Mark Cervantes

• Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
• Enhanced energy efficiency by recommending and installing upgraded electrical components in residential and commercial properties.
• Provided exceptional customer service through clear communication, accurate estimates, and timely project completion.
• Reduced downtime for clients by quickly diagnosing and repairing complex electrical issues.
• Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
• Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Troubleshot and repaired malfunctioning systems and components.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.

•Running cable

•termination of all size cable communication and power

•reading and understanding drawings

•reporting to supervisor and leading hands

•meeting deadlines

•ladder work

•Steel conduit work

•following all safety procedures

• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Inspected electrical equipment to assure it was operating correctly.
• Installed new equipment and modified existing equipment.
• Conducted preventive maintenance on equipment.
• Reviewed blueprints and schematics to properly place wires, fixtures and appliances.
• Responded to fault and wiring issues, identifying hazards and problems.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.

• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Proved successful working within tight deadlines and fast-paced atmosphere.
• Led projects and analyzed data to identify opportunities for improvement.
• Learned new skills and applied to daily tasks to improve efficiency and productivity.
• Created plans and communicated deadlines to complete projects on time.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Inspected worksites and installations to verify compliance with state safety codes.
• Scheduled and supervised splicing or termination of cables in color-code order.
• Repaired, replaced and cleaned equipment and components such as circuit breakers, brushes and commutators.
• Consulted manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and determine optimum equipment functioning.
• Exceeded goals through effective task prioritization and great work ethic.
• Collaborated with team members to achieve target results.

• Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
• Created, aligned and optimized electrical instrumentation and testing equipment.
• Evaluated installed electrical equipment and systems to isolate faults and implement corrective actions.
• Rethought plans for each design to devise lateral options filling unique market gaps.
• Reviewed engineering design proposals and completed drawings to determine feasibility of each plan and assess conformance with both safety and sound engineering practices standards.
• Identified and resolved equipment malfunctions working with manufacturers or field representatives as necessary to procure replacement parts.
• Offered friendly and efficient service to all customers, handled challenging situations with ease.
• Carried out day-day-day duties accurately and efficiently.
• Completed minor preventative maintenance and mechanical repairs on equipment.
• Identified issues, analyzed information and provided solutions to problems.
• Successfully maintain clean, valid driver's license and access to reliable transportation.

• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
• Wrote authoritative engineering specifications to clear up avoid confusing in field regarding design parameters or functions.
• Used variety of testing devices to identify electrical problems.
• Read blueprints and technical diagrams.
• Prepared and assembled conduits and connected wiring.
• Proved successful working within tight deadlines and fast-paced atmosphere.
• Used coordination and planning skills to achieve results according to schedule.
• Carried out day-day-day duties accurately and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.

• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Effectively worked with multi-craft team; providing wiring installation, preventive maintenance and testing of equipment.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
• Updated service record files on equipment drawings and history.
• Maintained detailed documentation through logging of support cases, e-mail and knowledge base articles for client and internal use.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.

• Gathered parts supplies and tools in preparation for each workday or new job
• Measured and cut required supplies such as wire and conduit
• Reviewed electrical schematics and plans and followed according to specifications
• Assisted with electrical installations, including lighting and smoke detectors
• Read blueprints and technical diagrams
• Prepared and assembled conduits and connected wiring
• Installed and maintained wiring, control and lighting systems
• Used variety of testing devices to identify electrical problems
• Performed electrical system installation of conduit, wire, power distribution and motor controls
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers
• Updated service record files on equipment drawings and history
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors
• Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.

• Prepared and assembled conduits and connected wiring
• Used variety of testing devices to identify electrical problems
• Read blueprints and technical diagrams
• Installed and maintained wiring, control and lighting systems
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work
• Consulted with supervisor electrician regarding likely risks associated with assigned job
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors
• Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts
• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes
• Performed electrical system installation of conduit, wire, power distribution and motor controls
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Consulted with supervisor electrician regarding likely risks associated with assigned job.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.

• Prepared sketches and blueprints
• Repaired and replaced equipment, electrical wiring and fixtures
• Connected wires to circuit breakers, transformers, and other components
• Installed, maintained and repaired electrical wiring, controls and lighting systems
• Installed, tested and calibrated commercial electrical equipment to meet use demands
• Responsible for wide variety of duties including, pipe fitting, painting, carpentry, electrical repair, installation, building repair
• Accurately read, understood, and carried out written instructions
• Prepared and assembled conduits and connected wiring
• Used variety of testing devices to identify electrical problems
• Read blueprints and technical diagrams
• Installed and maintained wiring, control and lighting systems
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements
• Used hoists and cranes to lift work pieces to machine
• Attended monthly safety meetings to ensure machine operation safety
• Steel conduit work ie bending and installing conduit
• Commissioning
• Terminations on electrical equipment
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Consulted with supervisor electrician regarding likely risks associated with assigned job.

• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Effectively worked with multi-craft team; providing wiring installation, preventive maintenance and testing of equipment.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Consulted with supervisor electrician regarding likely risks associated with assigned job.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.

• Constructed scaffolding for confined spaces such as furnaces
• Built hung, tube and clip and modular scaffolds
• Worked around live machinery and ongoing operations to accomplish scaffolding needs
• Performed daily department Layered Process Audits to ensure proactive control over the automobile manufacturing process
• Used hand tools to change worn cutting tools
• Performed basic machine set up

• Operated at heights of up to 100+ feet
• Lead and guided a team of 3 scaffolders
• Built hung, tube and clip and modular scaffolds
• Constructed scaffolding for confined spaces such as furnaces
• Oversaw inventory, equipment maintenance and bay cleaning
• Accurately estimated time and materials costs for projects
• Unpacked and assembled all new merchandise using variety of power tools

• Performed preventive maintenance on equipment during scheduled downtime
• Operated all packing and labeling equipment
• Monitored all objectives and communicated with various teams regarding performance
• Performed electrical and mechanical troubleshooting on equipment
• Planned, scheduled and delegated daily work
• Monitored machine operation and diagnosed malfunctions
• Tested products or subassemblies for functionality or quality
• Read and followed standard operating procedures
• Employed different welding techniques to assemble parts and components
• Worked on ball mill
• Flotation
• Tanks
• Gold room
• Crusher

• Maintained cleanliness and organization of work areas
• Adhered to work site safety protocols and reported potential hazards
• Demonstrated knowledge of safety protocols and industry best practices
• Assisted with electrical installations, including lighting and smoke detectors
• Gathered parts supplies and tools in preparation for each workday or new job
• Reviewed electrical schematics and plans and followed according to specifications
• Tested wiring and other system parts for electrical flow and function
• Maintained work areas in a clean, neat and organized fashion
• Repaired existing systems and replaced malfunctioning parts