Summary
Overview
Work History
Education
Skills
Timeline
Generic

Matthew Sinclair

Emu Plains,NSW

Summary

Precision-driven Tiler known for completing projects with high productivity and efficiency. Specialize in custom tile design, accurate cutting techniques, and waterproofing solutions, ensuring durability and aesthetic appeal in every installation. Excel in time management, problem-solving, and teamwork, leveraging these skills to meet tight deadlines and collaborate effectively on large-scale projects.

Overview

17
17
years of professional experience

Work History

Tiler - Small Business Owner

Sculpt Tiling
Emu Plains, NSW
06.2024 - Current
  • Prepared surfaces for tiling by removing old tiles, plaster and other materials.
  • Measured walls, floors and ceilings to ensure accurate tile placement.
  • Cut ceramic, porcelain, marble and granite tiles using wet saws, manual tile cutters and electric tile nippers.
  • Applied adhesive or mortar on the surface before laying down tiles.
  • Laid out tiles according to design specifications in a neat pattern.
  • Installed backer boards and waterproofing membranes as necessary.
  • Grouted joints between tiles with appropriate grout material.
  • Sealed finished surfaces with sealant or grout release agents.
  • Repaired defective tiles using caulking compounds and epoxy fillers.
  • Inspected installed tiling work for accuracy of fitment and quality of finish.
  • Provided guidance to apprentices on proper techniques for cutting and installing tiles.
  • Cleaned up job sites after completion of tiling works including disposal of waste materials.
  • Calculated quantities of materials needed for each project based on measurements taken.
  • Maintained inventory records of supplies such as tile spacers, adhesives, grouts.
  • Checked if all tools used were in working condition prior to start of job tasks.
  • Coordinated with clients regarding their preferences in terms of color, style.
  • Performed minor repairs such as replacing broken or cracked tiles.
  • Assisted in loading and unloading materials from delivery vehicles at job sites.
  • Ensured compliance with safety regulations while carrying out tiling works.
  • Adhered to industry standards when mixing mortars or adhesives for installation purposes.
  • Prepared tiling surfaces using waterproofing materials and lath.
  • Measured, cut and shaped tiles and marble to size.
  • Cleaned and leveled surface areas and removed excess grout.
  • Produced high-quality work with power and hand tools and accurate calculations of distances and surface areas.
  • Used levels, squares and straightedges to align and straighten tiles.
  • Sealed finished surfaces to render grout water- and stain-resistant.
  • Used spacers between tiles and marble to align distance before grout application.
  • Developed business plans and strategies to grow small business.
  • Created budgets and monitored expenses to stay within budget limits.
  • Negotiated contracts with vendors, suppliers, and customers.
  • Analyzed market trends to inform product offerings and pricing decisions.

Wall and Floor Tiler

Belcastro Tiling
Baulkham Hills, NSW
03.2012 - 06.2013
  • Measured floor area to determine tile layout and quantity of materials needed.
  • Cut tiles to fit around obstacles, such as pipes or fixtures, using hand and power cutting tools.
  • Applied thin-set mortar on floors with trowel, spread grout over joints between tiles with rubber float and wiped off excess grout with sponge.
  • Laid out full tiles at beginning of each row for balanced appearance.
  • Inspected surfaces for defects prior to installation of tile.
  • Prepared subfloors for installation by cleaning, removing debris and checking moisture content of concrete substrates.
  • Filled joints between tiles with grout according to specifications, using trowel and rubber float.
  • Selected appropriate type of tile based on application requirements.
  • Installed tile in areas such as showers, countertops, backsplashes and walls.
  • Cleaned finished surface after installation by scrubbing with detergent solution or steam cleaner.
  • Grouted wall and floor installations using epoxy or cement-based products.
  • Applied sealants to protect installed surfaces from water damage or staining.
  • Repaired damaged tiles using adhesives or replaced them if necessary.
  • Utilized a variety of specialized tools including levels, spacers, cutters and grinders.
  • Inspected completed work for quality assurance purposes.
  • Maintained cleanliness in the job site throughout the duration of the project.
  • Adhered to safety regulations while handling hazardous materials such as glues or sealants.
  • Kept records of material used for each project according to company guidelines.
  • Provided technical support to customers regarding proper maintenance procedures for their newly installed tile surfaces.

