Summary
Overview
Work History
Education
Skills
Timeline
Generic

Mutale Makungu

Perth, East Cannington,Western Australia

Summary

I'm a fully qualified Heavy Equipment Repair Mechanic with an apprentice background in diesel mechanic with over 12 years of hands-on experience on Caterpillar, Liebherr, Volvo, Sandvik, Furukawa, Hitachi and Komatsu.

Overview

14
14
years of professional experience

Work History

Field Service Technician

XCMG (Autonomy and Assets Management Group)
Perth, Western Australia
08.2024 - Current
  • Assemble and maintain XCMG trucks(XDE 130 Electric Drive Dump Truck)
  • Prepare detailed reports documenting service activities performed on each job site.
  • Adjust functional parts of devices or control instruments according to specifications.
  • Inspect and tested mechanical products to locate defects or malfunctions.
  • Perform routine maintenance on machinery to ensure optimal performance.
  • Assemble according to clients specification.
  • Replace faulty parts or components following diagrams or blueprints.
  • Complete all necessary paperwork for service calls in a timely manner.
  • Conduct regular inspections of work sites for hazardous conditions or potential safety risks.
  • Keep up-to-date knowledge of industry trends, regulations, safety standards.
  • Performe on-site installation, routine maintenance and minor repairs to systems.
  • Operate hand tools and power equipment according to corporate safety procedures.
  • Drive and maintain company vehicle, keeping in peak condition.
  • Minimize customer callbacks and equipment failure by reviewing job upon completion.
  • Observe field safety protocols to prevent injuries and accidents.

Rebuild Fitter

BTP (Autonomy and Assets Management Group)
Perth, Western Australia
04.2024 - 08.2024
  • Assemble and install a variety of mechanical components, including Engine, Transmissions, Final Drives, Pumps, Radiators, Motors, Fans, Cylinders, Compressors, etc on Caterpillar machines.
  • Performe preventative maintenance on equipment to ensure proper operation.
  • Inspect machines and identified any potential issues or malfunctions.
  • Adjusted functional parts of mechanical devices as needed.
  • Tested newly installed systems for functionality prior to use.
  • Used hand tools such as hammers, wrenches and screwdrivers to complete tasks efficiently.
  • Cleaned machine parts with solvents before assembly or installation.
  • Ensured all safety protocols were followed when handling hazardous materials.
  • Aligned machines properly for efficient operation.
  • Provided technical support to colleagues when required.
  • Ordered spare parts from vendors when necessary.
  • Carried out repairs on hydraulic systems as instructed by supervisor.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Adhered closely to safety protocols, applicable regulations and industry best practices.

HD Fitter

Iron Mine (Autonomy and Assets Management Group)
Perth, Goldfields , Western Australia
05.2023 - 04.2024
  • Assemble and install a variety of Mechanical and Electrical components to specification.
  • Perform preventative maintenance on equipment to ensure proper operation.
  • Inspect machines and identify any potential issues or malfunctions.
  • Aligned machines properly for efficient operation.
  • Repair and replaced defective parts to restore machinery to working order.
  • Adjust functional parts of mechanical devices as needed.
  • Test newly installed/ repaired components for functionality prior to use.
  • Calibrate/ adjust a range of systems and components in accordance with manufacturer specifications.
  • Perform routine maintenance checks on all tools used in the job.
  • Order spare parts from vendors when necessary.
  • Provide technical support to colleagues when required.
  • Maintain accurate records of work performed on each piece of equipment.
  • Clean machine and parts with solvents before assembly or installation.
  • Ensure all safety protocols were followed when handling hazardous materials.
  • The following are the machines I am working on: CATERPILLAR 777D and 777C trucks (Breakdowns, Troubleshooting, Services, Component change out and Preventive Maintenance), D9T and D10R dozer(Preventive Maintenance, Troubleshooting and Services) M14 and H 16 Graders(Troubleshooting, Preventive maintenance and Services). KOMATSU HD785-7 trucks (Services and Preventive Maintenance). PC2000, PC1250, PC850 Excavator.

