TEOFISTO JR CASTRO CULANGGO
Orelia
Summary
Experienced Certified Welder/Fabricator and Body Builder with strong technical aptitude and well-developed mechanical knowledge. Skilled in vehicle body building, heavy transport body structure fabrication, and structural steel fabrication. Proficient in reading and interpreting technical sketches and engineering drawings. Capable in multiple welding processes including SMAW, GMAW, FCAW, and stainless-steel welding. Committed to quality workmanship and safety standards. Seeking a challenging role in the Bodybuilding and Fabrication industry to further develop skills and contribute as a valuable asset to a team.
Overview
38
38
years of professional experience
Work History
Fabricator/Welder
Custom Quip Engineering (CQE)
02.2024 - 05.2025
- Company Overview: Producer and dealer of heavy transport body structure such as; Road train, Flat tops, Drop decks, Side tipper, End tipper, skeletal trailer, Tankers, Dollies and etc.
- Fabricate chassis and body structure base on drawing given.
- My common jobs were subframe chassis for Side and End tipper.
- Fabricate of body structure of Flat tops and Drop deck.
- Fabricate Skeletal and Dolly.
- For body Bowl, I fabricated only one time.
- Sometimes I was assigned in repair department for modification, body structure alignment and repair job.
- Some jobs were pipe bending, bandsaw cutting, drilling, oxy and plasma cutting. And metal sheet cutting.
- I can weld using MIG/ flux Cored and Stainless solid wire and flux cored stainless wire. Include operate forklift.
- Producer and dealer of heavy transport body structure such as; Road train, Flat tops, Drop decks, Side tipper, End tipper, skeletal trailer, Tankers, Dollies and etc.
Fabricator/Welder
Custom Quip Engineering (CQE)
02.2024 - 05.2025
- Company Overview: Producer and dealer of heavy transport body structure such as; Road train, Flat tops, Drop decks, Side tipper, End tipper, skeletal trailer, Tankers, Dollies and etc.
- Fabricate chassis and body structure base on drawing given.
- My common jobs were subframe chassis for Side and End tipper.
- Fabricate of body structure of Flat tops and Drop deck.
- Fabricate Skeletal and Dolly.
- For body Bowl, I fabricated only one time.
- Sometimes I was assigned in repair department for modification, body structure alignment and repair job.
- Some jobs were pipe bending, bandsaw cutting, drilling, oxy and plasma cutting. And metal sheet cutting.
- I can weld using MIG/ flux Cored and Stainless solid wire and flux cored stainless wire. Include operate forklift.
- Producer and dealer of heavy transport body structure such as; Road train, Flat tops, Drop decks, Side tipper, End tipper, skeletal trailer, Tankers, Dollies and etc.
Fabricator/Welder
Intel Steel Engineering
05.2023 - 01.2024
- Company Overview: Structural job, building structure and site building structure erection.
- Site building erection.
- Fabricate switch room structure.
- Fabricate handrails & weld.
- Fabricate column grating and gates etc.
- Operate acetylene, plasma & quickie cutting.
- Operate bandsaw machine.
- Stick welding, repair and modeling of job site.
- Operate forklift.
- Structural job, building structure and site building structure erection.
- Part Time from 2021 to May 2023
Fabricator/Welder
Intel Steel Engineering
05.2023 - 01.2024
- Company Overview: Structural job, building structure and site building structure erection.
- Site building erection.
- Fabricate switch room structure.
- Fabricate handrails & weld.
- Fabricate column grating and gates etc.
- Operate acetylene, plasma & quickie cutting.
- Operate bandsaw machine.
- Stick welding, repair and modeling of job site.
- Operate forklift.
- Structural job, building structure and site building structure erection.
- Part Time from 2021 to May 2023
Welder/ Fabricator
AUSPLOW FARMING SYSTEM
02.2019 - 04.2023
- Company Overview: Producer & dealer of farm equipment such as; au seeder, DBS tine, Air carts, Deep tillage, etc.
- Fabricate the parts of body frame.
- Welding heavy gauges steel, SHS bar, RHS bar and pipes in many kinds of jobs such as all kinds of body frame [big and small], Drawbar, Auger arms, ADD on bar, Tow hitch, solid hinges, center axle, and etc. All positions of welding are applied in this welding job.
- Producer & dealer of farm equipment such as; au seeder, DBS tine, Air carts, Deep tillage, etc.
