Work History
Education
Timeline
Generic
Jonathan Penaso

Jonathan Penaso

Fitter/Mechanical fitter
Calista,WA

Work History

Mechanical Fitter

Taylors Engineering & Welding Services
Naval Base, WA
03.2021 - Current
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.
  • Laid out, positioned, aligned and secured parts for welding and bolt-up.
  • Fabricated, assembled, installed and maintained piping systems.
  • Skilled at working independently and collaboratively in a team environment.
  • Self-motivated, with a strong sense of personal responsibility.
  • Proven ability to learn quickly and adapt to new situations.
  • Worked well in a team setting, providing support and guidance.
  • Worked effectively in fast-paced environments.
  • Managed time efficiently in order to complete all tasks within deadlines.
  • Demonstrated respect, friendliness and willingness to help wherever needed.
  • Excellent communication skills, both verbal and written.
  • Passionate about learning and committed to continual improvement.
  • Proved successful working within tight deadlines and a fast-paced environment.
  • Strengthened communication skills through regular interactions with others.
  • Organized and detail-oriented with a strong work ethic.

Fitter

PACIFIC ASIA OVERSEAS SHIPPING CORPORATION(PASCOR)
Phillippines
07.2019 - 07.2021
  • Dismantled and reassembled delicate mechanisms.
  • Performed onsite maintenance and repair work.
  • Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.
  • Reviewed finished equipment for accurate fit and assembly.
  • Safely operated machinery to avoid injuries and accidents and encouraged others to do same.
  • Thoroughly read and comprehended blueprints in order to understand how installation was to be performed.
  • Checked proper fitting and assembly of parts and piping for [Type] project.
  • Checked instruments for accuracy and calibrated to specifications.
  • Connected pipes through caulking, gluing and welding.
  • Identified mechanical problems and determined best solutions for correction.
  • Frequently diagnosed mechanical problems and determined how to correct issues.
  • Operated variety of tools and equipment to complete mechanical repairs.
  • Implemented preventive maintenance measures to decrease emergent issues.
  • Conducted root cause analysis to identify source of mechanical system malfunctions.
  • Performed troubleshooting, diagnosis, and repair of [Type] equipment.
  • Collaborated with coworkers, discussing assembly, and needed product adjustments.
  • Followed optimum preventative maintenance plans for complex mechanical systems.
  • Developed and coordinated effective predictive, preventive, and corrective maintenance approaches.
  • Coordinated installation of systems, machinery, and components.
  • Coordinated with other engineering professionals to coordinate operation of mechanical systems.

FITTER

WALLEM MARITIME SERVICES,INC.
10.2016 - 05.2019
  • Followed optimum preventative maintenance plans for complex mechanical systems.
  • Connected pipes through caulking, gluing and welding.
  • Inspected and tested equipment, machinery and components to diagnose issues, recognize defects, and determine appropriate repairs.
  • Dismantled and reassembled delicate mechanisms.
  • Thoroughly read and comprehended blueprints in order to understand how installation was to be performed.
  • Identified mechanical problems and determined best solutions for correction.
  • Wrote work orders and parts fabrication requests.
  • Reviewed finished equipment for accurate fit and assembly.
  • Implemented preventive maintenance measures to decrease emergent issues.
  • Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.
  • Developed and coordinated effective predictive, preventive, and corrective maintenance approaches.
  • Operated variety of tools and equipment to complete mechanical repairs.
  • Safely operated machinery to avoid injuries and accidents and encouraged others to do same.
  • Coordinated with other engineering professionals to coordinate operation of mechanical systems.
  • Collaborated with coworkers, discussing assembly, and needed product adjustments.
  • Checked instruments for accuracy and calibrated to specifications.
  • Checked proper fitting and assembly of parts and piping for [Type] project.

