Lucian Marius Olah

Major Outage at Eraring Power Station Unit #3

Working on steam turbines, isolations, removal of covers over pipework, undoing studs/nuts using HyTorq equipment, removing rotors, diaphragms, precision measuring of crucial equipment, and recording the data.

Stoning of half joints (sealing faces) after inspections from the client and reassembly.

Made sure that mechanical parts were properly fit and assembled while observing tight project deadlines.

Assembled mechanical parts into larger subassemblies or complete machines and equipment.

• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Dismantled and reassembled delicate mechanisms.
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.

Contracted to Gamuda, Laing O'Rourke, on the Sydney Metro Western Tunneling Package Project.

Part of a team that saw the turnaround of two tunnel boring machines and gantries pulled out, stripped for transport from Olympic Park to Rose Hill, where they received some repairs and assembly to cut towards Westmead, NSW.

Made sure that mechanical parts were properly fit and assembled while observing tight project deadlines.

Adjusted functional parts of mechanical devices according to specifications.

All work was carried out and completed according to the schedule.

• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Dismantled and reassembled delicate mechanisms.

Shut down at a Major Hazardous facility in Newcastle NSW.

Duties included isolations and de-isolations, removal/replacement of valves, heat exchangers, modifications of pipework, heat tracing, opening and closing for confined space work, and flange management.

Oversaw startup and shut-down of processing equipment and created strategic production plans to meet output and schedule requirements.

• Performed onsite maintenance and repair work.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Reduced downtime by diagnosing and troubleshooting mechanical issues efficiently.

• Outage at Bayswater Powerstation of Unit 1
• Working on the steam turbines, removing of covers, cross over pipework, undoing studs/nuts using Hytorq equipment, removing of rotors, diaphragms, precision measuring of packers, shims and recording values
• Stoning of sealing faces after inspection and put it all back together
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.
• Completed projects on schedule through diligent time management skills and prioritizing tasks effectively under pressure.
• Demonstrated expertise using various hand tools, power tools, measuring devices, and precision instruments for accurate job execution.

• Working on the Western Sydney Airport Metro Project contracted to CPBG
• Assembly of the two tunnel boring machines and associated gantries
• Mechanical fitting, rigging, of equipment, use of telescopic handler installation of Service Pipework, cooling tower, air compressors is all part of the scope
• Working with Herrenkncht( supplier of the TBMs and gantries) as per their directions
• Followed safe work practices, which included fall protection and personal protective equipment.
• Increased workplace safety by adhering to strict guidelines and protocols during daily operations.

• Contracted to Viva Energy where I performed breakdown, planned and minor project works at the Gore Bay site (Sydney Harbour) where bulk fuel tankers came in, docked and unloaded their fuels
• Work included removal of redundant pipes, valves, removing and installing new landing valves for fire hydrants site wide, Removal/installing new safety valves, installing new nonslip treads for stairs and other safety improvements site wide
• Performed onsite maintenance and repair work.
• Increased productivity with the timely replacement of worn parts and maintaining optimal machine conditions.
• Dismantled and reassembled delicate mechanisms.
• Provided reliable support for emergency breakdowns, minimizing production delays and losses due to unplanned downtime.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.

• Working on an underground crusher/conveyor expansion project in Orange
• Installation, modification, pre commissioning and commissioning of crusher, chutes, apron feeders, fire suppression piping, service air and water piping and 2 conveyors and one transfer station
• Project finished
• Followed safe work practices, which included fall protection and personal protective equipment.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Displayed strong problem-solving skills by swiftly identifying and implementing solutions to address mechanical malfunctions or breakdowns.
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.

• Corrective, planned maintenance, project work and on call work on Sydney Water assets and treatment plants
• Pumps, valves, Non return valves, mixers, dosing pumps are some of the equipment that I worked on
• Minor projects to improve performance of assets
• Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
• Resolved mechanical issues using both technical and manual skills.
• Assembled and disassembled equipment to perform repairs and maintenance.
• Frequently diagnosed mechanical problems and determined how to correct issues.
• Maintained clean and organized work area to easily locate repairing tools and equipment.
• Monitored equipment performance to confirm proper and efficient function.
• Inspected and tested equipment, machinery and components to diagnose issues, recognize defects, and determine appropriate repairs.

