Usaia Soqoiwasa
Noble Park,VIC
Summary
Dynamic Aircraft Technician with extensive experience at Leonardo and Boeing, UK, excelling in precision drilling and aircraft inspection. Proven ability to lead teams and ensure compliance with safety standards. Recognized for proactive problem-solving and maintaining high-quality documentation, contributing to successful aircraft delivery and operational efficiency.
Overview
31
31
years of professional experience
Work History
Aircraft Technician
Marand Precision Engineering
Moorabbin, Victoria
05.2023 - Current
- Carry out precision drilling and assemble of structural components in accordance with engineering drawings.
- Application of liquid shims between joints to minimise gaps to 0.002”.
- Ensure all documentation are correct and to the latest amendment.
- Ensure all tools are serviceable, etched and accounted for daily.
- Preparation of components for quality check prior to final fit.
- Operated power tools, gauges and testing equipment to adjust, repair, and replace faulty components in aircrafts.
- Maintained repair logs to document all corrective and preventive aircraft maintenance.
- Inspected airframes to detect wear and other defects.
- Maintained, repaired and rebuilt aircraft structures and fuel, electrical, and oxygen systems.
Aircraft Mechanical Fitter
Boeing UK
Middle Wallop, Hampshire
11.2022 - 05.2023
- Carry out Minor Primary and Minor Serving.
- Carry out all tasks of first signature responsibilities.
- Forward Planning of Emerging Work and Identification of Obstacles that will delay progress.
- Mechanical Assemble and Disassemble of Aircraft Sub-Assemblies Internally and Externally in accordance with Engineering Drawings and Procedures.
- Dismantled and reassembled delicate mechanisms.
- Reviewed finished equipment for accurate fit and assembly.
- Thoroughly read and comprehended blueprints in order to understand how installation was to be performed.
- Connected pipes through caulking, gluing and welding.
Aircraft Mechanical Inspector/Fitter
Leonardo Helicopters
Yeovil, Somerset
06.2018 - 11.2022
- Structural Build and Repairs in accordance with Design Authorized drawings and instructions.
- Carry out Aircraft Initial Receipt Inspection and Acceptance for Customer through life support.
- Forward Planning of Emerging Work and Identification of Obstacles that will delay progress.
- Ensure all Logistical and Engineering support and requirements relating to the work are available immediately.
- Ensure All Spare Component life details and work record are current.
- Maintain a regular update of work progress between Line management and shop floor.
- Mechanical Assemble and Disassemble of Aircraft Sub-Assemblies Internally and Externally in accordance with Engineering Drawings and Procedures.
- Carry out Stage preparation for Customer Acceptance as work progresses.
- Function Test Mechanical systems to confirm that any tolerance is within Limits.
- Ensure all Documentation, Inspections are complete and signed for.
- Aircraft Preparation for Final Customer acceptance, Ground Run and Flight Test.
- Aircraft Preparation for Delivery by Road, Air or Sea.
- Checked color, shape, texture and grade of products and materials against established templates, charts, and samples.
- Followed safety protocols while handling hazardous materials.
- Repaired faults, reassembled products, and completed additional tests.
- Provided feedback to production team regarding product quality.
- Monitored product quality at all stages of production process.
- Recorded inspection and test results on data sheets.
- Assisted in developing inspection and testing protocols.
Mechanical Technician
UAV TACTICAL SYSTEMS LIMITED
Leicester, UK
04.2016 - 06.2018
- Delivered serviceable aircraft on a day-to-day basis.
- Serviced, Repaired, and replaced numerous Rolls Royce Generators.
- Removed and replaced numerous Air Condition Unit.
- Carried out Schedule Maintenance and repair on Aircraft, ATOLS (Automatic Take-off and Landing System), GDT (Ground Data Terminal), Arrestors and PATE to meet the operational demand.
- Maintained a passage of communication between the shop floor and line manager.
- Carried out managerial activities associated with all tasks undertaken.
- Carried out all follow up actions associated with the task is completed and all work not carried out are documented and handed over before the end of the shift.
- Carried out various secondary tasks such as ASE, Issue Centre (PTT), and FLAPS and maintaining a high standard of Self Quality Audit.
- Ensured that all work carried out are compliant with AESO (Aircraft Engineering Standing Orders), AP7400 and MAA.
- Diagnosed Faults or issues that arise such as Failed engine starts, Low RPM, Low Throttle percentage, ACU intermittent and Generator fail starts, rectified them than return equipment to service.
- GOLDESP trained.
- (Military Drones)
- Identified mechanical problems and determined best solutions for correction.
- Frequently diagnosed mechanical problems and determined how to correct issues.
- Performed troubleshooting, diagnosis, and repair of [Type] equipment.
- Implemented preventive maintenance measures to decrease emergent issues.
- Utilized varied tools and equipment to test and troubleshoot mechanical systems.
- Kept track of equipment maintenance schedules using computerized maintenance management systems.
- Monitored equipment performance to confirm proper and efficient function.
- Kept detailed records of repairs and maintenance for reference in future work.
