Robbie Nicholas Davis

I was employed as a handyman and skilled laborer at the Ensham coal mine site. My role was a mix between wash plant maintenance as a skilled labourer/rigger, and maintenance in the village accommodation and facilities.

• Performed general maintenance tasks including plumbing, electrical, and carpentry work.
• Conducted regular inspections to identify and address facility maintenance issues.
• Collaborated with team members to prioritize and complete repair requests efficiently.
• Responded promptly to emergency repair requests to minimize service disruptions.
• Maintained clean and organized workspaces to promote safety and efficiency.
• Repaired damaged doors by replacing hinges, locksets or frames when necessary.
• Painted interior rooms with desired colors according to customer specifications.
• Installed plumbing fixtures, including sinks, toilets, bathtubs and showers.
• Patched holes in ceilings and walls using spackling paste or joint compound.
• Assembled furniture from flat packs.
• Caulked cracks between baseboards and trim moldings to prevent dust accumulation.
• Maintained maintenance schedules and completed timely repairs.
• Maintained outdoor areas by mowing lawns, trimming hedges and removing debris.
• Repaired or replaced broken windows and window locks.
• Pressurized washed exterior surfaces of buildings to remove dirt and mold build up.
• Operated hand tools and power tools to make minor maintenance repairs and maintain grounds and walks.
• Identified problems during daily work inspections and addressed concerns.
• Repaired minor carpentry, electrical and plumbing issues to return equipment to functionality.
• Followed correct procedures for handling, transporting and disposing of new and recycled materials.
• Operated rigging equipment to safely lift and move heavy materials.
• Inspected rigging gear for wear, damage, and compliance with safety standards.
• Collaborated with crew members to plan lifting operations and sequences.
• Maintained clear communication using hand signals during rigging operations.
• Developed rigging plans based on site conditions and load specifications.
• Coordinated with supervisors to schedule maintenance for rigging equipment.
• Inspect rigging equipment for any visible damage or defects prior to use.
• Securely attach loads to rigging equipment using clamps, shackles, and other fasteners.
• Maintained open communication with crane and other equipment operators to smoothly transport loads.
• Conduct risk assessments before each performance or production in order to identify potential hazards associated with the use of lifting devices.
• Safely disassemble rigging equipment when no longer needed for a production or performance.
• Train new crew members on proper techniques for setting up and operating rigging systems safely.
• Follow manufacturer's instructions for maintenance and storage of rigging equipment.
• Perform regular checks on all cables and ropes used in order to ensure they meet safety standards.
• Determine appropriate load-bearing capacity of various types of rigging systems and components.
• Position stage scenery, lighting fixtures, props, and other objects with precision accuracy using hoists, pulleys, winches, lifts, and cranes.

• Company Overview: Zenith Workforce is a labour hire company supplying tier 1-3 builders with skilled labour for large commercial or high-rise construction projects.
• During my time with Zenith, I have spent most of my time on permanent hire to Tier One builders on the Sydney metro projects around the CBD.
• Tasks and duties with Zenith include the operation of material and personnel hoists, the operation of 11+m boom lifts, and the operation of forklifts up to 13-ton lifts.
• Basic site carpentry, including basic form work, building temporary ramps, decks, walls, and hoardings.
• small concrete pours, basic steel fixing, Peggy/nipper work, precision jackhammering, concrete grinding/patching, working at heights, confined space work, waterproofing, site housekeeping, safety maintenance, and site dewatering.
• Operated heavy machinery for site preparation and material handling.
• Followed safety protocols to maintain a secure job site environment.
• Collaborated with team members to complete construction tasks efficiently.
• Loaded and unloaded materials while ensuring proper storage and organization.
• Conducted inspections of tools and equipment for maintenance needs.
• Supported project leads in executing daily work plans and schedules.
• Trained new workers on safety practices and operational procedures.
• Utilized power tools such as saws, drills and sanders when necessary on projects.
• Cleaned job sites daily removing debris, dirt and hazardous materials safely.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Mixed concrete, mortar and other materials to prepare building material.
• Coordinated with other workers onsite to ensure efficient completion of tasks.
• Provided assistance to supervisors when needed completing additional duties as assigned.
• Inspected work areas for safety issues before beginning any task.
• Transported materials from one site location to another using trucks or trailers.
• Sustained safety protocols to maintain secure, proper handling of equipment and materials.
• Built temporary supports during construction processes such as shoring up beams or columns until they are set in place permanently.
• Lifted heavy objects into place with cranes or hoists.
• Addressed and resolved on-site problems to keep teams on-task and avoid development of larger concerns.
• Ensured compliance with local codes regarding building regulations.
• Utilized two-way radios and hand signals to coordinate communication between equipment operators.
• Performed lock-out-tag-out procedures on equipment prior to service work to promote workplace safety.
• Positioned, aligned or sealed concrete wall sections or pipes.
• Monitored progress of construction activities making sure deadlines were met.