• Cadia Gold mine (Orange, NSW), shutdown works, Visy Paper and Pulp (Tumut, NSW) Annual shut down works, Australian Paper mill (Maryvale, VIC) Shutdown works
• Performed onsite maintenance and repair work.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Increased productivity with the timely replacement of worn parts and maintaining optimal machine conditions.
• Improved equipment performance by conducting regular maintenance checks and repairs.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.
• Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.

• Conveyor maintenance and breakdown/installation on the Sydney Metro Rail 2 Tunnels
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Performed onsite maintenance and repair work.
• Increased productivity with the timely replacement of worn parts and maintaining optimal machine conditions.
• Dismantled and reassembled delicate mechanisms.
• Reviewed finished equipment for accurate fit and assembly.

• Overhaul of brake components and associated gear for Queensland Rail, Aurizon, Downer Rail
• Stripping of unit, cleaning, sand blasting, assess for damage, wear as per job order
• Testing of unit and completing test sheet and sign off once finished
• Resolved mechanical issues using both technical and manual skills.
• Assembled and disassembled equipment to perform repairs and maintenance.
• Frequently diagnosed mechanical problems and determined how to correct issues.
• Maintained clean and organized work area to easily locate repairing tools and equipment.
• Monitored equipment performance to confirm proper and efficient function.
• Inspected and tested equipment, machinery and components to diagnose issues, recognize defects, and determine appropriate repairs.
• Performed troubleshooting, diagnosis, and repair of [Type] equipment.
• Read and interpreted technical drawings and schematics to understand equipment design and proper maintenance.

• Combined Cycle Power Plant mechanical works/Commissioning on the Ichthys LNG Project in Darwin, N.T
• Flange Management, Authorised Gas Tester, Laser Alignments, Fin Fans set up and tip clearances/pitch
• Mechanical Inspections and Isolations
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Displayed strong problem-solving skills by swiftly identifying and implementing solutions to address mechanical malfunctions or breakdowns.
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Reviewed finished equipment for accurate fit and assembly.

• Shutdown works at Shell (QGC) Central Processing Plant outside of Dalby, Qld
• Santos at Curtis Island, Condamine Powerstation, Olympic Dam in South Australia and Goonyella in Moranbah, Qld
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.

• Flange management, valve installation, Fin Fans alignments and adjustments
• Mechanical Isolations
• Compressors dry gas seals install
• Inspections of vessels and sign offs
• APLNG Project Curtis Island, Queensland
• Followed safe work practices, which included fall protection and personal protective equipment.
• Performed onsite maintenance and repair work.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Completed projects on schedule through diligent time management skills and prioritizing tasks effectively under pressure.
• Documented all completed jobs meticulously in accordance with company policies to ensure accurate record-keeping for future reference or audits purposes.
• Safely operated machinery to avoid injuries and accidents and encouraged others to do same.
• Reviewed finished equipment for accurate fit and assembly.
• Streamlined workflows through consistent communication with team members regarding work orders, progress updates, and potential challenges.

• Working on the QCLNG project in Chinchilla
• QGC Permit Holder, Verification of work, inspection, sign offs, raising of ITR’s, alignments witnessing and signing off as QGC,s representative
• Mechanical Isolations, Commissioning of the Field Compression Stations
• Enhanced client satisfaction by providing exceptional on-site support and training to operators.
• Frequently diagnosed mechanical problems and determined how to correct issues.
• Maintained clean and organized work area to easily locate repairing tools and equipment.
• Monitored equipment performance to confirm proper and efficient function.
• Resolved mechanical issues using both technical and manual skills.
• Completed complex repair projects within tight deadlines, minimizing production disruptions and ensuring timely delivery of finished products to customers.
• Read and interpreted technical drawings and schematics to understand equipment design and proper maintenance.

• Everyday maintenance, Mechanical isolations, shutdowns and breakdowns at Caltex Refinery, Kurnell, Sydney
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Performed onsite maintenance and repair work.
• Increased productivity with the timely replacement of worn parts and maintaining optimal machine conditions.
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.
• Displayed strong problem-solving skills by swiftly identifying and implementing solutions to address mechanical malfunctions or breakdowns.

