Roy Awa

Conduct water scraper pre start

List and report hazards

Adopt positive communications

Provide dust suppression in allocated work area

Park securely at all times

Shut down and isolate water scraper

Conduct water truck pre start

List and report hazards

Adopt postive communications

Provide dust suppression around mine site

Fill drill rigs water tanks once daily

Provide water for mobile equipment wash downs

Park securely at all times

Shut down and isolate equipment

Conduct pre start on machine equipment

List and report visible hazards

Adopt positive communication

Scraper cut material

Unload scraper at the fill area

Park scraper securely

Shut down and Isolate equipment

Conduct plant equipment pre start

List any noticeable hazards and report

Adopt positive communication

Strip topsoil with dozer and scraper to 300mm

Transport to stockpile

Park scraper and dozer securely at all times.

• Provide dust suppression
• Condition suitable fill material
• Fill water tank from overhead standpipe
• Push scrapers
• Rip and mix/condition material in borrow pits
• Direct scrapers and water scrapers in borrow pits
• Transport a variety of materials over the job site in a moxy
• Understood and followed oral and written directions.
• Completed day-to-day duties accurately and efficiently.
• Operated equipment with strong focus on safety and ground communication.

• Operated compactors, scrapers or rollers to level and compact refuse at disposal grounds.
• Utilized appropriate protective gear at all times while working around potentially dangerous equipment.
• Drove and maneuvered equipment in successive passes over working areas to remove topsoil, vegetation, or rocks.
• Adhered to all environmental protection policies when dealing with toxic waste materials.
• Safely operated heavy machinery including forklifts, loaders, excavators, bulldozers.
• Coordinated machine operations with other site personnel to keep materials moving smoothly and prevent accidents.
• Lubricated parts and performed minor maintenance to improve machine function.

• Complete all necessary Inductions
• Attend toolbox meetings
• Conduct mahinery pre start ups
• Followed plant safety procedures, rules, and regulations
• Operate various machinery in bulk eartworks operations,apply levels and compaction,condition material and provide dust suppression
• Report machinery faults
• Accurately fill out all necessary paperwork
• Park fundamentally stable
• Isolate electricals

• Inspected vehicle before and after trips and logged and reported mechanical problems to avoid unsafe hazards.
• Clearly communicated with dispatchers to give updated information on estimated times of arrival and latest road conditions.
• Inspected trucks and trailers before each trip to assess safety and identify maintenance concerns.
• Maintained telephone and radio contact with supervisor to receive delivery instructions.
• Monitored and managed fuel consumption and expenses for management reporting.
• Operated with safety and skill to avoid accidents and delays.
• Fastened chains, straps, covers, and binders to secure load during transit.

• Conducted safety inspections and followed safety rules and procedures.
• Followed plant safety procedures, rules, and regulations.
• Operate in bulk earthworks from cut to fill,provided compaction and dust suppression
• Reported machinery faults
• kept accurate load counts and paperwork
• Parked fundamentally stable at all times
• Isolated Machinery

• Managed time efficiently in order to complete all tasks within deadlines.
• Complete all necessary inductions
• Attend onsite toolbox
• Carry out pre start operations
• Strip topsoil
• Operate in bulk earthworks moving material from cut to fill
• Operate safely to manufacturers directions
• Keep accurate load counts
• Report any machine faults to workshop mechanics and Supervisor
• Park fundamentally stable at all times
• 
  
• 
  

• Strictly adhered to company safety procedures, noticeably decreasing job site accidents.
• Attended toolbox talks
• Participated in Pre start Checks
• Operated in bulk earthworks in cut to fill operations
• Operated safely to manufacturers directions
• Kept accurate load counts
• Provided valuable compaction to fill material
• Completed all paperwork accurately
• Parked fundamentally stable at all times

• Performed preventive maintenance to prolong life of equipment.
• Participated in Pre starts
• Operated under the instructions of management to transport loaded material to certain areas of the job site
• Operated machines safely as to manufactures directions
• Kept accurate load counts
• Parked fundamentally stable at end of day

• Read and understood specifications to understand job requirements
• Set up and operated scraper machinery in line with line orders and dockets
• Complied fully with safety requirements to protect personnel and company assets
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs
• Operated in bulk earthworks from cut to fill
• Kept machinery clean and operating efficiently to consistently meet production targets.

