Malcolm Laws
Karoonda,Australia
Summary
Dynamic Senior Mechanical Project Engineer with Voith Hydro, adept at project management and mechanical design. Proven track record in delivering complex installations and optimizing tender evaluations. Skilled in developing innovative installation methodologies while ensuring quality assurance. Strong leadership and problem-solving abilities drive successful project outcomes.
Overview
22
22
years of professional experience
Work History
Senior Mechanical Project Engineer
Voith Hydro
Cooma, New South Wales
01.2023 - Current
- Delivered mechanical site management for the Voith turbines and balance of plant equipment, overseeing 5 project engineers by assigning tasks and providing technical support.
- Developed scope of works for mechanical package tendering and conducted tender evaluations.
- Developed installation methodologies and pre-work plans to streamline project execution.
- Delivery of the majority of large mechanical equipment to the site, planning with the freight forwarder as majority was over size over mass (OSOM).
- Processed document requests, conducted reviews, and secured approvals to onboard contractors.
- Coordinated warehouses, offices, and laydown yards to establish site infrastructure.
- Design review and compliance with Australian Standards.
Site Manager / Senior Project Engineer
General Trade Industries
Wallumbilla, Queensland
01.2013 - Current
- Managed the daily operations of site facilities, including labour resourcing, rostering, accommodation bookings, on-site training, verification of competency, and HSE compliance with the Petroleum and Gas Safety Act 2004.
- Delivered upgrade works at the Wallumbilla gas facility, ensuring compliance with new EPA requirements. Upgrades included a new closed drain system, filter coalescer, regeneration gas beds, flare stack, instrumentation control system, and upgrades to existing electrical works to meet Australian standards.
- Prepared comprehensive project reports for client and directors, detailing budget, progress, quality, HSE, and forecasting.
- Submitted variations to client for out-of-scope works, ensuring project alignment with client expectations.
- Collaborated with client-appointed designers to rectify constructability issues, enhancing project execution.
- Completed the project and delivered the QA and MDR package.
Mechanical Project Engineer
CPB
Miles, Queensland
01.2021 - 12.2022
- Validated well head design, incorporating reverse engineering with alternative equipment to achieve design intent.
- Proved well isolations and disassembled mechanical well head equipment, valves, gauges, separators, and PSV's rupture discs.
- Executed rectification work on 50 well heads in Miles / Chinchilla area, ensuring operational integrity.
- Proving integrity of gas / water separators, with 3rd party inspections and testing.
- Replaced all mechanical equipment with new or refurbished items and installed new pipework when wells were reconfigured.
- Commissioned and tested equipment, ensuring readiness before handing over to operations.
Project Manager
Minetech
Olympic Dam, South Australia
01.2021 - 12.2022
- Oversaw construction, design, budget, and reporting obligations for SMP and E&I raised bore projects, ensuring installation of exhaust fans and inlet ductwork maintained ventilation for underground mine operations.
- Developing and maintaining a 12 month schedule based on labour, material, and site availability.
- Labour allocating and scheduling to meet scheduled activities.
- Submitted monthly progress claims and processed variation requests to ensure timely project financing and compliance.
- Secured quality assurance sign-off and acceptance from the client.
- Developed pricing strategies and prepared project quotes to align with client expectations and project goals.
- Design reviews, working with designers for amendments, product specifications.
Mechanical Project Engineer
BHP
Olympic Dam, South Australia
01.2021 - 12.2021
- Oversaw construction activities performed by the SMP contractor, including installation of approximately 20km of DN400 HDPE lined steel pipe, valves, scour valves, and valve station works.
- Managed contractor budget and forecasting to achieve timely project completion.
- Reviewed design documentation to enhance constructability and cost efficiency.
- Follow the design change process to implement efficient design changes.
- Accepted and signed off on contractor ITPs, FICs, and quality documentation.
- Inspection of incoming client supplied items to ensure compliance to site specifications and Australian Standards.
Mechanical Engineer
RSGx
Melbourne, Victoria
01.2020 - 12.2020
- Estimated man hours for mechanical services package, integrating fire and life safety systems, ventilation, and service piping for comprehensive project planning.
- Designed and developed alternative construction sequences and ventilation systems to meet client schedule requirements.
- Compiled industry costs and estimates for total tunnel tender, ensuring accurate budgeting and competitive bids.
- Developed scopes for pricing packages, enhancing clarity for vendor negotiations.
