MARK CASTILLO
Logan/Hillcrest,Qld
Summary
To be able to share my knowledge and skills for the productivity of the company that I will be working with and to learn more things that would be beneficial to this organization.
Overview
21
21
years of professional experience
1
1
Certification
Work History
Boilermaker
Monodelphous
Darwin/gove, NT
11.2023 - Current
- Opened, cleaned and repaired pressure vessels.
- Analyzed specifications, diagrams and blueprints for each job.
- Used oxyacetylene torch to cut through steel plate for fabrication purposes.
Boilermaker
TCW-BHP
Olympic Dam, SA
09.2024 - 10.2024
- Opened, cleaned and repaired pressure vessels.
- Analyzed specifications, diagrams and blueprints for each job.
- Used oxyacetylene torch to cut through steel plate for fabrication purposes.
- Cut materials to size with torches and hand tools.
- Measured and marked cutting lines on material using a ruler or scribe.
- Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
- Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
- Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
- Welded components in flat, vertical, or overhead positions.
- Followed safety procedures when working around high-pressure systems.
OZQ Engineering
, Qld
01.2021 - 06.2024
- Mica St Carole Park
Boilermaker
OZQ
Brisbane/carole Park, Qld
01.2012 - 06.2024
- Cut, formed and welded steel to make and repair metal components.
- Faller,( Manager Human Resources Department, Duties & Responsibilities
- Full welding of Carbon steel pipes sizes from ¾” to unlimited sizes, Stainless steel pipes from ¾” to unlimited sizes all with 100% x - ray
- Full welding of pipe supports and structures
- Maintain good working knowledge of all welding positions and instrument operation
- Collaborate with manufacturing engineers to address issues related to damaged ducts
- Also oversee the training and supervision of inexperienced welders to ensure welds are up to acceptable standards
- I know the welding specifications of many types of metal
- I learned advance welding techniques and may hand weld or use robots to weld metal components
- I exposed to intense and blinding heat & must take special care to ensure our own safety and the safety of those around us
- I wear special gloves and aprons to prevent sparks and flame from burning our clothes and skin
- I must use my knowledge of metallurgy and chemistry in order to place., : Jocelyn S
- Garcia, Adviser - HR
- Duties & Responsibilities:
- Set up welding machines based on the job and hand or using a welding Procedures Specifications
- Read and interpret blueprints and/or drawing to determine the specific welding requirements
- Assign in fabrication shop, field, tank, vessels and column:
- Welding of pipe and supports, grinding, lay-out and full welding
- Pick the materials to join or cut and arrange them in appropriate configuration
- Ability to use basic welding equipment and engage in welding and cutting processes
- Ability to do basic math, comprehend geometry and perform simple measurements
- Perform other types of welds based on project needs
- Select proper fillers for jobs based on previous experience or project instructions
- Coordinate with field labor crew for efficient instructions.
Boilermaker
UGL
Mackay/sarina, Qld
02.2024 - 05.2024
- Opened, cleaned and repaired pressure vessels.
- Analyzed specifications, diagrams and blueprints for each job.
- Used oxyacetylene torch to cut through steel plate for fabrication purposes.
- Assembled parts into complete units by welding them together.
- Studied blueprints to determine locations, relationships, and dimensions of parts.
- Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
BOILERMAKER/WELDER
Transafe Engineering Pty. Ltd
Randolph, St Rocklea, Qld
09.2006 - 10.2011
- Number : 1300 883 334
- Contact Person : Ric Ayala
- Duties, :
- Uses plans, diagrams, blueprints and work request to determine project design and works with request to ensure needs are met
- Welding of aluminum, stainless & carbon steel
- Assembling and welding of different kind of toolboxes
- Effectively layout designs, supervise workers and distribute workloads to maximize productivity
- Following of different kind of procedure base on my job
- Responsible for designing, cutting, and permanently joining metal parts together through the application of appropriate welding techniques
- Measuring work pieces with straight edges to ensure correct specifications
- Constantly monitoring the fitting, burning, and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials
- Adjusted functional parts of equipment and control instruments
- Read, understand the following all Safe Work Practices and Procedures for welding machinery and equipment
- Inclusive
FIRSTCLASS WELDER
JGC Philippines
Madrigal, Ayala Alabang, Muntinlupa City, Philippines
08.2006 - 09.2006
- Rio Tuba, Bataraza, Palawan
- Contact Number : +63 2 876 6000
FIRSTCLASS WELDER
Nikkeru Plant Maintenance Sulotion Inc
, Philippines
07.2006 - 08.2006
- Shutdown Project in Taganito, Claver, Surigao Del Norte
Welder S/S
Daewoo E
Seoul, Korea
05.2005 - 07.2006
- Full welding of Carbon steel pipes sizes from ¾” to unlimited sizes, Stainless steel pipes from ¾” to unlimited sizes all with 100% x - ray
- Full welding of pipe supports and structures
- Ensure the clean weld joint to obtain smooth look
- Maintain disc grinder and perform all cleaning and grinding of metals
- Analyze speed and length of welding arc for all welding process
- I ensure compliance with safety protocols by wearing protective gloves, masks and boots
- I also adhere to health/ safety guidelines and procedures to ensure a risk-free working environment
- I usually operate manual or semi- automatic welding equipment to join metal parts
- I monitor equipment operation to ensure temperature conditions are optimal
- I work full-time and often must work overtime
- I can work up to 10 hours a day if needed
- Site ID PHL 4550)
- Project Assigned : LNG Project, Papua New Guinea EPC 3
- Contact Number : +82 61 755 5421
- Contact Person : H.S
- Bang
Welding Department Officer
JGC Philippines
Madrigal, Ayala Alabang, Muntinlupa City, Philippines
02.2006 - 03.2006
- Duties & Responsibilities:
- Full welding of Carbon steel pipes sizes from ¾” to unlimited sizes, Stainless steel pipes from ¾” to unlimited sizes all with 100% x - ray
- Full welding of pipe supports and structures
- I carry out complex calculations to determine the dimension and configuration of a welding project
- I was able to perform welding operations under extreme conditions such as inclement weather and limited workspace
- I was able to operate & utilize a range of power and hand tools in carrying out welding activities
- I utilize braces and clamps in aligning metal components for welding
- Removing rough spots or loose metal from work pieces
- As a part of our work description, we lest and inspect welded surfaces to identity and possible flaws
- Monitor all welding processes and ensure absence of any shrinkage and distortion to materials
- Evaluate finished products and perform quality checks on products
- Inclusive
Welder
Sungchang Heavy Industries Co., Ltd
01.2006 - 02.2006
- Project Assigned : EMS Project Y2012 Shutdown Activities EMS Project Y2012 Change Order – Investment Work
- Contact Number : +63 2 876 6000
- Contact Person : Lolita C
- Faller, (Manager Human Resources Department)
- Duties & Responsibilities:
- Full welding of Carbon steel pipes sizes from ¾” to unlimited sizes, Stainless steel pipes from ¾” to unlimited sizes all with 100% x - ray
- Full welding of pipe supports and structures
- A skilled tradesman who joins metal together or fills and repair holes on metal construction through the use of intense heat and gas
- Mainly join metals together by heating their surfaces and joining them together with pressure and it used in everything
- I monitor equipment operation to ensure temperature conditions are optimal
- Constructing and repairing various metal parts by welding the together
- Welding components in all positions
- Administer all welding activities such as riveting and welding small parts and finished products
- I also wear special mask to prevent flash burns which are like and ocular sunburn
- Special care is taken to prevent overheating of the metal leads to warping, distortion, shrinkage or expansion