Apprentice Tiler

MDI Tiling
Kellyville, NSW
06.2009 - 01.2012
  • Prepared surfaces for tiling by removing old tiles and smoothing, cleaning, and leveling the surface.
  • Measured and marked areas to be tiled in order to calculate materials needed.
  • Cut ceramic tile with a wet saw or tile cutter according to measurements.
  • Applied thin-set mortar adhesive to back of tile using a notched trowel.
  • Layed out floor tiles in desired pattern and cut pieces as required for fit.
  • Grouted joints between tiles using grout float and sponged off excess grout.
  • Sealed all grout lines with sealer according to manufacturer's specifications.
  • Installed wall tile on walls, countertops, showers, tubs, and other surfaces.
  • Used spacers to ensure even spacing between tiles during installation process.
  • Checked levelness of installed tiles with spirit level and adjusted as necessary.
  • Replaced cracked or broken tiles when necessary.
  • Ensured safety standards were met at all times while working on site.
  • Repaired existing damaged tile installations when requested.
  • Assisted senior tilers with complex tasks such as intricate designs or patterns.
  • Provided customers with advice on selection of materials like tile types, colors.
  • Followed instructions from supervisor regarding job requirements.
  • Kept up-to-date records of daily activities including progress reports and time sheets.
  • Cut tiles and marble to project specifications by using power wet saws and tile cutters.
  • Followed specific project requirements when preparing grout and cleaning solutions.
  • Adhered to company policies and procedures related to health and safety regulations.
  • Maintained tools and equipment in good working condition.

Lawn Maintenance Technician

Fresh Living
Pendle Hill, NSW
11.2007 - 06.2009
  • Maintained and operated lawn mowing, edging, trimming, and pruning equipment.
  • Inspected lawns for weeds, insects, diseases, and other problems.
  • Applied fertilizers to turf areas according to established schedules.
  • Performed regular maintenance on tools and equipment used for lawn care.
  • Removed debris from lawns and walkways as needed.
  • Collected leaves and brush from turf areas using blowers or rakes.
  • Trimmed trees, shrubs, hedges, and ornamental plants as required.
  • Installed mulch beds around trees and flower beds as needed.
  • Ensured that all safety protocols were followed while performing duties.
  • Coordinated with customers regarding their desired lawn care services.
  • Responded promptly to customer inquiries regarding services offered.
  • Conducted yard maintenance tasks according to contract and to meet customer satisfaction.
  • Used hand-held tools to maintain green spaces.
  • Cleared pathways of overgrowth, debris, and snow to reduce hazards.
  • Maintained proper use of ergonomic practices, personal protective and safety equipment.
  • Aereated lawns to improve oxygen circulation within soil, promoting healthier grass growth.
  • Followed environmental and safety regulations in the application of lawn care products.
  • Managed time efficiently to complete scheduled appointments and maintain productivity.

Education

Certificare 3 - Wall And Floor Tiling

Macquarie Fields College
Macquarie Fields, NSW
11-2011

Year 10 School Certificate -

Pendle Hill High School
Pendle Hill, NSW
01-2003

Skills

  • Terrazzo Installation
  • Remodels
  • Marble installation
  • Sealant Application
  • Tool Maintenance
  • Floor installation
  • Layout planning
  • Tile and grout care
  • Project Estimation
  • Shower tiling
  • Surface Preparation
  • Demolitions
  • Grout application
  • Client Communication
  • Pattern creation
  • Waterproofing knowledge
  • Granite installation
  • Customized installations
  • Weed control
  • Garden maintenance
  • Hand-tool proficiency
  • Pest Management
  • Leaf removal
  • Power Tool Operation
  • Fertilizer Application
  • Customer Service
  • Turf management
  • Lawn Care
  • Staff Management
  • Grounds Maintenance
  • Jobsite Safety
  • Residential Landscaping
  • Machine Safety Practices
  • Gardening knowledge
  • Construction management
  • Physically Fit
  • Landscaping plans
  • Trimming and weeding
  • Flexible and Adaptable
  • Using hand tools
  • Project Scheduling
  • Strong Work Ethic
  • Exceptional communication

Timeline

Tiler - Small Business Owner

Sculpt Tiling
06.2024 - Current

Wall and Floor Tiler

Belcastro Tiling
03.2012 - 06.2013

Apprentice Tiler

MDI Tiling
06.2009 - 01.2012

Lawn Maintenance Technician

Fresh Living
11.2007 - 06.2009

Certificare 3 - Wall And Floor Tiling

Macquarie Fields College

Year 10 School Certificate -

Pendle Hill High School

Similar Profiles

CREATE PROFILE
Matthew Sinclair