection and personal protective equipment.
- Measured, cut, threaded and assembled new pipe to place assembled pipe in hangers or other supports.
- Tested piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
- Set sleeves or inserts to provide support for pipes.
- Installed valves, hangers, supports, and flanges inside piping systems.
- Measured, cut and assembled new pipe and placed assembled pipe in hangers or other supports.
- Selected type and size of piping required for each project.
Welder
Monadelphous
Singleton, NSW
01.2023 - 03.2023
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Prepared welding equipment to perform advanced welding work.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Welded metal components in vertical, overhead and flat positions.
- Welded various connections with high-quality final results.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
Pipefitter
Primero
WA
11.2022 - 12.2022
- Followed safe work practices, which included fall protection and personal protective equipment.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Cut and drilled holes in walls to permit passage of pipes.
- Assisted with repairs to steam, drainage, and sewer lines.
Gold Mining Project Pipe Fitter
Construction Links
Canberra, ACT
08.2022 - 10.2022
- Followed safe work practices, which included fall protection and personal protective equipment.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Cut and drilled holes in walls to permit passage of pipes.
Wleder
John Holland Group
Sydney Air Port
01.2022 - 07.2022
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Welded various connections with high-quality final results.
Pipe Fitter, Welder
John Holland Group
Sydney Football Stadium
05.2021 - 12.2021
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Inspected and tested existing pipe systems to identify system defects and malfunctions.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Prepared welding equipment to perform advanced welding work.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
Welder
Monadelphous
Nsw
12.2020 - 03.2021
- Inspected welds and checked critical measurements to meet specifications.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Welded metal components in vertical, overhead and flat positions.
Boiler Maker, Pipe Fitter
Construction Links
Whyalla, SA
01.2020 - 08.2020
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
Ammonia Plant Project Pipe Fitter
Kobalt
Karratha
09.2019 - 10.2019
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Planned pipe system layout, installation and repair according to specifications.
Pipe Fitter
Tetris
Emu Plains, NSW
01.2019 - 08.2019
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Fabricated piping pieces and components in line with design specifications for each system.
Pipe Fitter
Construction Links
Muswellbrook, NSW
08.2018 - 12.2018
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Cut and drilled holes in walls to permit passage of pipes.
Welder
Programmed
Nsw
06.2015 - 11.2016
- Welded in flat, horizontal, vertical, and overhead positions.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Welded various connections with high-quality final results.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
Boiler Maker, Pipe Fitter, Welder
Queensland Steel Product
Rockhampton, QLD
10.2013 - 05.2015
- Welded in flat, horizontal, vertical, and overhead positions.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Threaded pipes using piping machines.
- Prepared welding equipment to perform advanced welding work.
- Replaced faulty parts and repaired structural damages to pipes and related components.
- Chipped off excess weld, slag, and spatter using hand tools.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
Pipe Fitter, Welder
Neapean Engineering
Narellan, NSW
06.2013 - 05.2015
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Prepared welding equipment to perform advanced welding work.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
Welder
Samsung Heavy Industries
South Korea
03.2005 - 11.2010
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Welded various connections with high-quality final results.
Welder Helper
Samsung Heavy Industries
South Korea
03.2002 - 04.2003
- Welded in flat, horizontal, vertical, and overhead positions.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Prepared welding equipment to perform advanced welding work.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
Education
Busan National University
BusanBusan Welding Academy
Busan2002
Skills
- Operate Forklift
- Portable Grinders
- Hand Saw
- Punch Presses
- Sheet Metal Fabrication
- Pipefitting
- Tool Repair and Maintenance
- Structural Welding
- Crane and Hoist Equipment Operation
- Power Saws
- Welding Techniques
- Parts Fabrication
- Flux Core (FCAW) Welding
- Pipe Welding
Timeline
Welder
Monadelphous
07.2023 - 08.2023
Pipefitter Welper
DME
04.2023 - 07.2023
Welder
Monadelphous
01.2023 - 03.2023
Pipefitter
Primero
11.2022 - 12.2022
Gold Mining Project Pipe Fitter
Construction Links
08.2022 - 10.2022
Wleder
John Holland Group
01.2022 - 07.2022
Pipe Fitter, Welder
John Holland Group
05.2021 - 12.2021
Welder
Monadelphous
12.2020 - 03.2021
Boiler Maker, Pipe Fitter
Construction Links
01.2020 - 08.2020
Ammonia Plant Project Pipe Fitter
Kobalt
09.2019 - 10.2019
Pipe Fitter
Tetris
01.2019 - 08.2019
Pipe Fitter
Construction Links
08.2018 - 12.2018
Welder
Programmed
06.2015 - 11.2016
Boiler Maker, Pipe Fitter, Welder
Queensland Steel Product
10.2013 - 05.2015
Pipe Fitter, Welder
Neapean Engineering
06.2013 - 05.2015
Welder
Samsung Heavy Industries
03.2005 - 11.2010
Welder Helper
Samsung Heavy Industries
03.2002 - 04.2003
Busan National University
Busan Welding Academy