• Working on the Pluto Project in Karratha W.A
• Construction of a Gas plant
• Mechanical Isolations, Psv install and sign offs, flange management
• Permit Holder for Woodside Rotating equipment alignment and sign offs
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Ran performance tests and operated various control equipment.
• Carefully reviewed project blueprints before starting work and addressed any concerns with supervisors.
• Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.
• Enhanced operational efficiency by calibrating tools, instruments, and equipment according to specifications.
• Thoroughly read and comprehended blueprints in order to understand how installation was to be performed.
• Completed detailed inspections of electrical and mechanical components to identify issues.

• Construction on mine site (Olympic Dam) of modules to go underground to be installed and fixed plant maintenance
• Surface as well as underground
• Conveyor and shaft maintenance
• Performed onsite maintenance and repair work.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Operated variety of tools and equipment to complete mechanical repairs.
• Collaborated with coworkers, discussing assembly, and needed product adjustments.
• Identified mechanical problems and determined best solutions for correction.

• Contracted to Bombardier to repair/modification of gear units, oil sampling, vibration analysis, backlash checks, testing in Test rig
• Increased workplace safety by adhering to strict guidelines and protocols during daily operations.
• Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.
• Applied strong problem-solving skills to address unexpected challenges that arose during the fitting process.
• Improved overall project completion time through proficient use of hand tools, power tools, and specialized machinery.
• Streamlined assembly processes with precise measurements and cutting, resulting in improved quality of finished products.
• Supported a positive work environment by fostering collaboration, sharing knowledge, and assisting peers as needed.
• Performed detailed inspections of completed assemblies, ensuring adherence to quality standards and client requirements.
• Recorded center to center measurements of area requiring field run systems and fabricated system based on measurements taken, applying specialized fit up techniques as appropriate.

• Installation of machinery (Smoke duct) for the Clem7 Tunnel
• Maintenance on the tunnel boring machines and conveyor works
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Performed onsite maintenance and repair work.
• Contributed to project completion by assembling, fitting, and aligning complex mechanical components accurately.
• Displayed strong problem-solving skills by swiftly identifying and implementing solutions to address mechanical malfunctions or breakdowns.
• Identified potential issues and spoke with supervisors to immediately determine best methods for remediation.
• Upheld the highest standards of quality workmanship, consistently meeting or exceeding expectations for precision, accuracy, and attention to detail in all tasks performed.
• Checked proper fitting and assembly of parts and piping for [Type] project.
• Coordinated installation of systems, machinery, and components.

• Every day maintenance in a brick making factory preventative and mainly breakdown maintenance
• Looking from the crusher through the hammer mills, out to the extruder, setting and through the dryers kiln and then dehacked and palletized

• Dismantling of process plant on mine site in Far North Queensland to be relocated in Africa
• Working underground on a conveyors finish crusher and installing and commissioning in West
• Australia

• Installation of conveyors on construction site for Siemens Dematic (Woolworths distribution center)
• Crane
• Installation of SRM cranes and EPRM’s and Commissioning

• Contract at Golden Circle as a maintenance fitter performing preventative maintenance, shut down and breakdown work over 3 rotating shifts

• Preventative maintenance of high speed converting machines such rotary die cutters, flexo folder gluers, tie machines, Strapping machines and pallet conveyors and weekly shutdowns

• Working at a food manufacturing (frozen meals) company looking after production and performing preventative maintenance, and writing out work procedures
• Experience with SCADA and BMS systems and weekly and annual shutdowns

• Working on QR rolling stock wagons, steam locomotives at Ipswich Workshops and at Redbank Workshops working on the E.M.U
• Overhaul program
• Running repairs on rollingstock
• Brake repiping and upgrading

• Shutdown work, special projects, preventative maintenance, machinery installation, commissioning of machinery
• Companies where I have Worked at include; News Limited (Daily Telegraph), Weston’s Milling Sydney Printers (The Sydney Morning Herald)

• Started my apprenticeship as a Fitter and Turner
• Preventative/breakdown maintenance