Robert Pearsom

• Fit outs from shops/ pubs/ apartments and houses.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Installed containment including tray , plastic conduit and duct.
• I’ve also worked a lot with data installing and terminating cameras and also at the wrack

• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Achieved consistent client satisfaction by prioritizing open communication throughout project stages, addressing concerns promptly and efficiently.
• On this job I was in charge of the wiring of the all the boards in the warehouses and the switch room. Cable sizes ranging from 70mm - 240mm.
• 
  

• During my time with Dornan’s I’ve worked and two Pharmaceuticals and one Data centre.
• For the data centre I was solely on the testing team for the whole project.
• From being on the testing team I gain a lot of experience in fault finding , through dead / live testing circuits.

• On the first pharmaceutical ( Bristol Myers Squid) I was only starting my apprenticeship and this consisted of…
• Installing containment steel conduit, ladder , tray and rico.
• Pulling air lines for pressure valves.
• And at the end of this job I started on a crew doing the loop checking of instruments. This entailed checking the instruments through there ranges from 25% - 100 % for the presssure gauges and then for the valves we have them open and close and then checking what position they failed in.

2nd Pharmaceutical (Amgen)

• At the start of this job it consisted of installing containment for all the cable runs.
• When the containment was finished I was put working on all the Dcs panels ( 6 panels in total).
• While working on Dcs panels I was terminating 1 pair cables all the way to 20 pair cables which I took a lot of pride in and had them looking great.
• I also terminated the majority of the field instruments and also added in conduit when needed to get to the instruments.