Sebastian Chesterman

• Building Columns, Walls, Suspended Decks, stairs and Framing.
• Proficient in the use of Peri pans, Aerodeck and Doka formwork systems
• Observed all OSHA and corporate safety regulations and procedures to prevent mishaps and injuries on job sites.
• Coordinated movement of materials and equipment to job sites.
• Maintained high-quality workmanship by following blueprint specifications and construction standards.
• Upheld quality assurance procedures by conducting regular inspections of completed work for adherence to standards.
• Increased productivity by efficiently dismantling and cleaning formwork after concrete curing.
• Completed complex formwork projects requiring precise measurements and cuts, demonstrating attention to detail.
• Enhanced project efficiency by constructing formwork systems for concrete structures.
• Collaborated with team members for timely completion of projects, adhering to deadlines.
• Read blueprints and drawings to understand dimensions and design of form structure.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
• Contributed to efficient workflow by maintaining a clean and organized worksite, reducing hazards.

• Observed all OSHA and corporate safety regulations and procedures to prevent mishaps and injuries on job sites.
• Coordinated movement of materials and equipment to job sites.
• Contributed to efficient workflow by maintaining a clean and organized worksite, reducing hazards.
• Improved worksite safety with proper installation of reinforcement bars, ensuring structural integrity.
• Safeguarded structural stability during construction using temporary supports as needed, preventing damage or accidents from occurring.
• Completed complex formwork projects requiring precise measurements and cuts, demonstrating attention to detail.
• Collaborated with team members for timely completion of projects, adhering to deadlines.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Installing Formwork - Erecting the formwork onsite, ensuring its level, square and secure.
• Stripping/ Dismantling Formwork
• Landing Precast Girders/ dressing
• Collaborating with other trades onsite. ie.steelfixers
• Minimized environmental impact by recycling or reusing materials when possible, demonstrating commitment to sustainable practices.
• Read blueprints and drawings to understand dimensions and design of form structure.
• Reduced material wastage by accurately measuring and cutting materials for formwork assembly.

• Mark and line out formwork
• Interperate drawings and specifications
• Erect and dismantle formwork as instructed
• Perform second fixing
• Assist with steel fixing when required
• Inspect and ensure formworks and temporary works are firmly secured prior to concrete pour
• Complete placing of concrete
• Carry out planning tasks as requested
• Conduct pre-start checks on plant and equipment, hand tools, tooling and equipment prior carrying out the task
• Maintain and keep tools and equipment in a safe area.
• Comply with industry safety standards and work practices
• Follow quality control systems and techniques
• knowledge of correct PPE for the specific tasks
• Develop JHA for your tasks
• Regularly Inspect work area and complete Take-5 to assess risks and implement controls
• Housekeeping
• Perform other general duties as required
• Read blueprints and drawings to understand dimensions and design of form structure.
• Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Observed all OSHA and corporate safety regulations and procedures to prevent mishaps and injuries on job sites

• Assisted in troubleshooting and resolving on-site challenges, ensuring minimal project delays.
• Enhanced project efficiency by constructing formwork systems for concrete structures.
• Upheld quality assurance procedures by conducting regular inspections of completed work for adherence to standards.
• Read blueprints and drawings to understand dimensions and design of form structure.
• Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
• Shaped or cut materials to specified measurements using hand tools, machines and power saws.
• Observed all OSHA and corporate safety regulations and procedures to prevent mishaps and injuries on job sites.
• Coordinated movement of materials and equipment to job sites.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Building headstocks and abutments using conventional formwork and peri pans etc
• Use conventional formwork and peri pans to create molds and supports for pouring concrete.
• Measure, cut, and shape materials such as wood, plywood, and steel to build formwork according to specifications.
• Ensure formwork is properly aligned, leveled, and braced to withstand the weight and pressure of wet concrete
• Adhere to safety regulations and guidelines to prevent accidents and ensure a safe working environment
• Set up formwork systems using conventional methods or peri pans based on project preferences
• Check formwork alignment and levelness using tools such as spirit levels and laser levels.
• Pour and finish concrete within the formwork structures according to project specifications.
• Strip formwork after the concrete has cured and inspect for any defects or issues.
• Repair and maintain formwork components as needed to ensure reusability and structural integrity.
• Communicate with supervisors and team members to coordinate tasks and resolve any issues that may arise during formwork construction.
• Adhere to project schedules and deadlines to ensure timely completion of formwork tasks.

• Observed all OSHA and corporate safety regulations and procedures to prevent mishaps and injuries on job sites.
• Read blueprints and drawings to understand dimensions and design of form structure.
• Coordinated movement of materials and equipment to job sites.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Building columns, walls and decks according plans and drawings
• Communicated daily with job site supervisor to discuss milestones and update project schedule.
• Planned and executed work with proper tools and materials to maximize efficiency.

Formwork Carpentry

• Followed established job site safety regulations and maintained safe and clean work area.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Building columns, walls and decks according plans and drawings
• Communicated daily with job site supervisor to discuss milestones and update project schedule.

• Coordinated movement of materials and equipment to job sites.
• Read blueprints and drawings to understand dimensions and design of form structure.
• Setting up formwork for concrete pours and slabs
• Safely operated electric cordless and hammer drills and cutting torches.
• Working safely from ladders and scaffoldings
• Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
• Cut and shaped materials to meet outlined measurements.
• Planned and executed work with proper tools and materials to maximize efficiency.

• Followed established job site safety regulations and maintained safe and clean work area.
• Completed installations of building structures, trim, flooring, and cabinetry.
• Second Fix Carpentry
• Planned and executed work with proper tools and materials to maximize productivity.
• Planned projects by identifying necessary equipment, tools, and required assistance.
• Measured, drilled and sawed materials to perform successful home improvements.
• Built and hung custom doors and frames.
• Installed insulation, trim and other finishing touches.
• Measured, cut and installed drywall, paneling and other materials.

• Carpenter apprentice
• Planned and executed work with proper tools and materials
• Followed established job site safety regulations and maintained safe and clean work area.
• Measured, drilled and sawed materials to perform successful home improvements.
• Promoted sustainability in residential construction projects through the use of eco-friendly materials whenever possible without compromising quality or aesthetics.
• Inspected job sites to identify potential hazards and establish protection and safety standards.
• Built and hung custom doors and frames.
• Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
• Repaired damaged doors, windows and other structures.
• Measured, cut and installed drywall, paneling and other materials.

• Residential carpentry apprentice : assisted with movement of materials and equipment to job sites.
• Kept job site cleaned up properly and all debris disposed of in respective containers.
• Assisted with day-to-day operations, working efficiently and productively with all team members.