Christopher Comley

• Worked alongside team to accomplish work goals according to schedule.
• Understood and followed verbal and written instructions to complete work correctly.
• Maintained organized and clean work areas at all times on job sites.
• Loaded, unloaded, and moved material to and from storage and production areas.
• Organized materials, tools, and equipment to supply team members.
• Performed general housekeeping and cleaning tasks.
• Followed proper equipment operation and maintenance procedures to keep equipment in good working condition.
• Identified and reported hazards on job sites to prevent accidents and injuries.
• Observed site safety rules to maximize protections for team members and equipment.
• Used variety of hand and power tools to complete tasks.
• Followed instructions and safety protocols to prevent accidents and injuries.
• Cleaned and maintained tools, equipment and worksites.
• Moved and cleared debris from work sites to dispose of in designated areas.
• Followed instructions and safety protocols while operating machinery and equipment.
• Inspected tools and equipment to maintain safety and efficiency.
• Complied with truck driving rules as well as company policies and procedures regarding safe vehicle operations.
• Used two-way radios to stay in contact with dispatch and receive last-minute instruction changes.
• Protected people and equipment from hazardous materials by using correct procedures.
• Filled out load paperwork and DOT-mandated log books.
• Observed hand signals, grade stakes and other markings when operating machines.
• Performed repairs, replacements and general maintenance on mining equipment.
• Closely monitored and recorded locations, mining progress and safety conditions.
• Moved materials using equipment to transfer to different workstations.
• Cleaned off build-up or excess materials blocking pathways and machinery operation.

• Read work orders to determine setup specifications.
• Removed finished products from machines, stacked, boxed and forwarded through production line.
• Observed machine operation and made adjustments during production run while operating two or more machines.
• Set up and operated machinery for binding and related finish operations to meet quantity and quality standards.
• Followed policies, procedures, continuous quality
• improvement objectives and safety and environmental practices to promote workplace efficiency.
• Recommended repairs, parts, blades and supplies to keep equipment in optimal working condition.
• Aligned screws to regulate tension of creasing blades and folding rollers.
• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Excellent communication skills, both verbal and written.
• Passionate about learning and committed to continual improvement.
• Operated machining equipment safely with team of operators.
• Complied with company and OSHA safety rules and regulations.
• Set up and adjusted equipment and properly configured machines for daily operation.
• Set up and ran machinery to produce exceptional products for industrial needs.
• Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
• Quickly shut down equipment in emergency situations following protocols.
• Utilized balers to compress recyclable materials.
• Sorted materials to separate high-grade materials such as copper and brass.
• Collected and sorted recyclable construction materials such as concrete, drywall and plastic into appropriate containers.
• Cut discarded products such as appliances and automobiles into small pieces with blow torches and saws.
• Sorted materials such as metals, glass or plastics into appropriate containers for recycling.
• Inspected materials to determine appropriate placements for repurposing or disposal.
• Compressed materials into reusable, shippable or movable sizes using balers and other equipment.
• Operated forklifts, pallet jacks or front-end loaders to load bales, bundles or other heavy items onto trucks for shipping to smelters or other recycled materials processing facilities.
• cleaning and maintaining of equipment
• repairs of equipment

• Spotting for excavator to maintain safe operations
• Maintained organized and clean work areas at all times on job sites.
• Demolishing old properties.
• General labouring (installing fencing to enclose properties.)
• Asbestos removal.
• Prepared job sites by removing debris and setting up materials and tools.
• Organized materials, tools, and equipment to supply team members.
• Utilized construction tools and machinery to effectively complete job site projects.
• Followed proper equipment operation and maintenance procedures to keep equipment in good working condition.
• Observed site safety rules to maximize protections for team members and equipment.
• Dug trenches, ditches and holes to allow for utility, water and sewer installation and proper foundation for structures.
• Used variety of hand and power tools to complete tasks.
• Loaded and unloaded materials onto trucks and trailers.
• Followed instructions and safety protocols to prevent accidents and injuries.
• Cleaned and maintained tools, equipment and worksites.
• Moved and cleared debris from work sites to dispose of in designated areas.
• Loaded and unloaded materials and equipment onto and off construction sites.
• Completed tear-down of existing structures to prepare for new construction.

• Maintained organized and clean work areas at all times on job sites.
• Delivery of sheets to jobsite as directed.
• sorted recyclable materials for resale.
• operation of forklift.
• Loaded, unloaded, and moved material to and from storage and production areas.
• Prepared job sites by removing debris and setting up materials and tools.

sorted and lifted bags of cerement.

• Organized materials, tools, and equipment to supply team members.
• Identified and reported hazards on job sites to prevent accidents and injuries.
• Loaded and unloaded materials onto trucks and trailers.
• Followed instructions and safety protocols to prevent accidents and injuries.
• Cleaned and maintained tools, equipment and worksites.

• Cleaned and prepared worksites to eliminate possible hazards.
• installing ceilings and walls in commercial and domestic premises.
• performing general labouring duties
• measuring and preparation of gyprock sheeting.
• using power tools and equipment.
• cleaning of tools and equipment.
• installing of insolations in roofs.

• Experienced in using and maintaining specialized tools and equipment associated with trades.
• Reinforced constructions techniques and proper use of hand tools, power tools and equipment to encourage worksite safety.
• EWP operations
• Assisting pipe fitters
• Spotting for EWP
• setting up safety barricades
• fire watch
• collections of materials for welders and pipe fitters.

• Performed maintenance and minor repairs to various machines under supervision.
• Preformed trades assistant duties.
• Undertook travel to and from the Yandi mining site to collect parts and stock for the mechanics.
• Traffic control duties.
• Maintained a clean and tidy workshop.
• Assisted fitters and service operators.
• Washed down Machinery on was pad ready to be used by servicemen.

• Assisted team members with tasks that required groups efforts.
• Replacing of condenser pipes out of condenser station.
• Performed trades assistant duties.
• Collaborated with team members to carry out efficient work with optimal safety and achieve timetables.
• Performed quality checks on products and materials to identify any defects.
• Notified supervisors of defective equipment or material.
• working in a confined space.
• septenary watch

• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Basic Dogging
• Basic Rigging
• Assembling conveyor belt stands and rollers and putting in place using franna crane.
• installing stone guards.
• Preparing area for steel platforms.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Paid attention to detail while completing assignments.
• Worked flexible hours across night, weekend and holiday shifts.
• Developed and maintained courteous and effective working relationships.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.

• compacted materials around gas pipes.
• Understood and followed verbal and written instructions to complete work correctly.
• Maintained organized and clean work areas at all times on job sites.
• Dug trenches, ditches and holes to allow for utility, water and sewer installation and proper foundation for structures.
• Spotted excavator
• setting/installing of barricades