Welder/ Fabricator
AUSPLOW FARMING SYSTEM
02.2019 - 04.2023
- Company Overview: Producer & dealer of farm equipment such as; au seeder, DBS tine, Air carts, Deep tillage, etc.
- Fabricate the parts of body frame.
- Welding heavy gauges steel, SHS bar, RHS bar and pipes in many kinds of jobs such as all kinds of body frame [big and small], Drawbar, Auger arms, ADD on bar, Tow hitch, solid hinges, center axle, and etc. All positions of welding are applied in this welding job.
- Producer & dealer of farm equipment such as; au seeder, DBS tine, Air carts, Deep tillage, etc.
fabricator/welder
NATIONAL LINTEL
08.2018 - 01.2019
- Company Overview: Structural jobs (housing and Buildings)
- Fabricate columns, gratins, bras sing and Gates.
- Joint I-beam with penetration weld.
- Fabricate handrails and weld.
- Operate Punching hole machine, Press cutting machine, band saw and Bending machine.
- Oxy- acetylene, Plasma and quickie cutting.
- Work with specific drawing, hand tools and weld GMAW, FCAW equipment.
- Structural jobs (housing and Buildings)
fabricator/welder
NATIONAL LINTEL
08.2018 - 01.2019
- Company Overview: Structural jobs (housing and Buildings)
- Fabricate columns, gratins, bras sing and Gates.
- Joint I-beam with penetration weld.
- Fabricate handrails and weld.
- Operate Punching hole machine, Press cutting machine, band saw and Bending machine.
- Oxy- acetylene, Plasma and quickie cutting.
- Work with specific drawing, hand tools and weld GMAW, FCAW equipment.
- Structural jobs (housing and Buildings)
BODY BUILDER/ welder
HOWARD PORTER
02.2010 - 07.2018
- Company Overview: Producer and dealer of heavy transport body structure such as. Tanker, tippers, flat deck, drop deck, extendable, skeletal trailers.
- Fabricate all kinds of body structure based on drawing.
- My Common job was drop deck body fabrication.
- All ramps (double and single) assign to me including mounting to the body.
- Some jobs were pipe bending, bandsaw, drilling, oxy- acetylene cutting.
- Equipment used for welding were GMAW AND FCAW.
- Producer and dealer of heavy transport body structure such as. Tanker, tippers, flat deck, drop deck, extendable, skeletal trailers.
BODY BUILDER/ welder
HOWARD PORTER
02.2010 - 07.2018
- Company Overview: Producer and dealer of heavy transport body structure such as. Tanker, tippers, flat deck, drop deck, extendable, skeletal trailers.
- Fabricate all kinds of body structure based on drawing.
- My Common job was drop deck body fabrication.
- All ramps (double and single) assign to me including mounting to the body.
- Some jobs were pipe bending, bandsaw, drilling, oxy- acetylene cutting.
- Equipment used for welding were GMAW AND FCAW.
- Producer and dealer of heavy transport body structure such as. Tanker, tippers, flat deck, drop deck, extendable, skeletal trailers.
OWNER/BODY BUILDER
BEBOT C. AUTOMOTIVE SHOP
01.2001 - 01.2010
- Company Overview: Job accepted as follows; short and long bed cargo truck re-building and Repair, jeepney body and power train assembling, smash repair, cabin Repair, and body painting.
- Management and running the shop was my main concern.
- Decision maker for job acceptance quotation /estimate for labor and materials of the job construct.
- Supervising and giving instruction to my workers as body builders, Mechanics and painters were my responsibility, especially about the quality job.
- Some of my time I worked in body building to accelerate the job.
- Job accepted as follows; short and long bed cargo truck re-building and Repair, jeepney body and power train assembling, smash repair, cabin Repair, and body painting.
OWNER/BODY BUILDER
BEBOT C. AUTOMOTIVE SHOP
01.2001 - 01.2010
- Company Overview: Job accepted as follows; short and long bed cargo truck re-building and Repair, jeepney body and power train assembling, smash repair, cabin Repair, and body painting.
- Management and running the shop was my main concern.
- Decision maker for job acceptance quotation /estimate for labor and materials of the job construct.
- Supervising and giving instruction to my workers as body builders, Mechanics and painters were my responsibility, especially about the quality job.
- Some of my time I worked in body building to accelerate the job.
