Summary
Overview
Work History
Education
Skills
Certification
References
Timeline
Generic

Jake Goldsworthy

Mandurah,WA

Summary

My objective is to further develop my skills and knowledge in the electrical industry and to instill better practices and procedures. I'm very proud of the Industry I have chosen to be a part of and I'm very eager to adapt alongside the new advancements and technologies that are rapidly emerging. Hardworking Industrial Electrician with over 11 years of experience in the industry. Skilled at electrical and fixture installations. Sound knowledge of electrical tools and equipment. Productive Industrial Electrician with comprehensive experience installing, maintaining and repairing electrical equipment. Adept at carrying out preventive maintenance on machinery and circuits.

Overview

5
5
years of professional experience
1
1
Certification

Work History

Industrial Electrician

Mineral Resources
  • Installed, maintained and repaired electrical wiring, controls and lighting systems.
  • Installation of Electrical Enclosures and Cable supports/
  • Termination of Motors and Pumps
  • Collaborated with engineers and other technicians for the successful completion of various industrial projects.
  • Performed thorough testing on newly-installed electrical systems to confirm proper function before integrating into daily operations.
  • Repaired and replaced equipment, electrical wiring and fixtures.
  • Connected wires to circuit breakers, transformers, and other components.

High Voltage Tech

Pacific Energy
  • Provide Test Reports for HV and MV switchgear 11kv - 66kv RMUs/Transformers/Protection and Metering Voltage transformer and Current Transformers
  • Primary and secondary Injection testing with SEL relays.
  • Use of Megger TRAX 280/ Megger CT/VT analyser/ High Pot testing/ Megger Ductor Tester/ 10Kv IR Tester.
  • Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
  • Trained new technicians on standard operating procedures, ensuring consistency across the team.
  • Supporting handover inspections for corrective and capital works ensuring that assets have been installed and operating in line with Australian standards.
  • Reviewing operating performance of secondary systems to ensure that devices and schemes are operating according to design requirements and scheme intent.
  • Assisting with review and updating of secondary systems design ma

Underground High Voltage Electrician

Hahn
  • Contributed to project success by providing valuable input during planning stages, offering solutions based on expertise and experience.
  • Improved system performance by upgrading outdated equipment and implementing new technologies in high voltage installations.
  • Increased client satisfaction through clear communication regarding project updates, challenges, and resolutions.
  • Participated in the installation of high voltage equipment including transformers, switchgear, and transmission lines ensuring optimal functionality upon completion.
  • Collaborated with team members to complete complex projects within deadlines, contributing to overall project success.
  • Conducted regular safety briefings for team members to raise awareness about potential risks associated with high voltage work while reinforcing safe practices.
  • Responded to emergencies and outages that required additional labor and assistance for repairs.Improved system performance by upgrading outdated equipment and implementing new technologies in high voltage installations.
  • Maintained detailed records of work performed, including repairs, upgrades, and safety measures for future reference.
  • Ensured workplace safety through adherence to industry regulations and strict safety protocols during all tasks.
  • Promoted environmental sustainability by identifying opportunities for energy efficiency improvements within high voltage systems.
  • Demonstrated strong communication skills when providing progress updates to supervisors or discussing project requirements with clients.
  • Continuously expanded technical knowledge through participation in industry conferences, workshops, and training programs.
  • Enhanced power grid reliability by performing routine maintenance and repairs on high voltage electrical equipment.

E&I Technician

Simpec
  • Installation/Termination of MCCs DBs Pu Panels with Power/Control/Instrumentation
  • Installed, maintained, repaired and tested equipment for electricity generation and utilization
  • Coordinated with other trades and general contractors to facilitate layout of plant fixtures and structural supports
  • Worked with various types of cable ladder, steel conduits and including fixings
  • Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts
  • Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
  • Collaborated with engineering teams to develop effective solutions for complex technical problems in industrial settings.
  • Conducted comprehensive testing procedures using multimeters, oscilloscopes, calibrators, and other diagnostic tools to verify proper functioning of E&I components.
  • Supported project completion by reading and interpreting schematics, wiring diagrams, technical manuals, and specifications to ensure accurate installations of E&I components.
  • Demonstrated strong problem-solving abilities by troubleshooting complex issues related to PLC programming, HMI interfaces, SCADA systems, and other industrial control systems.

