Lisa Frame
Subiaco,WA
Summary
A self-motivated leader with over 16 years in the Oil and Gas Industry and 2 years floating offshore Wind, working on a wide range of projects. Extensive onshore and offshore experience. Strong commercial awareness and knowledge of the whole project lifecycle from inception to delivery. Robust leadership skills involving managing and motivating others, leading large teams of engineers to work together to complete the requirements. Strong scheduling experience (proficient in MS Projects) to build schedule to include the right amount of float, understanding the critical path and ensure all milestones are achieved. Experience includes tendering, subsea construction (divers and ROV based), flexible riser installation, control system installation, mooring installation, subcontractor management, precommissioning and fabrication.
Overview
18
18
years of professional experience
Work History
Senior Planning Engineer
Havfram Wind
04.2022 - Current
- Responsible for performing all planning functions for Offshore Floating Wind
- Setup and manage the Master Project Schedule
- Complete cost comparisons for studies as well as to ensure the correct tender solution.
- Set up norms for planning activities and work with relevant technical leads to agree on the norms.
- Completed multi engineering studies for Floating offshore wind.
- Review of offshore floating wind tender/project scope of work and develop cost effective execution strategy with respect to vessel/equipment spread and installation methods.
- Complete SOWs for subcontractors and completed technical and commercial evaluations.
- Complete Risk and Opportunity Registers.
- Provide and review all qualifications
Technical Lead – Tendering
Havfram
05.2021 - 01.2022
- Supported the team with the technical solution for tender
- Creating offshore schedules using Microsoft projects, ensuring correct amount of float where required, understanding the critical path and key milestones
- Defining resource requirements for tender and project stages
- Defining, reviewing and approving engineering deliverables to support tender submission
- Managing, interfacing and supervising the engineering team
- Completing vessel selections and cost comparisons to ensure best solution
- Developing offshore execution plans
- Completing risk assessments on technical solutions to ensure optimal risk balance
- Issuing tender packages to potential subcontractors and completion of bid assessments
- Reviewing Client documentation and overall technical compliance, producing technical clarifications and qualifications.
Technical Lead – Global Project Centre Tender Department
Subsea 7
09.2019 - 07.2020
- Responsible for all technical aspects of a tender
- Developed and managed the team to deliver a compliant technical solution combined with the most competitively priced proposal
- Defining resource requirements for tender and project stages
- Defining, reviewing and approving engineering deliverables to support tender submission
- Managing, interfacing and supervising the engineering team
- Completing vessel selections and cost comparisons to ensure best solution
- Completing risk assessments on technical solutions to ensure optimal risk balance
- Coordinating logistics requirements and cost evaluations
- Issuing tender packages to potential subcontractors and completion of bid assessments
- Creating offshore schedules using Microsoft projects
- Working with planning to combine to it to a full EPCI schedule using P6
- Engaging in bi-monthly client meeting
- Completing design reviews and execution reviews with the client.
Engineering Manager – Premier Sealion FEED
Subsea 7
10.2018 - 09.2019
- Managing FEED for optimisation of cost, risk and schedule through to FID to realise best overall CAPEX/OPEX through interfacing with all Company subcontractors to ensure optimised scope of work through monitoring/reporting of costs through open book estimating
- Demonstrating leadership in safety and quality performance of the project
- Primary day to day liaison with client and Subsea 7 team, producing weekly and monthly reporting to Client
- Responsible for ensuring that the FEED work scope is carried out in compliance with Subsea 7 standards, Client specifications and appropriate legislative standards
- Reviewing, approving and controlling the man-hours used on the FEED
- Forecasting reimbursable costs associated with the FEED
- Development of Variation Orders
- Definition of job descriptions for key project personnel and monitor the project team's performance and provide regular feedback to the team and functional management
- Delivering cost optimised T&I solution
- Assessment of vessel waiting on weather analysis and development of lump sum proposal to the client
- Development of detailed execute schedule
- Risk management, identifying threats and opportunities.
Technical Lead – Global Project Centre Tender Department
Subsea 7
07.2016 - 09.2019
- Responsible for all technical aspects of tenders, ranging in value from $200m to > $1Bn
- Developed and managed the team to deliver a compliant technical solution combined with the most competitively priced proposal
- Defining resource requirements for tender and project stages
- Defining, reviewing and approving engineering deliverables to support tender submission
- Managing, interfacing and supervising the engineering team
- Completing vessel selections and cost comparisons to ensure best solution
- Developing offshore execution plans
- Completing risk assessments on technical solutions to ensure optimal risk balance
- Coordinating logistics requirements and cost evaluations
- Issuing tender packages to potential subcontractors and completion of bid assessments
- Reviewing Client documentation and overall technical compliance, producing technical clarifications and qualifications
- Creating offshore schedules using Microsoft projects
- Working with planning to combine to it to a full EPCI schedule using P6, to ensure correct amount of float where required, understanding the critical path and to estimate first oil/gas.
Engineering Manager – Premier Sealion FEED
Subsea 7
02.2016 - 11.2016
- Developing and maintaining an open collaborative relationship with the client
- Worked closely and efficiently with client's other subcontractors by attending and inputting workshops and utilising the interface system
- Managed the FEED budget of CTRs, getting the right resources at the right time
- Produced offshore schedules for high level evaluation using Microsoft Project
- Ensured correct practices for offshore activities are installed from the start.
Technical Lead – AFGOM Tender Department
Subsea 7
07.2012 - 02.2016
- Same as above Technical lead role for multiple tenders for Africa and Gulf of Mexico region.