FITTER

Elburg SHIPMANAGEMENT Phils.Inc.
PHILLIPPINES
08.2013 - 10.2016

Fitter/Welder

Eaglestar Marine Corporation
Phillippines
08.2010 - 02.2013
  • Connected pipes through caulking, gluing and welding.
  • Wrote work orders and parts fabrication requests.
  • Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
  • Used cutting torches to shape and cut metal for fabrication projects.
  • Finished welding and fabrication projects using grinders.
  • Communicated with supervisors and engineers to verify quality of finished work met specifications.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Prepared surfaces for welding by smoothing and removing debris to achieve proper adhesion and weld quality.
  • Performed preventative maintenance and minor repairs on welding and fabrication equipment to keep in optimum working condition.
  • Developed and implemented methods to increase efficiency in welding and fabrication.
  • Resolved weld-related problems by researching and using appropriate repair practices.
  • Documented welding on specified work order.
  • Checked cut length frequently for deviations in cut length specs.
  • Tested strength and quality of welds using tension, bend and penetration tests.
  • Maintained safety by wearing protective equipment, staying alert and following procedures.
  • Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
  • Welded metal components in vertical, overhead and flat positions.
  • Bolted, clamped and tack-welded parts to secure components prior to welding.
  • Welded various connections with high-quality final results.
  • Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
  • Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
  • Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
  • Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
  • Completed projects safely by closely monitoring conditions when lighting torches and using tools.
  • Detected faulty operation of equipment and defective materials and promptly resolved issues.
  • Replaced faulty parts and components in soldering process.
  • Inspected parts and components for defects in soldering process.

Millwright Fitter

NESMA Construction Company
(Al Khobar) KSA KINGDOM OF SAUDI ARABIA
02.2007 - 05.2009
  • Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
  • Maintained safety by wearing protective equipment, staying alert and following procedures.
  • Checked cut length frequently for deviations in cut length specs.
  • Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
  • Maintained clean and organized work area to prevent workplace accidents.
  • Used hoisting and rigging equipment to move heavy machinery and equipment.
  • Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
  • Made repairs and modified equipment by welding, soldering and brazing to avoid production delays.
  • Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
  • Adhered to all workplace safety policies, regulations and compliances.
  • Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries.
  • Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
  • Installed stationary industrial machinery and mechanical equipment according to layout plans.
  • Disassembled machinery parts and categorized properly before moving to storage.
  • Maintained mechanical, electrical and pneumatic systems to keep systems working together correctly.
  • Read and interpreted blueprints and schematics to understand machinery design and layout.
  • Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments with [Number]% accuracy.
  • Read blueprints to safely and efficiently assemble equipment worth up to $[Amount].
  • Implemented standard safety procedures to prevent hazards related to industrial machinery and equipment.
  • Positioned steel beams to support bedplates of machines and equipment using blueprints and schematic drawings.
  • Analyzed schematics and blueprints to fix machinery and calculate materials needed for repair.

Education

Bachelor Of Science In Marine Transportation - Shipping Industry

Misamis Institute of Technology
Ozamis City Phillippines
05.1999

Timeline

Mechanical Fitter

Taylors Engineering & Welding Services
03.2021 - Current

Fitter

PACIFIC ASIA OVERSEAS SHIPPING CORPORATION(PASCOR)
07.2019 - 07.2021

FITTER

WALLEM MARITIME SERVICES,INC.
10.2016 - 05.2019

FITTER

Elburg SHIPMANAGEMENT Phils.Inc.
08.2013 - 10.2016

Fitter/Welder

Eaglestar Marine Corporation
08.2010 - 02.2013

Millwright Fitter

NESMA Construction Company
02.2007 - 05.2009

Bachelor Of Science In Marine Transportation - Shipping Industry

Misamis Institute of Technology

Similar Profiles

  • MICHAEL LLAGAS

    MICHAEL LLAGASMICHAEL LLAGAS

    Blaster/Painter at Taylors Engineering & Welding ServicesBlaster/Painter at Taylors Engineering & Welding Services

  • Jada Demeza

    Jada DemezaJada Demeza

    HR Compliance Coordinator at Taylors Engineering & Welding ServicesHR Compliance Coordinator at Taylors Engineering & Welding Services

  • Romil Ampit

    Romil AmpitRomil Ampit

    Welder Special Class at SCW WELDING AND FABRICATIONWelder Special Class at SCW WELDING AND FABRICATION

  • Peter Paul Estella

    Peter Paul EstellaPeter Paul Estella

    Trades Assistant at Primero Group (Covalent Lithium, Mt. Holland)Trades Assistant at Primero Group (Covalent Lithium, Mt. Holland)

  • Ryley Krul

    Ryley KrulRyley Krul

    Underground Miner at ByrnecutUnderground Miner at Byrnecut

CREATE PROFILE
Jonathan PenasoFitter/Mechanical fitter