- Assigned : Marafiq STG 5 & 6
Tig Welder
JGC Philippines
, Saudi Arabia
10.2005 - 12.2005
- Contact Number : +966-889-4886
- Contact Person :, Responsibilities:
- Assist fit up and full welding of tubing and bundle in boiler #5 and #6
- GTAW crome1
- Assist fit up and full welding of external pipe line of boiler 1" to 10" diameter S/S GTAW and 1" to 18" diameter C/S GTAW/SMAW
- Assist Iron Worker for fit up and full welding of tube covers, membrane insulation pin
- Analyzing and understanding the design prior to welding
- Understanding the properties and qualities of the types of metal that will be used during construction
- Join thin metals of varying compositions by operating specialized hand and power tools
- Regulate gas flow and pressure by turning gas cylinder gauges or valves
- I maintain the machinery and equipment they work with
- I fabricate and put together metal parts
- I do this through the use of various machines that create intense heat to
- Determining the necessary tools and techniques to weld the metal at hand
- Following safety procedures and protocols to the letter in order to avoid health risks and hazards
- Inclusive dates, Coral Bay Nickel Mining Corporation Project
Pipe Fitter / Welder
C.A.T. International Qatar W.L.L
Doha, Qatar
01.2005 - 12.2005
- Contact Number : +974 483 9242
- Contact Person, Felix A
- Gaid, Supervisor, & Responsibilities:
- Install and verify operation of high pressure steel gas pipe and fittings and fabricate install steel fittings on water/ gas mains
- Measure pipe routings and fabricate them to fit existing in- line piping systems
- Plan and lay out sequence of installation procedures to avoid obstruction in pipe laying and welding activities
- Full welding of inlet manifold and branches carbon steel at all size 6 inches up to 24 inch SCH 25mm to 93mm heavy wall filler ER70s – 6 route pass and hot pass E7018 filling
- Copping with pre-heating 130’c to 250’c and all joint of pipes are with 100% of x-ray quality
- Assign in fabrication shop and field: Full welding of pipe and support
- Attached pipes to walls, structures and fixtures, such as radiator or Tanks, using brackets, clamps, tools or welding equipment
- Determine the appropriate welding equipment or method based on requirements
- Adjust flames, gauges and flames to ensure appropriate handling of compressed gas or water pressure
- Test and inspect welded surfaces and structure to discover flaws.
GTAW/SMAW Welder CS / Pipe Fitter, Site Maintenance Manager
Rio Tuba, PSN, Pilipinas Shell Petroleum Corporation Inc
Bataraza, Palawan, Philippines
02.2005 - 08.2005
- Contact Number : +63 2 876 6000
- Contact Person : Oliverio R
- Siriban Jr., :
- Lay - out, fit and fabricate metal components to assemble structural forms, such as machinery frames, bridge parts, and pressure vessels, using knowledge of welding techniques, metallurgy, and engineering requirements
- Knowledge of standards welding safety procedures and protocol
- Knowledge of metallurgical properties of commonly used metal
- Assign in fabrication shop and field
- Ability to use basic welding equipment and engage in welding and cutting processes
- Full welding of pipe and support, grinding and cutting
- I also responsible for fixing structural repairs and ensuring that welding machinery and equipment are in great shape
- Preheating pipes and work pieces using hand torch or heating furnace
- Qualified to weld on different units for repair and complete welding either shop fabrication
- Strong analytical thinking and problem solving skills.
Pipe Welder
Arabian Bemco Contracting Co. Ltd
, Jeddah, S.A.
09.2004 - 10.2004
- Contact Number : +966 02 669 5851
- Contact Person : Mohammad Marini, Manager, & Responsibilities
- Study schematics, diagrams and blueprints to determine layout pipes and device welding plans
- Will be required to possess knowledge of the tools and equipment that is required to work at this position
- Measure pipe routings and fabricate them to fit existing in- line piping system
- Full welding of carbon steel at all size ½” to 14” sch 40 – 160 using filler metal ER 70s – 6 for route pass to hot pass and E7016 for filling capping
- Assign in fabrication shop and field: Full welding of pipe and support
- Assembles, install and maintain pipes for various system and projects
- Assigned to complete welds on pipes by following strict standards and procedure along with ensuring the hangers, valves, support structure s are properly installed and maintained
- Thread pipes using threading machines and assemble and install a variety of metal and nonmetal pipes and fitting using the threading method
- Plan and layout sequence of installation procedures to avoid obstruction in pipe laying and welding activities.