Maintenance Electrician/Shut Down Electrician

Goldfields
  • My First role was to assist in the shutdown of Gruyere Gold processing plant checking and proving functionality for continued service, I was later asked to stay on to stay on to help preventative maintenance assisting the instrumentation and control of various apparatus from ultrasonic level sensors, temperature sensors, mag flow, density using Fluke Process meter 789 confirming loop circuits and isolated operation of butterfly valves.
  • Inspected electrical equipment to assure it was operating correctly.
  • Responded to fault and wiring issues, identifying hazards and problems.
  • Conducted preventive maintenance on equipment.
  • Installed new equipment and modified existing equipment.
  • Reduced downtime by promptly troubleshooting and repairing electrical issues in industrial machinery.
  • Collaborated closely with other maintenance professionals to coordinate repairs efficiently without disrupting daily operations.
  • Conducted periodic assessments of maintenance tools and equipment, ensuring they were in proper working order to maximize workplace efficiency.

E&I Technician

SCEE
  • Collaborated with engineering teams to develop effective solutions for complex technical problems in industrial settings.
  • Supported project completion by reading and interpreting schematics, wiring diagrams, technical manuals, and specifications to ensure accurate installations of E&I components.
  • Demonstrated strong problem-solving abilities by troubleshooting complex issues related to PLC programming, HMI interfaces, SCADA systems, and other industrial control systems.
  • Coordinated with vendors to source high-quality replacement parts and equipment, ensuring timely repairs and reducing lead times for critical components.
  • Contributed to seamless startup operations by assisting in the commissioning of new equipment installations during facility expansions or upgrades.
  • Supported other technicians and engineers in assembly, disassembly, cleaning, testing and troubleshooting.
  • Supported the efficient operation of substations by conducting inspections and preventive maintenance on transformers, circuit breakers, and other high voltage components.
  • Assisted in the planning and execution of major electrical projects, ensuring timely completion and minimal disruption to services.

High Voltage Electrician

GCO SOLAR (SHELL/QGC)
  • High Voltage HVDC/HVAC, during my time with GCO solar I was part of the PCU electricians installing/Terminating HVDC 400mm² Cables and 33kv HVAC cables relocating and testing cables of problems using Megger Insulation testing, I also aided the completion of the battery bank for the substation as well as switching various HV breakers/Isolators, while I was at GCO I performed the duties of there HSR reporting and assisting in the rectification of problems that arise.
  • Improved system performance by upgrading outdated equipment and implementing new technologies in high voltage installations.
  • Participated in the installation of high voltage equipment including transformers, switchgear, and transmission lines ensuring optimal functionality upon completion.
  • Supported the efficient operation of substations by conducting inspections and preventive maintenance on transformers, circuit breakers, and other high voltage components.
  • Assisted in the planning and execution of major electrical projects, ensuring timely completion and minimal disruption to services.
  • Utilized advanced diagnostic tools such as thermal imaging cameras to identify potential issues early on leading to faster resolution times.
  • Reduced outage durations by efficiently diagnosing and troubleshooting issues in high voltage systems.

SF6 Tech

PowerLink
  • As an SF6 Technician I have gained a deeper appreciation of our hybrid switchgear technology that is in use worldwide
  • My role as our SF6 Technician, I would provide detail analysis of decomposition products that are contained within the sample to a NATA standard, this detailed report of results can help us to determine switch gear safe operation
  • Highlights: Secondary a SF6 reprocessing plant operator
  • I personally overcame to products Powerlink's first crate of in house made SF6, The Reprocessing plant in house at Powerlink came with its own trials and tribulations.
  • Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
  • Trained new technicians on standard operating procedures, ensuring consistency across the team.