Project Engineer
Enprocon
Brisbane, Queensland
01.2019 - 12.2019
- Executed daily work crew activities to ensure project timelines and standards were met.
- Set levels and designed DDA access paths to comply with current standards.
- Facilitated weekly meetings with government clients to align project expectations and progress.
- Designed and manufactured onsite equipment, including post setting jigs and reusable formwork moulds, to enhance operational efficiency.
Mechanical Utilities Engineer
CPB Samsung John Holland Joint Venture (CSJ)
Sydney, New South Wales
01.2016 - 12.2018
- Identified service clashes with civil road design, including potable water, sewer (pumped and gravity), gas, and stormwater.
- Oversaw relocation of services, coordinating design, authority approval, implementation, and handover to ensure compliance and project continuity.
- Resolved constructability issues with onsite design changes and direct communication with authorities, facilitating smoother project execution.
- Closed out work lots, ensuring adherence to internal quality assurance standards and contributing to project completion.
Mechanical Project Engineer
EPSA Mechanical
Sale, Victoria
01.2016 - 12.2016
- Set up and implemented project QA system, collaborating with off-site fabricators and on-site construction to compile completion documentation.
- Designed and procured site-run piping and support systems for construction projects.
- Quality control of on site installations, ensuring they meet the appropriate standards.
- Resolved onsite construction issues, including design clashes, work crew sequencing, delivery requirements, and inspections.
Mechanical Procurement and Logistics Engineer
Entrepose Vinci Thiess Joint Venture (EVT)
Onslow, Western Australia
01.2015 - 12.2016
- Received, stored, and distributed offsite fabricated mechanical fit out components for two LNG and two condensate tanks, ensuring timely availability during construction.
- Coordinated timely material distribution to multiple work crews, supporting seamless project execution.
- Tracked, maintained, and reordered consumable items and tools, ensuring availability for a workforce of over 500.
- Managed a 10-person work crew in the operation of plant equipment.
- Receiving 3 ships through the project’s port and clearing customs requirements.
- Maintained quality records for the storage of sensitive equipment.
Mechanical Project Engineer
Thiess
Rockingham, Western Australia
01.2014 - 12.2015
- Directed mechanical construction activities of SMP contractor, ensuring alignment with project specifications.
- Accepted and signed off on contractor ITPs, FICs, and quality documentation to maintain compliance with project standards.
- Review of design documentation for efficient and cost effective constructability.
- Inspected incoming client-supplied items for adherence to site specifications and Australian Standards, ensuring quality assurance.
- Material take offs and ordering of small bore piping and sundry equipment.
Project Engineer
Murphy Pipe and Civil
Dalby, Queensland
01.2012 - 12.2013
- Delivered gathering lines from well head separators to field compressor stations, ensuring timely project completion.
- Compiled construction documentation to meet project execution quality standards, enhancing compliance and accountability.
- Gathered and organized completed installation quality documentation for client handover.
- Developed product quality and batch traceability systems for field use, improving tracking and reliability.
- Field implementation of safety systems, policies, procedures and statutory regulations.
- Finalized projects and provided QA documentation.
Project Engineer
Thiess Degremont Joint Venture
Wonthaggi, Victoria
01.2010 - 12.2012
- Delivered Pre-Treatment Backwash System across 3 streams, ensuring operational efficiency.
- Including 2000m3/h pumps, GRP and Stainless piping, Air Blowers, Slurry Agitators.
- Supervised technical activities, planned daily tasks, forecasted weekly goals, managed budget, and reported progress to stakeholders.
- Implemented quality and traceability systems, including joint traceability and weld maps, to enhance compliance and minimize contamination risks.
Building Services Manager/Designer/Director
MLEI Consulting Engineers
Adelaide, South Australia
01.2009 - 12.2010
- Cultivated client relationships by delivering quality and reliable service.
- Day to day management and work flow of the department.
- Supervised designers and drafters to enhance office safety and productivity.
- Controlled quality for all HVAC, hydraulic, and electrical designs.
- Coordinated subcontractor efforts to ensure adherence to project timelines and quality standards.
- Liaising with contractors during construction.
Project Engineer/Administration Coordinator - Jacinth Ambrosia Alliance (PB and Iluka)
Parsons Brinckerhoff Australia
Adelaide, South Australia
01.2008 - 12.2009
- Reporting directly to the Construction Manager.