Mechanical Fitter
JGC Philippines
Madrigal, Ayala Alabang, Muntinlupa City, Philippines
08.2004 - 09.2004
- Contact Number : +63 2 876 6000
- Contact Person : Ronaldo C
- Guico
- Duties & Responsibilities:
- Fabricate and alters special construction equipment; design; lay out, repairs or fabricate with or wit out blue prints
- Assisted in welding operations and pipe fitting including grinding and buffing
- Operation of various power tools
- Ability to perform extensive manual labor in a wide range of weather conditions
- A variety of metal work ranging from small items to construction equipment to ornamental iron works; cuts, fits and weld metal using gas and electric welding equipment
- Is in charge doing inventory and maintains work records to ensure that no machine is mixed up with the other
- Is in charge of training people and employees on the safety practices necessary to be able to fix mechanical problems
- Resolve operational or technical equipment to minimize manufacturing interruptions resulting from equipment breakdown or failures
- Maintain a safe and clean work environment by being attentive and responsive to all rules and commands
- Performed maintenance on all equipment.
Arc Welder, Project Supervisor
J. Chavez Construction & General
Batangas City
05.2004 - 06.2004
- Contact Number : +63 43 722 0616
- Contact Person : Eligio D
- Rubia, Managed and maintained grain machinery
- Installed and inspected new motors on machinery when required
- Measured work pieces and operated welding machine
- Connects cables from welding unit to obtain amperage, voltage, slope and pulse as specified by welding technician
- Starts power supply to produce electric current
- I worked either by hand or machine
- It is most common method of welding in which an arc of electric current combines two metal pieces with a special welding rod
- Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edge s of work piece
- Welds in flat, horizontal, vertical or over head positions
- Duties performed were spray arcing, flux core, metal core and short arcing with fitter duties on trains and cotton pickers
- Examines weld for bead size and other specifications
- Clean and degrease weld joints and work piece efficiently.
88 Mica
, Qld
BOILERMAKER/WELDER
Queensland Steel Fabrication
, Qld
- Contact Number : 0407661629
- Contact Person : Shane Heit, Welding of different kind of metals using MIG and TIG Welding, assemble and fabricate
- Welding various types of metal including Carbon Steel Pipe, Stainless pipe and Copper nickel with different percentage of chrome using GTAW + MMAW process with almost 100% Radiographic Test
- Full welding of big bore pipe ranging from 300mm diameter pipe up to 500 diameter pipes using GTAW + FCAW and SMAW process with almost 100% UT
- Also manage to weld Pipe support, Plates, Angle Bar and other related works using MIG/ FCAW and SMAW process
- Administer various components and perform welding of clamps, holding and bolts according to specifications
- Produce metal products according to costumer or employer specifications
- Perform welding from various departments with help of welding torches and arcs
- Manage work with help of manual welding machines and melt metals for various processes
- Perform full welding assembly skills in different size of pipe with 100% RT
- Follow safety procedure and wear Proper protective equipment (PPE) and aware to every hazard of every job
- Inclusive Date : January 29, 2012, up to 2021of January
- Company, : 88 Mica St Carole Park
BOILERMAKER/WELDER
88 Mica St
Carole Park, Qld
- Contact Number : 0424418554
- Contact Person : GARRY JESBERG
- Duties, Responsibilities
- Welding of different kind of metals using MIG and TIG Welding, assemble and fabricate
- Welding various types of metal including Carbon Steel Pipe, Stainless pipe and Copper nickel with different percentage of chrome using GTAW + MMAW process with almost 100% Radiographic Test
- Full welding of big bore pipe ranging from 300mm diameter pipe up to 500 diameter pipes using GTAW + FCAW and SMAW process with almost 100% UT
- Also manage to weld Pipe support, Plates, Angle Bar and other related works using MIG/ FCAW and SMAW process
- Administer various components and perform welding of clamps, holding and bolts according to specifications
- Produce metal products according to costumer or employer specifications
- Perform welding from various departments with help of welding torches and arcs
- Manage work with help of manual welding machines and melt metals for various processes
- Perform full welding assembly skills in different size of pipe with 100% RT
- Follow safety procedure and wear Proper protective equipment (PPE) and aware to every hazard of every job.
