Alvaro Di Giannicola

Commercial Painting Srevices

Programmed by P E R S O L

Canberra, ACT

11.2001 - Current

Assessed work areas to determine safety measures required before beginning job;.
Prepared surfaces by washing, scraping, sanding and patching holes;.
Mixed paints to desired color and texture;.
Applied primers and sealers to prepare new surfaces for painting;.
Measured, cut, and installed wallpaper;.
Applied paint with brushes, rollers, spray guns or other equipment;.
Cleaned up job sites after completion of projects;.
Inspected painted surfaces for defects such as cracking, blistering or fading;.
Consulted with clients regarding colors and finishes;.
Estimated cost of materials needed for the project;.
Provided expert advice on best products to use for various jobs;.
Used ladders and scaffolds to reach high walls and ceilings;.
Selected appropriate paint colors based on customer preferences;.
Removed old wall coverings before applying new ones;.
Repaired cracks in drywall prior to painting or wallpapering rooms;.
Followed manufacturer's instructions when mixing chemicals for special applications ;.
Performed minor repairs such as caulking windowsills before painting them ;.
Protected furniture from dust generated during preparation of walls ;.
Ensured proper ventilation while using solvents or oil-based paints ;.
Wore protective clothing such as masks, respirators and gloves.
Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
Used power and hand tools safely and effectively.
Cleaned and properly stored paint equipment and supplies at end of each workday.
Performed repairs to defects in walls by patching holes and scrapes prior at project start.
Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
Cleaned and smoothed surfaces prior to painting.
Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
Applied paints, sealers and solvents to plaster, sheetrock, concrete and wood.
Spread undercoats and finish materials using rollers and spray equipment.
Smoothed and finished surfaces on walls, trim and cabinetry.
Chose correct brushes and materials for jobs and purchased from vendors.
Prepared sheetrock, metal and wood surfaces for painting.
Sprayed prepared surfaces with specified amounts of primers and finish coatings.
Mixed and applied paints, varnishes and sealants to promote lasting finish.
Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
Performed series of surface preparation techniques to maximize paint durability.
Operated airless spray equipment and motorized lifts.
Selected, mixed and applied surface coatings to match and restore interior or exterior surfaces.
Performed minor plaster repair, blending newly renovated wall surfaces with existing plaster.
Mixed paints and solutions and monitored consistencies.
Maintained thorough inventory of paint equipment and supplies by checking product levels.
Documented progress and provided estimated completion time for clients.
Recommended blending, harmonizing and contrasting color options to customers.
Smoothed surfaces using sandpaper, scrapers or sanding machines.
Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
Filled cracks, holes or joints using caulking guns or putty knives.
Mixed and matched paint, stain or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
Removed pictures, door knobs or electric switch covers prior to painting.
Completed high-volume weekly painting jobs with consistently positive customer feedback.
Applied primers or sealers to prepare bare wood or metal for finish coats.
Removed old finishes by stripping, sanding or using water or abrasive blasting.
Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
Erected scaffolding or swing gates or set up ladders to work above ground level.
Calculated amounts of materials and estimated cost based on surface measurements or work orders.
Washed and treated surfaces with oil, turpentine or other preparations.
Constructed scaffolding and supports to complete work above ground-level.
Completed diverse repairs on commercial and residential buildings and equipment.
Performed minor carpentry work such as installing shelves or repairing furniture.
Maintained records of all maintenance activities performed on the property.
Installed drywall panels and painted interior walls when necessary.
Managed inventory of supplies used for property maintenance tasks.
Performed routine inspections of the exterior of the building for signs of damage or wear.
Operated power tools such as saws and drills to perform various repairs.
Coordinated with contractors to ensure that all repair jobs were completed properly.
Ensured that all safety protocols were followed while performing maintenance duties.
Routinely inspected equipment for preventive and emergency maintenance needs.
Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
Repaired machines, equipment or structures using tools or equipment.

Summary

Overview

Work History

Commercial Painting Srevices

Education

High School Diploma -

Skills

Timeline

Commercial Painting Srevices

High School Diploma -

Similar Profiles

Boban KotevskiBoban Kotevski

Owen BoughtonOwen Boughton

Daniel Van StynDaniel Van Styn

Brayth HartasBrayth Hartas

Shobita battaShobita batta