- Job accepted as follows; short and long bed cargo truck re-building and Repair, jeepney body and power train assembling, smash repair, cabin Repair, and body painting.
Supervisor in reconditioning
SOUTHEAST ASIAN MOTOR
05.1995 - 12.2000
- Company Overview: Japan surplus importer and dealer of short and long bed cargo truck.
- Supervised all body building contractors and painting contractors.
- I worked for the job order of repair estimate for labor to the contractor in every unit to be repaired.
- Job specification, measurement, structure, and quality of the job.
- JOB distribution and job instruction was also my concern.
- All imported truck and equipment must be fully repaired and reconditioned, Body re-building for cargo truck, dump truck must be repaired.
- All welding jobs only SMAW process.
- Japan surplus importer and dealer of short and long bed cargo truck.
Supervisor in reconditioning
SOUTHEAST ASIAN MOTOR
05.1995 - 12.2000
- Company Overview: Japan surplus importer and dealer of short and long bed cargo truck.
- Supervised all body building contractors and painting contractors.
- I worked for the job order of repair estimate for labor to the contractor in every unit to be repaired.
- Job specification, measurement, structure, and quality of the job.
- JOB distribution and job instruction was also my concern.
- All imported truck and equipment must be fully repaired and reconditioned, Body re-building for cargo truck, dump truck must be repaired.
- All welding jobs only SMAW process.
- Japan surplus importer and dealer of short and long bed cargo truck.
Body builder Contractor
JSG MOTORS CORPORATION
06.1987 - 04.1995
- Company Overview: Japan surplus importer and dealer of small and long, big cargo truck, dump truck, jeepney and bus passenger fabrication.
- First 3 years I worked as a body builder helper the rest of the year I had become a body builder contractor; our job as follows;
- Body builder contractor for jeepney passenger bus fabrication.
- All wood body cargo truck replaced into steel body structure.
- Dash bord conversion from RIGHT HAND DRIVE VEHICLE into LEFT HAND DRIVE VEHICLE include cabin repair, payment by Contract basis.
- Stick welding (SMAW) process only that time.
- Japan surplus importer and dealer of small and long, big cargo truck, dump truck, jeepney and bus passenger fabrication.
Body builder Contractor
JSG MOTORS CORPORATION
06.1987 - 04.1995
- Company Overview: Japan surplus importer and dealer of small and long, big cargo truck, dump truck, jeepney and bus passenger fabrication.
- First 3 years I worked as a body builder helper the rest of the year I had become a body builder contractor; our job as follows;
- Body builder contractor for jeepney passenger bus fabrication.
- All wood body cargo truck replaced into steel body structure.
- Dash bord conversion from RIGHT HAND DRIVE VEHICLE into LEFT HAND DRIVE VEHICLE include cabin repair, payment by Contract basis.
- Stick welding (SMAW) process only that time.
- Japan surplus importer and dealer of small and long, big cargo truck, dump truck, jeepney and bus passenger fabrication.
Education
Bachelor of Science - Industrial Technology, Automotive Mechanic and Body Building
Don Mariano Marcos Memorial Polytechnic State College
03.1989
High School - undefined
Bocboc National High School
Bocboc Don Carlos, Bukidnon03.1995
Elementary School - undefined
Bocboc Elementary School
Bocboc Don Carlos, Bukidnon03.1981
Skills
- Able to weld SMAW, GMAW ,FCAW and Stainless
- Able to weld heavy gauge steel, SHS and RHS bar
- Able to operate quickie oxy- acetylene and heating alignment
- Can plan, lay out, fabricate pattern and template development
- Able to operate plasma and arc gauging process
- I am competent in interpreting sketches and engineering drawing
- Good working ability to support others
- Sufficient working knowledge of skill to be able to work alone
- Able to operate a forklift
