Kai (Kevin) Yang
Melbourne,Australia
Summary
Results-oriented Electrical Engineer with extensive knowledge of Australian electrical and Defense standards, specializing in power systems analysis and project management. Demonstrated success at Rubicon Associates Pty Ltd in leading critical design initiatives that prioritize compliance and innovation. Proficient in electrical drafting and collaborative execution, underscoring a commitment to technical excellence and teamwork. Aiming to leverage expertise to drive advancements in energy solutions.
Overview
12
12
years of professional experience
1
1
Certification
Work History
Electrical Engineer
Rubicon Associates Pty Ltd
Melbourne, Australia
04.2023 - Current
- Undertake Electrical Design Activities during SRR, PDR, and DDR
- Undertaking analysis and review activities such as voltage drop calculations, short circuit analysis, cable & circuit breaker (protective device) sizing, transformer sizing / selection, selecting adequate electrical devices and similar electrical calculations, to support engineering design decisions
- Requirements analysis development and verification of design against applicable standards, such as Lloyd’s, DNV, DEF (AUST) 5000 Standards, AS/NZ 3000, and AS/NZ 3008 etc
- Perform engineering investigations and develop documentation such as reports and specifications
- (comply with Defence writing standard)
- Liaise with clients, Classification Societies, and specialist subcontractors in the above areas where required
- Interface with other disciplines for the delivery of technical services
- Conduct Safety Assessment Report and Hazard Log development
- Understanding of ILS, Training and Configuration Management issues as applicable to ship design
- Representing Rubicon’s engineering team at key customer / stakeholders’ meetings
- Design in the following areas (Electrical, Communication and Combat System): Power Distribution, Lighting, Control & Monitoring, Gas Detection, Navigation System (incl
- Navigation Lights and ECDIS), Radio Frequency (wooding Analysis) and more
- Key Deliverable to Clients: RTM (Requirement Traceable Matrix), VCRM (Verification Cross Reference Matrix), Safety Assessment Report (Hazard Log), Preliminary/Detailed Design Report, Installation Specification, Inspect Test and Trail Report, Rip-out & Installation drawings (single line, schematic, layout, BOM), ILS Artefact (MWI, FMECA etc), Radio Frequency Report (wooding analysis), Engineering Investigation (Report, analysis), Ship Inspection, Design Comments Handling
- Achievements and Projects/Vessels Involved: This can be further discussed during the interview
Electrical Engineer
JDN MONOCRANE
Melbourne, Australia
06.2021 - 04.2023
- Electrical Design (24v - 400v) which mainly involved schematic design, cubicle layout design
- Calculate Max.demand, Voltage drop, short circuit current, cable cross-section by complying Australian standard
- Drawing electrical schematic, panel layout, cable schedule, part list by using Promis.e CAD
- Retrofit old Crane include add new features or replace old parts mainly using Autosketch
- Configure and program SEW VSD drive for crane’s motions
- Program and test PLC codes for new standard cranes and new applications
- Self review and peer review of design and fill out QA form
- Build up Cranes templates and optimize Drawings and QA checklists
- Onsite commissioning and troubleshooting the issues from electrical fitters
- Estimate materials and electrical parts by using Syspro (ERP business software)
- Ensured compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, maintenance, documentation, support and/or testing activities
Electrical Engineer
TONGJI Environmental Engineering Consultant
02.2018 - 12.2020
- Company Overview: Shanghai Tongji Environmental Engineering Technology Co
- Ltd
- Offers waste treatment services such as disposes industrial waste water, solid waste, steel manufacture, and other industrial projects
- Major electrical engineer involved GA drawing, integration of instrumentation, PLC programming, system schematics, panel layout, and interconnection for a steel pickling project
- Study on Detail function description, risk assessments, compliance documentation
- Major electrical engineer designs a 35kv substation in an expansion project, including layout design, earthing system design, cables and circuit break sizing
- Designed and drafted HV and LV power systems for sewage treatment by using AUTOCAD Electrical