• Read and understood specifications to understand job requirements
• Complied fully with safety requirements to protect personnel and company assets
• Kept machinery clean and operating efficiently to consistently meet production targets
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs
• Set up and operated scraper and bulldozer machinery in line with line orders and dockets.

• Complied fully with safety requirements to protect personnel and company assets
• Kept machinery clean and operating efficiently to consistently meet production targets
• RA
• Read and understood specifications to understand job requirements
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs.

• Read and understood specifications to understand job requirements
• Set up and operated scraper machinery in line with line orders and dockets
• Complied fully with safety requirements to protect personnel and company assets
• Kept machinery clean and operating efficiently to consistently meet production targets
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs.

• Read and understood specifications to understand job requirements
• Complied fully with safety requirements to protect personnel and company assets
• Set up and operated scraper machinery in line with line orders and dockets
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs
• Kept machinery clean and operating efficiently to consistently meet production targets.

• Set up and operated scraper,moxy,compactor machinery in line with line orders and dockets
• Complied fully with safety requirements to protect personnel and company assets
• Read and understood specifications to understand job requirements
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs
• Kept machinery clean and operating efficiently to consistently meet production targets.

• Read and understood specifications to understand job requirements
• Complied fully with safety requirements to protect personnel and company assets
• Set up and operated scraper,compactor,moxy machinery in line with line orders and dockets
• Kept machinery clean and operating efficiently to consistently meet production targets
• Checked equipment before shifts to handle routine maintenance and notify management of advanced repair needs
• Controlled quality of finished products with regular inspections and non-destructive tests.

• Maximized load safety by balancing, securing, and weighing products.
• Maintained daily, legible DOT log book and submitted corresponding documents.
• Completed preventive maintenance checks and basic repairs to vehicles.
• Completed routine maintenance on truck to keep in working order.
• Managed efficient unloading of freight, inspected merchandise, and documented customer concerns for supervisor.
• Loaded and unloaded products at warehouses and customer locations using hand trucks, pallet jacks, and forklifts.
• Inspected load security and checked for damages.
• Dropped and hooked trailers and changed configuration of equipment.
• Operated with safety and skill to avoid accidents and delays.

• Assisted in loading, unloading, and ensuring that freight was ready for long-distance transport
• Kept delivery records, placed orders, collected payments, and kept records of transactions
• Ensured on-time deliveries in compliance with specified timeframes
• Reported problematic or malfunctioning machinery to owner
• Completed basic vehicle maintenance such as adding oil and fuel, lubricating parts and performing minor repairs
• Planned smooth vehicle routes to minimize delivery delays
• Checked the mechanical, safety and emergency equipment on each vehicle before leaving the distribution center.

• Operated heavy equipment to move large quantities of dirt and debris.
• Complete all necessary Inductions
• Attend all toolbox talks
• Conduct machine pre start up
• List and inform maintenence of mechanical faults
• Operate safely to manufacturers specs in bulk earthworks from cut to fill
• Accurately complete all necessary paperwork
• Park fundamentally stable
• Isolate electrics

Complete necessary Inductions

Attend toolbox

Conduct pre start up

LIst and report mechanical faults

Drive in a safe manner

Transport and tip loads in desired area of job site

Park fundamentally stable

Isolate electrics

Complete necessary inductions

Attend toolbox talks

Conduct pre start up of truck

Report mechanical faults to owner

Load truck efficiently with forklift

Secure loads with tie down straps

Drive safely obeying road rules

Deliver loads efficiently

Park fundamentally stable

Isolate electrics

Complete all necessary inductions

Attend toolbox talks

Conduct machine pre start up

List and report any mechanical faults to supervisor and workshop

Operate machinery in bulk earthworks from cut to fill and final trim work

Assist with labour duties eg:spotting,back filling

Accurately fill out all paperwork

Park fundamentally stable

Isolate electrics

• Complete all Inductions
• Attend toolbox talks
• Conduct machine pre start up
• List and report mechanical faults
• Followed plant safety procedures, rules, and regulations.
• Operate machinery in bulk earthworks from cut to fill and final trim
• Accurately complete all paperwork
• Park fundamentally stable
• Isolate electrics