• During my time working for Redhill Civil Construction on the central station metro project, I had tasks and duties involving basic civil work and site laboring.
• I'm also on labour hire to the lead contractor Laing O'Rourke as a authorised site forklift driver and dogman and filling in else where as needed around the site.
• Main day to day duties involve dogging telehandlers granary winch cranes operations of forklifts overseeing incoming trucks and light vehicles for deliveries or material pick ups and coordinating telehandlers/forklift around the site and basic store management duties.
• Other duties for this position included, maintaining site safety, maintaining access ways buntings and flagging, dewatering/maintaining dewatering lines, maintaining complex sump systems, maintaining site wash plant to meet the environmental standards, operating boom lifts and basic site carpentry and bin logistics.

• While employed at Bradken, my position started out as a casting operator, grinding metal castings to specification, before being promoted to sand casting machinery operator, where I made sand casting molds for molten steel to be poured and cast into.

• During my time at JRC Electrical, I was employed as a 4th-year overhead linesman and an electrician trades assistant.
• The work consisted of building and adding to overhead lines and structures, general electrical trades assistant work, preparation of installation of wires, site clean-up, and remediation, as well as yard and vehicle maintenance.

• I started hauling information technology in September 2016 as a telecommunications company to meet the requirements to work for myself as an nbn contractor.
• The main source of was nbn satellite and wifi.

• Wagga directional drilling is a cable hauler/supervisor working on the NBN and Telstra networks.
• Our main task was to haul fiber/copper cables to meet the requirements set by NBN.
• Other tasks included Telstra pit and pipe works, and hauling cables for Telstra 12-32 fibre private premise work.
• Followed safety regulations to minimize risks during operations and transport tasks.
• Operated vehicles in accordance with company policies and applicable laws and regulations.
• Reported any incidents or accidents to dispatch immediately upon occurrence.
• Installed and secured cable along designated pathways.
• Assisted team in pulling and routing fiber optic cables.
• Operated tools for cable installation and maintenance tasks.
• Adhered to safety protocols while handling equipment and materials.
• Communicated effectively with supervisors regarding project status updates.
• Collaborated with crew to ensure timely project completion.

• When employed broadly on a defense force contract at the Bandiana Army Barracks. My position was a trade assistant to mechanical fitters and mechanics.
• Duties included fitting vehicles with racking, box tubs, lighting, power supplies, UHF, satellite, Wi-Fi, cable maintenance and fitting, and some fabrication work.
• Other duties include housekeeping of the shed and work bays, as well as safety performance and quality checks.
• I was also the designated rigger/dogman for the shed I was working in.
• Assisted tradespeople with daily tasks and maintained worksite organization.
• Operated hand and power tools safely and efficiently for various projects.
• Collaborated with team members to complete tasks according to project timelines.
• Prepared work areas by setting up equipment and cleaning as needed.
• Conducted routine maintenance on tools and equipment to ensure optimal performance.
• Communicated effectively with tradespeople to clarify project requirements and updates.
• Followed instructions given by qualified tradespeople regarding safety protocols and procedures when working onsite or in the workshop.
• Operated hand tools such as drills, saws, grinders, sanders to assist tradespeople with their tasks.
• Ensured that all tools were stored safely after use or at the end of each shift.
• Assisted tradespeople in the assembly of components, tools and machinery.
• Removed debris from worksites using brooms, shovels, wheelbarrows.

• During the time I have been at Cogar, I have been working on a cable hauling crew, hauling all sized optic fiber cables and tethers, including NBN, to residential and industrial locations within Melbourne. Internal installation is included in my current role.

• During this time, I was employed first as a trades assistant and then as an apprentice overhead distribution linesman.
• Kinetic Power Services contracts included cross-arm replacements, major construction transformer upgrades, bulk consumer service replacements, reconductoring, pole changes, live-line maintenance works, EAP shutdown work, isolating, and network switching.