Mechanic/Rebuild Technician

African Mining Services
Solwezi , Zambia
01.2021 - 05.2023
  • Performed preventive maintenance on heavy equipment and vehicles, including lubrication, oil changes, filter replacements and brake adjustments.
  • Diagnosed and troubleshot mechanical problems on a variety of heavy equipment and vehicles using electrical and hydraulic testing devices.
  • Installed new parts, components, accessories or attachments to existing heavy equipment and vehicles according to manufacturer's specifications.
  • Inspected finished repairs for accuracy prior to returning the unit back into service.
  • Maintained records of all repairs performed by documenting labor time codes, part numbers used and any other pertinent information in computer database system.
  • Utilized hoists and cranes to lift large objects off trucks or trailers safely during repairs.
  • Cleaned up work area after completing jobs in order to maintain a safe working environment.
  • Adhered strictly to safety regulations while operating power tools or lifting heavy objects.
  • Tested repaired machinery for proper performance prior to release into service.
  • Researched technical manuals for guidance when attempting difficult tasks.
  • The following are the machines I worked on: CATERPILLAR 785C trucks(RebuildandPreventiveMaintenance), LIEBHERR R9350, R9350E, R9250 and R9100 Excavators(Rebuild and Preventive Maintenance) MD6640 drills(Rebuild)

Drill Rebuild

African Mining Services
Solwezi , Zambia
02.2020 - 07.2020
  • Diagnosed mechanical problems.
  • Performed preventive maintenance services such as oil changes and tune-ups.
  • Inspected, serviced, and repaired various faults on different systems and components to manufacturers specifications.
  • Ensured safety protocols were followed while working on machines.
  • Organized tools and supplies neatly within the workspace for easy access during maintenance tasks.
  • Assisted fellow mechanics when necessary during complex repairs.
  • Adhered strictly to safety requirements when operating machinery or handling hazardous materials.
  • The following are the Drills I worked on; MD6640(Rebuild and Service)

Mechanic/Apprentice Mechanical Fitter

First Quantum Mining Ltd
Solwezi , Zambia
03.2011 - 01.2019
  • Maintained and repaired machinery and equipment in accordance with safety regulations.
  • Conducted regular inspections of mechanical systems to identify potential problems and develop strategies for repair or replacement.
  • Assembled and installed parts on machines, tools, and equipment using hand tools, power tools, fixtures, jigs, and templates.
  • Documented maintenance activities including repairs performed and spare parts used for future reference.
  • Repaired worn parts by grinding, filing, turning and replacing them when necessary.
  • Followed established health and safety procedures while working on equipment and machinery.
  • Replaced defective parts with new ones ensuring that they fit correctly into place.
  • Ensured that all work areas were kept clean at all times following 5S principles.
  • Operated hoists, cranes, forklifts safely when handling heavy objects .
  • Attended theoretical and practical classes
  • The following are the machines I worked on; VOLVO A40F and A40D dump trucks(Rebuild, Services, Field Work and Preventive Maintenance) CATERPILLAR D9T dozer(Services and Preventive Maintenance) 785C trucks(Services and Preventive Maintenance) LIEBHERR R9350 and R9250(Services and Preventive Maintenance)

Education

Heavy Equipment Repair Mechanics

Northern Technical College
Ndola, Copperbelt, Zambia
09.2013

Heavy Equipment Repair Technician

Northern Technical College
Ndola, Copperbelt, Zambia

Skills

  • Job Order Prioritization
  • Hand and Power Tools
  • Component Replacement
  • Job Site Setup
  • Task Prioritization
  • Attention to Detail
  • Equipment Testing

Timeline

Field Service Technician

XCMG (Autonomy and Assets Management Group)
08.2024 - Current

Rebuild Fitter

BTP (Autonomy and Assets Management Group)
04.2024 - 08.2024

HD Fitter

Iron Mine (Autonomy and Assets Management Group)
05.2023 - 04.2024

Mechanic/Rebuild Technician

African Mining Services
01.2021 - 05.2023

Drill Rebuild

African Mining Services
02.2020 - 07.2020

Mechanic/Apprentice Mechanical Fitter

First Quantum Mining Ltd
03.2011 - 01.2019

Heavy Equipment Repair Mechanics

Northern Technical College

Heavy Equipment Repair Technician

Northern Technical College

Similar Profiles

  • Sameer Narkar

    Sameer NarkarSameer Narkar

    Kitchen Helper at Ejadah Assets Management GroupKitchen Helper at Ejadah Assets Management Group

    View Profile
  • Janice Smith

    Janice SmithJanice Smith

    General Manager, Business Development at StarTrust Assets Management LLC.General Manager, Business Development at StarTrust Assets Management LLC.

    View Profile
  • Lu Wang

    Lu WangLu Wang

    Customer Service Representative at FS Cinda Assets ManagementCustomer Service Representative at FS Cinda Assets Management

    View Profile
Mutale Makungu