Leah St Jack
Kambalda West,WA
Summary
Motivated and technically minded candidate seeking to join the Australian Defence Force as a Marine Technician. Skilled in hands-on mechanical and electrical tasks, with a strong foundation in problem-solving, teamwork, and safety awareness. Committed to representing the ADF with professionalism, discipline, and a drive to continuously develop my trade skills in challenging maritime environments.
Overview
2
2
years of professional experience
1
1
Certification
Work History
Work-experience Electrician
Plumming, Gas, Electricial Services
Kambalda, WA
03.2025 - Current
- Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters.
- Repaired or replaced worn or defective parts using hand tools and power tools.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
- Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
- Performed electrical utility services for industrial-based and new building projects.
- Tested entire electrical assembly for performance levels and safety concerns.
- Installed conduit, wire and motor controls.
- Diagnosed malfunctioning wiring using test equipment to locate faults.
- Pulled insulated wires or cables through conduits to complete circuits.
- Installed conduit for new wiring systems in commercial buildings.
AU Sanitation
Cleaner
Kambalda, WA
10.2024 - Current
- Shampooed carpets, floor mats and upholstery to clean stains and spills.
- Checked for any damage to the vehicle's interior or exterior before beginning detailing work.
- Washed exterior surfaces to remove dirt and debris from the body of the vehicle.
- Cleans engine compartment by removing grease buildup with degreaser solution.
- Maintained detailed records of all services performed on each vehicle.
- Cleaned and polished vehicles using wax, polishes, detergents, brushes, water hoses, vacuums and other specialized equipment.
- Washed wide range of vehicles each day.
Volunteer
Kambalda Fire and Rescue Service
Kambalda, WA
04.2024 - Current
- Interacted professionally with victims, witnesses and other personnel associated with an incident.
- Developed strategies for containment of fires based on environmental factors such as wind direction and fuel sources.
- Assisted in the operation of fire suppression equipment, such as hoses, nozzles and ladders.
- Responded quickly to emergency calls, providing medical aid where necessary.
- Participated in fire and life safety inspections of commercial and residential properties and checked operating condition of hydrants.
- Combatted fires by holding nozzles and directing streams of fog, chemicals or water.
- Administered emergency treatment and medical care to people injured in accidents and fires.
- Trained continuously to maintain required physical fitness for demanding work.
- Educated public on ways to prevent fires and fire damage.
- Located victims trapped by fires, extricated and rendered first aid.
- Responded to fire and safety-related emergency calls in local area.
- Attended trainings to maintain wealth of knowledge in firefighting techniques and suppression methods, enabling quick decision making during actual emergencies.
- Collaborated with Hazmat to clean up chemical and oil spills.
Cert II
Electrotechnology
Kalgoorlie, WA
02.2025 - 09.2025
- Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
- Operated a variety of machinery and tools safely and efficiently.
- Installed new fittings and electrical components.
- Diagnosed electrical problems and implemented repair solutions.
- Analyzed electrical schematics, wiring diagrams, drawings, and specifications to determine layout of industrial electrical equipment installations.
- Installed and connected electrical wiring, conduits, fixtures and other components of electrical systems in accordance with all applicable codes.
- Inspected and changed out electrical system wiring.
- Created electrical wiring diagrams for prototype designs.
- Checked electrical components for proper connections and voltages.
- Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices.
- Measured and prepared supplies for electrical tasks.
- Tested completed electrical circuits and documented results.
- Performed basic soldering on wires for termination of connectors.
- Operated equipment and machinery according to safety guidelines.
- Installed electrical equipment such as storage heaters, water heaters, electric signs, switchboards, motors and other electrical equipment.
Cert II
Engineering Pathways
Kalgoorlie, WA
02.2024 - 12.2024
- Collaborated closely with team members to achieve project objectives and meet deadlines.
- Set up tools and equipment needed for fabrication jobs including drills, lathes, milling machines.
- Measure workpieces with precision measuring instruments such as calipers and micrometers.
- Grind rough edges of cut metal items using portable grinders or stationary grinding machines.
- Fabricate parts from sheet metals by cutting, bending, and forming processes.
- Assemble metal products by bolting, riveting, soldering, or brazing components together.
- Clean work areas after each job is completed to maintain a safe working environment.
- Weld metal pieces together using gas welding equipment or electric arc welders.
- Observed safety practices and procedures to maintain safe and clean work environment.
- Lifted and moved items weighing many pounds.
- Analyzed required blueprints, drawings, work orders and sketches to correctly fabricate and install products and parts.
- Cut, shaped and bent metal plates, sheets, tubes and structures.
- Operated drill presses, milling machines, rivet, and hardware presses safely and correctly.
- Repaired, modified and maintained equipment.
- Utilized hand tools, portable power tools, and other equipment to cut, shape, and assemble metal components.
Cert II
Workplace Skills
Kalgoorlie, WA
02.2024 - 12.2024
- Collaborated with internal teams to develop effective messaging across multiple channels.
- Managed the production of promotional materials such as brochures, flyers and posters to support marketing efforts.
- Manipulated digital images through advanced computer skills, video editing and image retouch and promoted technical quality of final output.
- Developed lesson plans to teach computer skills such as operating systems, word processing, spreadsheets, presentations, web design, multimedia production.
- Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
- Engaged with partners via email, phone calls or meetings about upcoming projects.
- Assisted with customer requests and answered questions to improve satisfaction.
- Adhered strictly to health and safety regulations when operating machinery.
- Contribute to the health and safety of myself and others
- Plan and apply time management.
Education
High School Diploma -
John Paul College
Kalgoorlie, WA10-2025
Skills
- Equipment maintenance
- Team collaboration
- Time management
- Fire safety training
- First Aid
- MIG welding
- Metal Fabrication
- Stick welding
- Punctual
- Confident
- Hands-on
- Coaching techniques
- Well-being Captain
- Car detailing
- Organised
- Respectful
- Teamwork
- Problem Solving
- Heavy lifting
- Fitness
- Enthusiastic
- Mature
- Discipline
- Certification programs
Certification
- Certicate of Achievement, First Aid (St John) 2024
- Australia Day: Youth of the Year - Nominee 2024
- Vocational Education Award 2024
- Certicate II in Engineering Pathways 2024
- Certicate II in Workplace Skills 2024
- Full Colours Academic Award 2024
- Christian Leadership Award 2024
- Prinipal Honours Certicate for Sport 2024
- Certicate of Participation at 'GOLDEN YOU LEADERSHIP' Camp 2023
Affiliations
- Gym (Weekly)
- Dirt karting (go karting)
- Sub-Junior to Junior Volunteer Fire and Rescue Running Competition (2019–2024)
- Senior's Volunteer Fire and Rescue Running Competition (2024-2025)
- Kambalda Volunteer Fire and Rescue Service
Timeline
Work-experience Electrician
Plumming, Gas, Electricial Services
03.2025 - Current
Cert II
Electrotechnology
02.2025 - 09.2025
AU Sanitation
Cleaner
10.2024 - Current
Volunteer
Kambalda Fire and Rescue Service
04.2024 - Current
Cert II
Engineering Pathways
02.2024 - 12.2024
Cert II
Workplace Skills
02.2024 - 12.2024
High School Diploma -
John Paul College