Personal Information
- Age: 57
- Date of Birth: 11 March 1968
- Height: 5'4"
- Weight: 70kg
- Visa Status: Subclass 186(permanent residence)
- Nationality: Filipino
- Work Permit: Subclass 186(permanent residence)
Certifications & Licenses
- MEM30305 Certificate III in Engineering, 2014-08-04, Choice Industrial Training, Q4177/6289, 52378
- Certificate of Competency Gas Metal Arc Welding [MISW] 4F, 2010-03-03, Marine Inspection Services
- National Certificate II in Stick Metal Arc Welding Solid Plates & Pipes (SMAW), 2008-08-12, Philippine Welding Society TESDA, Taguig, Manila, Philippines
- Certificate of Training Shielded Metal Arc Welding [SMAW] NC II, 2007-05-12, Don Carlos, Bukidnon, Philippines
- Construction Induction Occupational Health and Safety [White Card] WA, 2013-12-30, Frontline Safety and Training Services
- Working at Height, 2013-05-05, AUS_COM Training Center, Bibra Lake, WA
- Enter and Work in Confined Space, 2013-05-06, AUS_COM Training Center, Bibra Lake, WA
- License to Operate a Forklift Truck TLILIC0003 [WA], 2023-05-03, KG Training & Assessing
- License to Operate Boom-type Elevating Work Platform (boom length 11 meters or more) TLILIC0005 [WA], 2023-05-10, KG Training & Assessing
- Working Safely at Heights RIIWHS204E, 2023-07-31, 46402, KG Training & Assessing
- Enter & Work in Confined Spaces RIIWHS202E, 2023-08-03, 46419, KG Training & Assessment
- Operate A Gantry/Overhead Crane, 2024-10-05, 15269242-10161896, JustCareers Training
Professional References
- Matthew Pirga, CQE (Custom Quip Engineering), Operation Manager, 0498 877 032
- Polly Jacildo, Bruce Rock Engineering (Forrestfield), Former workmate in CQE company, 0433 882 428
- Joel Daffin, Ausplow Farming System, Leading Hand, 0404 696 663, joeliole82@hotmail.com
- Bryan Darryll Salas, Intel Steel Engineering, Leading Hand, 0413 109 776
Disclaimer
I hereby affirm that the above information is true and correct based on my full knowledge.
Timeline
Fabricator/Welder
Custom Quip Engineering (CQE)
02.2024 - 05.2025
Fabricator/Welder
Custom Quip Engineering (CQE)
02.2024 - 05.2025
Fabricator/Welder
Intel Steel Engineering
05.2023 - 01.2024
Fabricator/Welder
Intel Steel Engineering
05.2023 - 01.2024
Welder/ Fabricator
AUSPLOW FARMING SYSTEM
02.2019 - 04.2023
Welder/ Fabricator
AUSPLOW FARMING SYSTEM
02.2019 - 04.2023
fabricator/welder
NATIONAL LINTEL
08.2018 - 01.2019
fabricator/welder
NATIONAL LINTEL
08.2018 - 01.2019
BODY BUILDER/ welder
HOWARD PORTER
02.2010 - 07.2018
BODY BUILDER/ welder
HOWARD PORTER
02.2010 - 07.2018
OWNER/BODY BUILDER
BEBOT C. AUTOMOTIVE SHOP
01.2001 - 01.2010
OWNER/BODY BUILDER
BEBOT C. AUTOMOTIVE SHOP
01.2001 - 01.2010
Supervisor in reconditioning
SOUTHEAST ASIAN MOTOR
05.1995 - 12.2000
Supervisor in reconditioning
SOUTHEAST ASIAN MOTOR
05.1995 - 12.2000
Body builder Contractor
JSG MOTORS CORPORATION
06.1987 - 04.1995
Body builder Contractor
JSG MOTORS CORPORATION
06.1987 - 04.1995
High School - undefined
Bocboc National High School
Elementary School - undefined
Bocboc Elementary School
Bachelor of Science - Industrial Technology, Automotive Mechanic and Body Building
Don Mariano Marcos Memorial Polytechnic State College
Similar Profiles
Andreia Bento De OliveiraAndreia Bento De Oliveira
Integrated Non-Doctoral Researcher at CQE, Universidade De LisboaIntegrated Non-Doctoral Researcher at CQE, Universidade De Lisboa
Damion PiperDamion Piper
Shop Foreman at Custom Data EngineeringShop Foreman at Custom Data Engineering
Nancy GradoNancy Grado
Machine Operator at Custom Engineering PlasticsMachine Operator at Custom Engineering Plastics
Marie Emily JeromeMarie Emily Jerome
Assistant Educator at Almost French Early Learning CentreAssistant Educator at Almost French Early Learning Centre
Brianna GibbensBrianna Gibbens
Client Service Coordinator at GFA Accountants & Business AdvisorsClient Service Coordinator at GFA Accountants & Business Advisors