- Coordinated with mechanical engineers to design with HVAC system, such as power supply, control system, MEP integration
- Planned and designed regular/emergency power supply and lighting systems, wire routing as the requirements from stakeholders and national standards
- Established installation standards and/or specifications by performing a wide range of detailed calculations of maximum demand and short-circuit current, cable sizing, conduct sizing, circuit breaker sizing protection coordination
- Prepared cables, switchgears calculation report, factual/interpretive reports, specifications and bills of quantities in CAD program and spreadsheets
- Ensured compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support and/or testing activities
- Onsite commissioning, including checking, inspecting and testing every piece of equipment/instrumentation and installation on the project
- Provided construction/installation support to the Site Engineer during construction and was involved in design variation and preparation of additional detail drawing
- Shanghai Tongji Environmental Engineering Technology Co
- Ltd
- Offers waste treatment services such as disposes industrial waste water, solid waste, steel manufacture, and other industrial projects
Electrical Engineer
Baosteel Construction System Integration Consultant
12.2012 - 01.2015
- Company Overview: Baosteel Construction company provides premium building consultant service which involves large residential and commercial buildings
- Primary electrical engineer designing a power system of a 5-story carpark located in Baoshan District
- This included the lighting system, emergency power system, earthing system, lightning protection, substation and switchgear layout design
- Assisted in designing the LV power system of a commercial building in Qingdao that provided onsite technical support and supplemental detail drawing to make construction smooth
- Designed HV and LV power systems for residential and commercial projects, including installation scope of work, voltage drop calculation/solution, cable calculation report, load flow analysis, protective device coordination
- Substation and switchboard room layout design
- Drafted floor plans, power system schematics by using AUTOCAD and sorted file blueprints
- Calculated cables/switchgears used and estimated material, labour and construction costs for budget preparation
- Coordinated with civil engineers, architects, mechanical engineers an site engineers to solve technical issues
- Baosteel Construction company provides premium building consultant service which involves large residential and commercial buildings
Education
Master of Engineering - Electrical and Electronic Engineering
RMIT University
01.2017
Bachelor of Engineering - Electrical Engineering
North-East University
01.2012
Skills
- Knowledge of Australian electrical standards
- Knowledge of Defense Standard
- Knowledge of Ship Standards (DNV, Lloyd's)
- Power systems and load analysis
- Cable sizing and construction selection
- Project Management
- Electrical drafting
- Technical quotation and proposal preparation
- PLC, Modbus, CANbus
Secruity Clearance
NV1
Personal Information
Nationality: Australian
Certification
- CPEng
- RPEV
- RPEQ
- NER
Languages
English
Full Professional
Chinese (Mandarin)
Professional
Accomplishments
- As a task leader, I have successfully managed and led over 10 medium-scale projects at Rubicon Associates.
- As a Electrical Engineer discipline leader, successfully deliver 2 major project
- received high praise for her exceptional work on the projects and electrical design activities
References
References available upon request.
Timeline
Electrical Engineer
Rubicon Associates Pty Ltd
04.2023 - Current
Electrical Engineer
JDN MONOCRANE
06.2021 - 04.2023
Electrical Engineer
TONGJI Environmental Engineering Consultant
02.2018 - 12.2020
Electrical Engineer
Baosteel Construction System Integration Consultant
12.2012 - 01.2015
Master of Engineering - Electrical and Electronic Engineering
RMIT University
Bachelor of Engineering - Electrical Engineering
North-East University
Similar Profiles
Mahlatse LekolwaneMahlatse Lekolwane
Inventory Assistant at Rubicon Automation (Pty)Inventory Assistant at Rubicon Automation (Pty)
Shanda BessasparisShanda Bessasparis
Bookkeeper at Rubicon Dental AssociatesBookkeeper at Rubicon Dental Associates
Souhail (Sam) DebboSouhail (Sam) Debbo
Surveying Assistant at Harrison Friedmann & Associates Pty LtdSurveying Assistant at Harrison Friedmann & Associates Pty Ltd