Ivan Katusa

• Working with concrete mix carying bricks around the site
• Mixed, applied, and smoothed mortar onto work surfaces to achieve coverage and good bonding
• Worked with clamps and anchoring attachments to fasten brick facades to building structures for safety and durability.

• Performed general housekeeping and cleaning tasks.
• Loaded and unloaded materials onto trucks and trailers.
• Cleaned and maintained tools, equipment and worksites.
• Assisted in digging, trenching and backfilling trenches and foundations.
• Grinding And Cutting Steel
• Dug trenches, backfilled holes and compacted earth to prepare for new construction.
• Helped with erecting scaffolding and ladders.
• Loaded, unloaded, and moved material to and from storage and production areas.
• Improved worksite efficiency by maintaining clean and organized work areas.
• Used variety of hand and power tools to complete tasks.
• Followed instructions and safety protocols to prevent accidents and injuries.
• Loaded and unloaded materials and equipment onto and off construction sites.
• Managed safe and efficient use of tools and equipment on construction sites.
• Pressure Gun Cleaning
• Using Brick's And Blocks Cutting Machine
• Working With Water Pump's,,(Dewatering)
• Concrete Pour Finishing Touches
• Exclusions Zone's Setup

-Under ground Pipes Install

-spotting for Machinery Operations

-Cleaning the Site

-Working With D.P.U Unit

-Fence Paneling

-Steel Cutting

-

• Worked alongside team to accomplish work goals according to schedule.
• Understood and followed verbal and written instructions to complete work correctly.
• Dug trenches, ditches and holes to allow for utility, water and sewer installation and proper foundation for structures.
• Assisted in digging, trenching and backfilling trenches and foundations.
• Mixed and poured concrete for variety of projects.

• Dug trenches and set up forms to specified requirements for concrete pours.
• Mixed and poured concrete for variety of projects.
• Assisted in digging, trenching and backfilling trenches and foundations
• Dug trenches, backfilled holes and compacted earth to prepare for new construction
• Fixing Road Defects Around the Site
• Drilling Concrete
• Environmental Controls
• Installing Bridge Handrails and Medium Barriers
• Operating DPU Unit For Compaction
• Spread asphalt, gravel and other materials at work locations using variety of tools and equipment.
• Clear areas in preparation for laying down asphalt.
• Used variety of hand and power tools to complete tasks.
• Spotting For Machinery on Site
• Steel Cutting
• Grinding
• Manual trench Digging
• Eco Drain Install
• Sanding Concrete Barriers
• Using HB-70 and FC Render
• Fence Panels Setup And Removals on the Site
• Installing noise reduction panels
• Storm water Pipes Install
• Pressure Gun Cleaning
• Delineating Around Deep Excavations Area's

• Used power tools on the job, including drills and saws
• Drilled holes in walls, dug trenches, and broke up concrete to prepare structures for installation
• Performed work independently without direct supervision
• Cleaned and maintained the worksite and complied with applicable safety regulations
• Lifted, positioned, and secured materials and components required
• Set up and broke down temporary structures such as scaffolding, barricades, and hoists
• Used hand and power tools such as shovels, drills and air hammers to break up existing materials, dig trenches and drill holes
• Drilled holes and threaded wires and cables through ducts or conduits using hand and power tools
• Finished building grounds by assisting with landscaping and pouring concrete or spreading asphalt
• Cleaned, coated and sealed surfaces to complete construction jobs
• Insulation install and Removal cleaning the site
• I
• Flagging the Area building demolition
• References: Mark Candles

• Coordinated traffic around work areas for team safety and to protect general public
• Set up simple and complex ladder systems and scaffolds to help workers reach work locations
• Completed tasks wearing respirators or other personal protective equipment to defend against hazardous conditions and dangerous elements
• Prepared site by putting up rails and safety screens, laying dust sheets, and separating re-usable building materials after demolition
• Utilized specialist equipment to safely remove hazardous materials, including asbestos and toxic chemicals
• Stripped out fittings, removed doors and windows, and dismantled roof structures to prepare for demolition
• Complete building demolition
• References:Rami

• Set up simple and complex ladder systems and scaffolds to help workers reach work locations
• Followed instruction for assigned tasks from foreperson and lead teams in performing new phases of the work
• Ensured proper operation of tools and equipment at the site following safety requirements
• Concrete patching cleaning the building site cutting the steel mesh
• Digging flagging the building area using power tools
• References:Mick peters

• Used grinders, sanders, and polishing compounds to achieve desired finishes on different surfaces
• Finished building grounds by assisting with landscaping and pouring concrete or spreading asphalt
• Cleaned construction sites to prepare for new installations
• Followed established guidelines and procedures
• Completed assigned tasks with little or no supervision
• Communicate with site supervisors and team members to complete project objectives on schedule
• Trench digging
• Fence installation and removal underground water pipe installation
• Concrete patching picking pieces of steel with magnet
• Built forms for concrete pour and assisted carpenters with rough carpentry tasks
• Cleaned construction sites to prepare for new installations
• Rocks removal under the bridge flagging the area
• Road signs installation
• Ground compaction using Trench rammer
• Road lane markings
• Ensured proper operation of tools and equipment at the site following safety requirements
• References:Greg

• Used edging tools and jointers to mold expansion edges and joints
• Spread, leveled, and smoothed concrete using rakes, shovels, and power trowels
• Monitored the weather to predict its impact on the concrete curing process
• Created the necessary smooth or rough finish with tools such as trowels and brooms
• Repaired damaged concrete by cutting out the problem areas and inserting reinforcing rods
• Compacted concrete with use of power vibrator.