Michael Paterson

At Brisbane airport, I conduct weekly and six monthly maintenance maintaining lighting systems, testing integrity of runway and taxiway circuits, maintaining the control side of plc's adding to them and assisting in upgrades such as adding cards for the programmers and wiring them, etc. In my current role at Alstef, I do weekly, 3 monthly and yearly maintenance of passenger conveyor lines and check ins, maintaining motors, control panels, photo eyes and contactors, vsd's etc.

Before being taken over by Alstef, working for BAC previously, as part of a team , I was maintaining aerobridges which dock to the aircraft. I was part of the first response team. A recent example was an aerobridge had broken cores on a cable which supplied critical control voltage to the bridge. The solution put forward was to remove the bridge from service for four days and replace cable carriers and all cables. I was on night duty, tested the integrity of all cables and found 2 cables with broken cores. Solution 1 was to use the cores across both cables as a temporary measure. The solution did not initially work as the cable was intermittent. I decided to replace as a temporary fix the first 15 metres of cable with staggered joints and heat shrink. This indeed made the bridge serviceable, the bridge was returned to service. The client was happy (BAC) and the repair proved reliable.

• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Inspected electrical equipment to assure it was operating correctly.
• Installed new equipment and modified existing equipment.
• Conducted preventive maintenance on equipment.
• Responded to fault and wiring issues, identifying hazards and problems.
• Implemented advanced diagnostic tools to resolve customer complaints.
• Used oscilloscopes, voltmeters and ohmmeters to test electrical systems.
• Reviewed blueprints and schematics to properly place wires, fixtures and appliances.
• Applied functional knowledge and troubleshooting abilities to isolate and diagnose diverse faults.
• Removed and replaced malfunctioning and worn parts to maximize system longevity and performance.
• Installed, tested and calibrated commercial electrical equipment to meet use demands.
• Organized and managed smooth preventive maintenance tasks such as evaluating part functionality, cleaning components and removing old seals and gaskets.
• Located and addressed electrical connection issues such as frayed wires and worn insulation to prevent larger problems.
• Efficiently installed electrical systems and components with careful analysis of technical schematics and specifications.
• Identified and corrected defects to bring completed products in line with tolerances.
• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Excellent communication skills, both verbal and written.
• Passionate about learning and committed to continual improvement.
• Proved successful working within tight deadlines and a fast-paced environment.
• Strengthened communication skills through regular interactions with others.
• Organized and detail-oriented with a strong work ethic.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Paid attention to detail while completing assignments.
• Worked flexible hours across night, weekend and holiday shifts.
• Developed and maintained courteous and effective working relationships.
• Identified issues, analyzed information and provided solutions to problems.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.

• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
• Understood and used proper tools and equipment to install and maintain electrical systems.
• Pulled wire through conduits and through holes in walls and floors.
• Organized materials and tools in to maintain clean and neat work areas.
• Followed all safety procedures and guidelines to promote safety while working on electrical systems.
• Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement, or repair.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Read and interpreted drawings to provide wiring layouts for new installations
• Read and interpreted blueprints and electrical schematics to determine layout of electrical systems.
• Connected wires to circuit breakers, transformers and other components to create working electrical systems.
• Learned and followed latest electrical codes and regulations to deliver compliant electrical systems.
• Identified and studied electrical problems to determine correct solutions.
• Inspected electrical systems, equipment and components to identify hazards and defects.
• Completed full apprenticeship program to become qualified Electrician.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Troubleshot and repaired malfunctioning systems and components.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Connected wires to circuit breakers, transformers or other components.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Followed state and local building regulations based on National Electrical Code.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Examined electrical units for loose connections and broken insulation.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Installed ground leads and connected power cables to equipment.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Studied building schematics to determine location of wiring and equipment.
• Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
• Installed 120/208 volt systems and 347/600 volt systems.
• Managed business report generation, recordkeeping and supply ordering.
• Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
• Instructed customers on proper use and safety of electrical systems and equipment.