Summary
Overview
Work History
Education
Skills
Timeline
Generic

Simon Esh

Mandurah,WA

Summary

Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Overview

21
21
years of professional experience

Work History

Concrete Form Carpenter

PHI Constructions
Perth, Western Australia
11.2021 - Current
  • Worked closely with engineers, contractors, supervisors and foremen throughout the project duration.
  • Roughed in door and window frames or subflooring in structures undergoing construction or repair.
  • Took accurate measurements to calculate size and amount of materials needed for project completion.
  • Filled joints between sections of forms with mortar or grout material.
  • Assisted in the construction of concrete forms for various structures and projects.
  • Adhered to project blueprints and requirements to deliver quality work.
  • Replaced worn out parts on equipment used during the forming process such as wedges and ties.
  • Cleaned up job sites after completion of work including removing debris from worksite areas.
  • Fashioned frameworks or props using hand tools and wood screws, nails or glue.
  • Consistently constructed square and level projects.
  • Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
  • Set up, aligned, leveled, and braced forms as per engineering specifications.
  • Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
  • Measured and cut wooden boards to specific dimensions for formwork fabrication.
  • Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
  • Maintained clean and organized workplace to optimize performance, efficiency and safety.
  • Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
  • Followed safety procedures when working with hazardous materials such as cement mixes or adhesives.
  • Worked independently on projects and tasks within carpentry team.
  • Mixed, poured, spread and smoothed concrete using hand tools and power trowels.
  • Stripped off formed surfaces once they had set properly according to design plans.
  • Utilized various tools, equipment, materials and forming systems to complete construction tasks.
  • Erected scaffolding to assemble above-ground structures.
  • Trained and mentored apprentice carpenters, offering positive reinforcement, and providing assistance when needed.
  • Operated small machinery such as compressors and jackhammers while forming walls and columns.
  • Installed steel reinforcing bars into concrete forms prior to pouring concrete.
  • Inspected completed work to ensure quality standards were met before pouring concrete.
  • Ensured that all measurements were accurate with a tape measure or other tools.
  • Repaired damaged or broken forms as needed to prepare them for reuse.
  • Measured and marked cut lines on materials using ruler or marking gauge.
  • Placed anchor bolts into wet cement to secure structural members in place.
  • Learned project dimensions and form design by effective blueprint reading.
  • Provided assistance to laborers by carrying heavy objects such as lumber or blocks around the job site.
  • Followed OSHA and corporate safety regulations to avoid on-the-job injuries and accidents.
  • Utilized ladders, scaffolding and other tools necessary to complete high-level tasks safely.
  • Understood and followed oral and written directions.
  • Completed day-to-day duties accurately and efficiently.

Builder Helper

Xtreme Patios
Baldivis, Western Australia
01.2013 - 01.2020
  • Construction of patios
  • worked from plans to build patios
  • Loaded and unloaded building materials
  • Mixed cement and mortar using hoes or mechanical mixers.
  • Demonstrated best safety practices working at heights and lifting various objects.
  • Removed debris from work areas and performed final cleanings after completing projects.
  • Followed all safety procedures while working on site.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Assisted in lifting heavy objects into place during installation process.
  • Operated power tools such as saws and drills safely while performing tasks.
  • Set up scaffolding and ladders around work areas for safe access when needed.
  • Operated equipment with strong focus on safety and ground communication.

Mining Operator

Stone Resources
Laverton, Western Australia
01.2010 - 01.2013
  • Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.
  • Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.
  • Delegated work to staff, setting priorities and goals.
  • Adhered to all relevant legislation concerning health and safety in the workplace while leading by example in maintaining a safe environment for workers.
  • Operation of heavy mining machinery

Concrete Laborer

KCL Concrete
Mandurah, Western Australia
01.2003 - 01.2010
  • Supervised the loading, unloading, and mixing of concrete materials onsite.
  • Level ground prior to pouring foundation or slab with shovels or grading machines.
  • Carry heavy materials such as bricks, blocks, lumber, mortar mixers, and wheelbarrows across job sites safely.
  • Mixed and poured concrete according to standard ratios.
  • Set concrete forms to desired pitch and depth and aligned.
  • Mix cement and sand to create concrete, following specific measurements.
  • Mixed cement and mortar in preparation for pouring.
  • Built forms to specific dimensions to shape wet concrete.
  • Set up and reinforced forms to accurately pour concrete for walkways and other structures.
  • Use shovels, hoes, rakes, and other tools to spread or level concrete.
  • Positioned wire mesh and rebar to reinforce concrete.
  • Prepared concrete by hand mixing sand and cement.
  • Remove any excess material from the surface of the concrete after it has been poured.
  • Dismantled forms using basic and advanced tools.
  • Shaped rounded edges on corners with edger tool and created grooves to control cracking.
  • Poured concrete into forms using pump hose and leveled.
  • Finished surfaces by troweling, floating and brushing following project requirements and specifications.
  • Clean up work area by disposing of debris correctly when job is completed.
  • Calculated concrete quantities needed for jobs.

Education

Year 11 -

Monivae College
Hamilton, VIC
01-1996

Skills

  • Commercial Projects
  • Heavy Lifting
  • Material Prepping
  • Structure Assembly
  • Hand and Power Tools
  • Forming and Pouring
  • Surface Sanding
  • Commercial Construction Experience
  • Decision Making and Prioritization
  • Carpentry and Woodworking
  • Construction Background
  • Concrete Form Construction
  • Measurements and Calculations
  • Safety Procedures

Timeline

Concrete Form Carpenter

PHI Constructions
11.2021 - Current

Builder Helper

Xtreme Patios
01.2013 - 01.2020

Mining Operator

Stone Resources
01.2010 - 01.2013

Concrete Laborer

KCL Concrete
01.2003 - 01.2010

Year 11 -

Monivae College

Similar Profiles

CREATE PROFILE
Simon Esh