Jimmy Baroro

• Verified that all necessary joints were properly fitted before welding process began.
• Completed skilled welds on pressure-tested pipe in installations.
• Welded and worked with stainless steel and various alloys.
• Avoided errors by carefully reading blueprints and specifications to correctly lay out parts and plan welding processes.
• Welded fabrication materials, continuously checking for safety and quality.

• Executed fit up and welding of stainless steel jet fuel line pipes for underground pipeline, schedule 10, ranging from 6 inches to 10 inches, ensuring all welds met 100% NDT standards.
• Completed final tie-in weld joints in underground pipeline.
• Mobilized to New South Wales for two-month Bayswater Power Station shutdown, focusing on P22 16-inch pipe welding with 68 mm thickness, including battering and tempering procedures.

• Fabricated and assembled carbon steel pipes from 25 mm to 200 mm, schedule 40 to 80.
• Executed full welding of carbon steel pipes utilizing TIG and stick methods.

Executed full welding of chute and hopper leg column on screen house using inner shield and flux core.

Completed full welding of carbon steel pipes to ensure structural integrity.

• Full welding on the turbine, cutting and welding boiler tubes, welding heavy wall pipe, using TIG and stick; all joints required 100% X-ray.

• Modifying a chemical additive dosing tank for Puma Energy. Installing stainless steel pipework, 1-inch schedule 40, from tanks 1, 2, and 3, and welding stainless steel pipes, 2 to 4 inches schedule 10, using TIG.
• Enhanced project timelines through efficient handling of tasks using forklifts and heavy machinery.

• Executed turnaround shutdown maintenance in train 1, 2, and 3 AGRU utility.
• Performed welding on carbon steel, stainless steel, duplex 2209, and super duplex 2594 piping.

• welding of chrome molly pipes P91, P22 and P11, 1 inch (25mm) to 35 inch (900mm), using Tig and stick Schedule 40 to 180 using ER90S B9 2.4 filler wire for P91, ER90S B3 filler wire for P22 and ER80S B2 for P11.

• Full welding of alloy pipes for CH2 Inpex power station P91, P22 and P11, 1 inch (25mm) to 22 inch (600mm), using tig and stick Schedule 40 to 180.
• Interpreted assembly drawings and specifications and proceeded with proper welding as prescribed.

• Full Welding of "42 inch pipe carbon steel using CRC automatic welding and SAW welding process on Saipem, offshore pipeline project.

• Full welding of stainless steel, duplex, carbon pipes 2inch up to 42 inches’ schedule, 80 to 180 using Tig for root pass and flux core for filling and capping.

• Full welding of CRA (ERNiCMo-3) 20 inch (508.0mm), 22.2mm thickness in 5G position using Serimax Automatic Welding.

• Full welding of stainless tube pipes sizes 8mm, 16-20mm using 347H filler wire on steam turbine 10.

• Full welding of carbon steel pipe 20 inch (508.0mm) from light wall to Heavy wall (15.9 to 20.0mm) using JBBS Automatic Welding process.

• Executed full welding of stainless steel pipes measuring 18 to 42 inches using ER 308 2.4 filler wire.
• Performed complete welding on carbon steel pipes from 10 to 36 inches, utilizing STT for root pass and FCAW for filling and capping.
• Ensured all joints achieved 100% X-ray inspection compliance.

• Full welding of small bore and big bore stainless steel pipes, schedule 10 to 120 using Tig for root pass and FCAW for filling and capping.
• Full welding of pressurized Vessels using tig for root pass and FCAW for filling and capping.

• Fitting and welding of boiler tube pipes using tig and stick of 50mm, 100mm, 150mm carbon steel pipes sch. 40 to black liquor tank from level 1 to ground floor.

• Repair of feed water tank and replacement of manual steam injection bulb.

• Welding of carbon steel pipes 50 to 300mm.

• Full welding of boiler tube composite pipes, Replacement of old boiler tubes using gouging and LPG gas cutting.
• Fitting and welding of 250mm pipes on heather schedule 120 using Tig and Stick.

• Full welding of carbon and stainless steel pipes from 1 to 36 inch pipes, schedule 40 to 80, using different procedure of welds: STT, flux core (carbon, stainless and duplex), Mig, Sub-arc merge, Tig and stick in Kawerau Geothermal plant and Kinleith Mill Projects.

• Worked on various offshore turnaround and shutdown projects across different states in the USA, including oil rigs and liquefied natural gas projects.
• Led various projects in pipeline, tanks, and pressure vessels.
• Executed full welding on various metals such as alloy, carbon, chrome, stainless steel, Inconel, duplex and nickel with multiple weld procedures (GTAW-SMAW, FLUX CORE, GMAW, SAW).

• Full welding of 20-inch,36-inch pipes, 6010 for root pass and 8010 for filling and capping in Atthaddy Gas Transmission pipelines using 1104 downhill procedure.