- Managed compliance of contracts with onsite contractors to ensure project alignment with contractual obligations.
- Supervised onsite contractors to ensure adherence to quality, safety, and Australian standards in construction.
- Developed and executed site administration systems to streamline processes and support project efficiency.
- Managing the operations planning and maintenance for the running of 3 construction camps.
- Reported physical progress of construction projects.
- Validating progress billing submitted by contractors.
Mechanical Project Engineer - BHP Billiton Olympic Dam
Kellogg Brown & Root
Adelaide, South Australia
01.2008 - 12.2009
- Reporting directly to the Construction Manager.
- Interfacing with the clients operations department for tie in work to live plant.
- Supervised onsite contractors to ensure compliance with quality, safety, and specifications.
- Managed subcontractor contracts on-site to facilitate smooth project execution and adherence to standards.
- Coordinated QA and QC documentation for seamless handover to operations.
- Reported progress to clients and verified subcontractor payment milestones.
Mechanical Project Engineer - Zinifex Port Pirie Smelter
Kellogg Brown & Root
Adelaide, South Australia
01.2006 - 12.2007
- Managed project budgets and reported progress to project manager.
- Supervised onsite construction works, ensuring quality, safety, and engineering compliance.
- Coordinating with operations for plant shutdowns for scoped upgrades to be completed.
- Prepared and tendered scopes of work for plant capital upgrades under $5m.
- Procuring materials and specialist contractors to complete upgrade works.
- Managing subcontractor contracts.
Mechanical R&D Designer
Primary Sales Australia
Midvale, Western Australia
01.2004 - 12.2005
- Designed and produced prototypes for operational and reliability testing, ensuring product performance standards.
- Collaborated with Operations Manager, Managing Director, and Production Manager on research, design, and development of new products.
- Created detailed shop drawings for production, facilitating accurate manufacturing processes.
Education
Bachelor of Engineering - Advanced Manufacturing and Mechanical Engineering
University of South Australia
Adelaide, South Australia01-2005
South Australian Certificate of Education -
Trinity College
Gawler, South Australia01-2001
Skills
- Mechanical design
- Hydraulic systems
- Project management
- Site delivery
- Tender evaluation
- Installation methodologies
- Quality assurance
References
Available upon request
Qualifications And Training
- Bachelor of Engineering (Mechanical and Advanced Manufacturing)
- National Construction Industry White Card
- Senior First Aid
- 4x4 Driver Training
- MS Office, MS Project, Excel, Auto CAD
Timeline
Senior Mechanical Project Engineer
Voith Hydro
01.2023 - Current
Mechanical Project Engineer
CPB
01.2021 - 12.2022
Project Manager
Minetech
01.2021 - 12.2022
Mechanical Project Engineer
BHP
01.2021 - 12.2021
Mechanical Engineer
RSGx
01.2020 - 12.2020
Project Engineer
Enprocon
01.2019 - 12.2019
Mechanical Utilities Engineer
CPB Samsung John Holland Joint Venture (CSJ)
01.2016 - 12.2018
Mechanical Project Engineer
EPSA Mechanical
01.2016 - 12.2016
Mechanical Procurement and Logistics Engineer
Entrepose Vinci Thiess Joint Venture (EVT)
01.2015 - 12.2016
Mechanical Project Engineer
Thiess
01.2014 - 12.2015
Site Manager / Senior Project Engineer
General Trade Industries
01.2013 - Current
Project Engineer
Murphy Pipe and Civil
01.2012 - 12.2013
Project Engineer
Thiess Degremont Joint Venture
01.2010 - 12.2012
Building Services Manager/Designer/Director
MLEI Consulting Engineers
01.2009 - 12.2010
Project Engineer/Administration Coordinator - Jacinth Ambrosia Alliance (PB and Iluka)
Parsons Brinckerhoff Australia
01.2008 - 12.2009
Mechanical Project Engineer - BHP Billiton Olympic Dam
Kellogg Brown & Root
01.2008 - 12.2009
Mechanical Project Engineer - Zinifex Port Pirie Smelter
Kellogg Brown & Root
01.2006 - 12.2007
Mechanical R&D Designer
Primary Sales Australia
01.2004 - 12.2005
Bachelor of Engineering - Advanced Manufacturing and Mechanical Engineering
University of South Australia
South Australian Certificate of Education -
Trinity College