SUBSTATION TECHNICIAN

POWERLINK QUEENSLAND
  • Working as a High Voltage Substation Electrician, my role consisted of a variety of tasks including High voltage switching allowing us access to work safely within a segregated area for install or refurbishment of new plant or existing high voltage apparatus
  • Maintenance on all our assets with in the high voltage transmission network from Feeders TXs, VTs CTs CBs Isolator SVCs Cap banks in voltages ranging 110KV to 330KV, in a variety of Substation across Queensland where DIDO and FIFO for extended periods was expected.
  • Supported emergency response efforts, quickly restoring power during outages and reducing inconvenience for customers.
  • Enhanced substation reliability by conducting routine inspections and maintenance tasks on electrical equipment.
  • Collaborated with engineers to design, install, and test new substation equipment, ensuring optimal performance.
  • Conducted comprehensive testing of high-voltage transformers, circuit breakers, and switchgear to ensure proper operation and minimize risks associated with equipment failure.

ELECTRICAL APPRENTICE

ELECTROGROUP QUEENSLAND
02.2013 - 09.2017
  • Over my time in the electrical Industry, I've been exposed to a variety of different projects
  • Below are a few noteworthy projects I've been proud to have worked on: Electrical Fitter Mechanic
  • In all aspects from Technical Drawings/ Compliance/Verification/Rectification/Installation
  • Bechtel GLNG LNG Gas Process, Curtis Island
  • FIFO 4:1 Roster, during my apprentice I was fortunate enough to make a start in the industrial industry, I gained 3 years' experience on a 2 Train LNG plant, I carried out installation of lighting circuits and apparatus
  • Extreme experience with HA Apparatus including SWA cable glands, switchboard/marshalling kiosks and control panels and cableway supports
  • I transferred to the Substation crew installing HV bus and Control equipment Testing and Verification for handovers
  • QGC Woolloobie Creek, Gas Pipe line/Leighton Charlie While working as a sub-contractor with DSE for QGC pipeline base at Woolloobie Creek

Education

ASSOCIATES DEGREE ELECTRICAL ENGINEERING -

UNIVERSITY OF SOUTHERN QUEENSLAND
06.2020

Skills

  • Electrical Troubleshooting
  • Industrial Wiring
  • Lockout and tagout procedures
  • Electrical schematics
  • Electrical Testing Equipment
  • Hazardous Location Wiring
  • Equipment Calibration
  • Grounding Systems
  • Instrumentation and controls
  • System Testing
  • Arc Flash Safety
  • Test equipment operation
  • Diagnostic Testing

Certification

  • CONFINED SPACES TRAINING (B.A)
  • GAS TEST ATMOSPHERES
  • CURRENT LVR/CPR
  • ASBESTOS AWARENESS TRAINED
  • WORKING SAFELY WITH ASBESTOS
  • MANUAL OPEN DRIVER'S LICENSE
  • CERTIFICATE II INFORMATION AND TECHNOLOGY
  • WORKING AT HEIGHTS
  • HRWL 3432083 WP LF
  • HIGH VOLTAGE SWITCHING OPERATOR
  • HIGH VOLTAGE SWITCHING
  • WA ELECTRICAL LICENSE EW204217
  • CERTIFICATE IV EEHA HARDOUS AREAS

References

  • PERSONAL, HOWARD WRIGHT, GENSRV, 0448 852 658
  • PERSONAL, THOMAS LERCHER 0458 534 635
  • PROFESSIONAL, MARTIN NOOYEN 0411 168 362
  • PROFESSIONAL, CAMERON HUMPHREYS, POWERLINK, 0407 913 509
  • PROFESSIONAL, ROSS LAMBERT, POWERLINK, 0428 457 505
  • PROFESSIONAL, TONY NGO, OIL LABOROTORY, POWERLINK, 0438 760 243

Timeline

ELECTRICAL APPRENTICE

ELECTROGROUP QUEENSLAND
02.2013 - 09.2017

Industrial Electrician

Mineral Resources

High Voltage Tech

Pacific Energy

Underground High Voltage Electrician

Hahn

E&I Technician

Simpec

Maintenance Electrician/Shut Down Electrician

Goldfields

E&I Technician

SCEE

High Voltage Electrician

GCO SOLAR (SHELL/QGC)

SF6 Tech

PowerLink

SUBSTATION TECHNICIAN

POWERLINK QUEENSLAND

ASSOCIATES DEGREE ELECTRICAL ENGINEERING -

UNIVERSITY OF SOUTHERN QUEENSLAND

Similar Profiles

CREATE PROFILE
Jake Goldsworthy