Senior Flying Squad Engineer – BP Block 31 PSVM
Subsea 7
07.2011 - 07.2012
- Lead engineering based onshore Angola with responsibilities for: Preparing and completing barge load outs of piles and Manifold Support Structures
- Liaison with 3rd party contractors to ensure Subsea 7 equipment correctly installed on CPI structures and final acceptance after trial lifts prior to load out.
Principal Project Engineer – BP Block 31 PSVM
Subsea 7
02.2009 - 07.2012
- Responsible for installation workscope of 9 dynamic risers from a rigid riser to the FPSO, and 5 dynamic umbilicals from the FPSO to the seabed on the PSVM field in 2000m WD offshore Angola
- Offshore lead on the FPSO for all turret activities including mobilisation, pull ins and pre-commissioning
- Managed subcontractors on the FPSO to complete all the pre-commissioning activities on the risers and umbilicals as well as the Pull in Team
- Co-ordinated and fulfilling all permit activities and HSEQ requirements onboard the FPSO
- Produced procedure/ technical notes/ drawings, to ensure pull in work scope was completed safely and efficiently
- Organised and manage SIT work scope in Singapore fab yard
- Oversaw the sourcing of equipment, tools and rigging
- Liaised directly with clients and utilising the interface system
- Ensured all KPI's for work scope were completed on time
- Participated in HAZID and Risk Assessments.
Project Engineer – Venture Projects
Subsea 7
07.2008 - 07.2009
- Engineer responsible for multiple DSV based umbilical tie-in work scopes followed by subsequent load out and installation of 2 off umbilicals using a horizontal lay vessel.
Lead Project Engineer – Talisman Galley Phase 2
Subsea 7
04.2008 - 07.2008
- Lead Engineer both on and offshore tasked with producing procedures, organising & presenting HIRA's, sourcing equipment and preparing the mobilisation
- Lead Engineer on DSV during workscope, completing well isolations, flexible disconnection/reconnection and strength testing field export pipeline.
Project Engineer – Total Jura Bundle
Subsea 7
11.2007 - 04.2008
- Responsible engineering for development of procedure for control depth tow the bundle to the field, sourcing & checking the equipment and completing the pre-launch equipment and weight checks
- Offshore support on the Vessel during launch, tow and installation.
Project Engineer – Talisman Galley Phase 1
Subsea 7
11.2006 - 03.2008
- Onshore and offshore based project engineer during Talisman Galley decommissioning Project
- Work involved production of procedures, sourcing equipment and HIRA participation for removal & recovery of 200Te Mid-Water Arch, flushing export flowlines, well isolation & barrier testing and riser repositioning
- Completed subsequent offshore phases of project on various Dive Vessels.
Graduate – Project Support
Subsea 7
09.2005 - 02.2008
- Performing as equipment support engineer and project support engineer both onshore and offshore for the construction and vertical lay vessel
- Involved in large scale equipment and flowline mobilisations in Gulf of Mexico for Anadarko Project
- Producing basic structural and spool lift analyses for variety of North Sea based projects.
Education
B.Eng. Honours Degree with an Industrial Diploma - Manufacturing Engineering and Management with German
Nottingham University
12.2003
Skills
- Problem Solving
- Microsoft Project and Operations Planning
- Team Leadership
- Commercial Awareness
Timeline
Senior Planning Engineer
Havfram Wind
04.2022 - Current
Technical Lead – Tendering
Havfram
05.2021 - 01.2022
Technical Lead – Global Project Centre Tender Department
Subsea 7
09.2019 - 07.2020
Engineering Manager – Premier Sealion FEED
Subsea 7
10.2018 - 09.2019
Technical Lead – Global Project Centre Tender Department
Subsea 7
07.2016 - 09.2019
Engineering Manager – Premier Sealion FEED
Subsea 7
02.2016 - 11.2016
Technical Lead – AFGOM Tender Department
Subsea 7
07.2012 - 02.2016
Senior Flying Squad Engineer – BP Block 31 PSVM
Subsea 7
07.2011 - 07.2012
Principal Project Engineer – BP Block 31 PSVM
Subsea 7
02.2009 - 07.2012
Project Engineer – Venture Projects
Subsea 7
07.2008 - 07.2009
Lead Project Engineer – Talisman Galley Phase 2
Subsea 7
04.2008 - 07.2008
Project Engineer – Total Jura Bundle
Subsea 7
11.2007 - 04.2008
Project Engineer – Talisman Galley Phase 1
Subsea 7
11.2006 - 03.2008
Graduate – Project Support
Subsea 7
09.2005 - 02.2008
B.Eng. Honours Degree with an Industrial Diploma - Manufacturing Engineering and Management with German
Nottingham University
Similar Profiles
RENGARAJ PITCHAIMANIRENGARAJ PITCHAIMANI
Assembly Quality Lead APAC at Vestas Wind Technologies India Pvt Ltd (Mfrs of Wind Turbines)Assembly Quality Lead APAC at Vestas Wind Technologies India Pvt Ltd (Mfrs of Wind Turbines)
Baochai ZhengBaochai Zheng
Paralegal at SouthCoast Wind/OW North America/Golden State WindParalegal at SouthCoast Wind/OW North America/Golden State Wind
Philip KramPhilip Kram
Project Development Team at Wisc Wind - D.O.E Collegiate Wind Competition TeamProject Development Team at Wisc Wind - D.O.E Collegiate Wind Competition Team
Naoko BoltonNaoko Bolton
School Coordinator at Gold Educational TourSchool Coordinator at Gold Educational Tour
Bryce GrantBryce Grant
Drillers Offsider at WebdrillDrillers Offsider at Webdrill