BOILERMAKER/WELDER
FABTECH, Field
- South Terrace Wing Field South Australia
- Project Assigned : Fabrication Shop
- Location, Contact Number : 1300 664 777
- Duties and Responsibilities:
- Welding of plastic, geo & membrane liners plastic installer
- Analyze blueprints
- Specification, sketches, work orders and material safety data sheets to plan lay out, assembly and welding operations
- Performs close tolerance plastic layout to meet print specifications
- Cleans and prepares parts before welding
- Set up and operates thermal welding equipment to weld, repair, join or fabricate parts by working with blueprints, sketches or verbal orders
- Examine parts for defects and measure parts to ensure conformance with specifications
- Performs seam finishing, component fit-up, drilling and tapping and other minor machining functions
- Assists in training less experienced employees in set up and quality production standards
- Moves material with appropriate equipment throughout the work area as needed
- Completes standard job sheets for each job
- Performs other job-related duties as assigned.
Welder
C/S & S/S
Welder
Tabangao Shell Refinery
Batangas City, Philippines
- Contact Number : +63 43 723 0720
Education
Two Year Electronics Computer Technology Course -
University of Sto. Thomas
Legaspi City, Philippines10.2004
University of Sto Thomas
Legaspi City, Philippines03.2002
Skills
- Boilermaker / Welder
- Forklift License
- Coal board Medical
- EWP
- Working at HEIGHTS
- Confined Space
- Gas test
- White Card
Certification
- License to Perform High Risk, 0003354319, 03/28/17, 03/28/27
- Work Safely in the Construction Industry, CPCCOHS1001A, 09/12/14
- Certificate III in Engineering – Fabrication Trade (BOILERMAKING/WELDING), MEM30305
- Gas Test Atmospheres, MSMWHS217, 14952694-9955670
- Confined Space, RIIWSH202E
- Working Safely at Heights, RIIWHS204E
- Standard 11 / Coalboard Medical
- Fire Safety Training
- BMA Inducted / Rio Tinto Inducted
Positionappliedfor
BOILERMAKER/ WELDER
Awards
JGC Philippines, 5,000.000 safe man hour without LTA, 11/30/12, Rio Tuba, Bataraza, Palawan
Training
Brown & Root Industrial Services Philippines, Inc., PSPC Tabangao Refinery, Batangas City, Philippines, Welding Technology Completed 320 Hours of on the Job Training, 09/16/03 to 12/21/03
Personal Qualifications
National Certificate II in Shielded Metal Arc Welding, 06/28/17, 06/28/19, 14040102010542
Personal Information
- Height: 5'6
- Weight: 60kgs
- Passport Number: PA8726198
- Citizenship: Filipino
- Gender: Male
- Marital Status: Married
- Visa Status: Sub Class 457
Timeline
Boilermaker
TCW-BHP
09.2024 - 10.2024
Boilermaker
UGL
02.2024 - 05.2024
Boilermaker
Monodelphous
11.2023 - Current
OZQ Engineering
01.2021 - 06.2024
Boilermaker
OZQ
01.2012 - 06.2024
BOILERMAKER/WELDER
Transafe Engineering Pty. Ltd
09.2006 - 10.2011
FIRSTCLASS WELDER
JGC Philippines
08.2006 - 09.2006
FIRSTCLASS WELDER
Nikkeru Plant Maintenance Sulotion Inc
07.2006 - 08.2006
Welding Department Officer
JGC Philippines
02.2006 - 03.2006
Welder
Sungchang Heavy Industries Co., Ltd
01.2006 - 02.2006
Tig Welder
JGC Philippines
10.2005 - 12.2005
Welder S/S
Daewoo E
05.2005 - 07.2006
GTAW/SMAW Welder CS / Pipe Fitter, Site Maintenance Manager
Rio Tuba, PSN, Pilipinas Shell Petroleum Corporation Inc
02.2005 - 08.2005
Pipe Fitter / Welder
C.A.T. International Qatar W.L.L
01.2005 - 12.2005
Pipe Welder
Arabian Bemco Contracting Co. Ltd
09.2004 - 10.2004
Mechanical Fitter
JGC Philippines
08.2004 - 09.2004
Arc Welder, Project Supervisor
J. Chavez Construction & General
05.2004 - 06.2004
88 Mica
BOILERMAKER/WELDER
Queensland Steel Fabrication
BOILERMAKER/WELDER
88 Mica St
BOILERMAKER/WELDER
FABTECH, Field
Welder
C/S & S/S
Welder
Tabangao Shell Refinery
Two Year Electronics Computer Technology Course -
University of Sto. Thomas
University of Sto Thomas