- Read and interpreted technical drawings and schematics to understand equipment design and proper maintenance.
- Collected and analyzed data to identify trends and develop solutions to existing mechanical problems.
Product Assembler
POLAMCO
Bath , Somerset
11.2015 - 03.2016
- Briefed from line manager of the days’ work.
- Obtained products from dispatch.
- Obtained matching seals and cir-clips.
- Ensured all items are of the highest quality.
- Ensured all items completed are damage free.
- Laser Printing.
- Riveting.
- Induction Welding.
- Assemble of back shell, connectors, and various electronic products.
- Sign and electronic document work carried out completed.
- (Temporary Employment)
- Adhered to safety practices and quality standards at all times.
- Worked efficiently to minimize material and time waste.
Buffer Machine Operator
DTR VMS
Trowbridge, Wiltshire
10.2015 - 11.2015
- Brief from line manager of the day’s work.
- Before use inspection of the machine.
- Checking machine at regular intervals for loose nut.
- Ensure any health and safety issues is highlighted to line manager.
- Constant communication with line manager to maintain a common goal.
- Ensure products are received at the highest quality.
- Ensure all work carried out are of the highest standard.
- (Temporary Employment)
- Cleaned, sanded, and buffed surfaces to prepare for paint applications.
- Smoothed target surfaces and used tape or paper to protect nearby areas.
- Reviewed finished metal and paint to look for imperfections such as scratches.
- Performed consistent and efficient work using both manual and machine-assisted methods.
Aircraft Technician
HM FORCES
, United Kingdom
05.2003 - 05.2015
- Delivered serviceable aircraft on a day-to-day basis.
- Managed maintenance crew from 3- 7 people on one aircraft with on-going maintenance from 50 flying hour maintenance with minimal aircraft strip to 200 flying hour maintenance and a major aircraft strip.
- Supervised subordinates 3 - 7 people per aircraft and coordinated on-going maintenance.
- Documented both on aircraft documentation and electronically all work carried out.
- Obtained information from shop floor and passed it up to management and vice versa to maintain situation awareness.
- Communicated all work on-going and completed to higher management.
- Replacement and repair of Tail Units, Tail Rotor Gear Boxes and Main Rotor Gear Boxes.
- Maintenance and replacement of Engines, Intermediate Gear Boxes and Tail Rotor Driveshaft.
- Numerous Aircrew Seats and passenger seat repairs and replacements.
- 50, 100, 200 flying hour maintenance.
- Maintained orderly and safe work environment by enforcing tool control and FOD awareness, prevention, and safety.
- Maintained, repaired and rebuilt aircraft structures and fuel, electrical, and oxygen systems.
- Assisted with aircraft and equipment transport and movement.
- Obtained fuel and oil samples to check for contamination.
Operations Clerk
Republic of Fiji Military Forces
Suva, Fiji
01.1997 - 01.2003
- Maintain Communication between Battalion Operations and all Echelons of the Battalion.
- Record all in-coming communication.
- Disseminate information to Company Commanders.
- Receive and communicate Incidents, Violations, Occurrences to Higher Command.
- Brief the Operations Officer of all Incidents Violations, Occurrences that occurred during my shift.
- Followed detailed directions from management to complete daily paperwork and computer data entry.
- Completed daily logs for management review.
- Volunteered to help with special projects of varying degrees of complexity.
- Drafted professional memos, letters, and marketing copy to support business objectives and growth.
- Opened and properly distributed incoming mail to promote quicker response to client inquiries.
- Provided clerical support to company employees by copying, faxing, and filing documents.
- Increased customer service success rates by quickly resolving issues.
- Planned and coordinated logistics and materials for board meetings, committee meetings, and staff events.
- Performed wide-ranging administrative, financial and service-related functions.
Geology Sampler
Emperor Gold Mining Company Limited
Vatukoula, Fiji
01.1996 - 01.1997
- Ensured I am safe and all equipment is safe to use.
- Vigilant at all times looking for cracks in the walls or ceiling.
- All cracks and loose rocks barred and dislodged from its attachment before progressing forward.
- Took Underground Samples from the mining face at regular intervals of mining.
- Placed Identity Marks on Samples prior to submitting to Laboratory.
- Electronically Recorded all sample on obtained on the day.
- Collected Sample Results from the laboratory.
- Entered Sample Results against sample numbers in the database.
- Placed sample codes indicated by results on underground maps.
- Identified low grade yield to management to determine if wall is economical to continue mining.
- Provided feedback to production team regarding product quality.
Machine Assistant
Emperor Gold Mining Company
Vatukoula, Fiji
01.1995 - 01.1996
- Understudy the machinist with drilling and charging up with explosives.
- Ensured that every area leading to the site is safe.
- Prepared all tools, equipment, fuel and lubricants for the days’ work.
- Identified which location will be worked and place all tools, equipment, fuel and lubricant so its accessible.
- Ensured a water and air source is within reach to power the machines.
- Ensured that the drill to be inserted is not blocked or bent.
- Tested the Machine and checked it works.
- Assisted the machinist during drilling to change drill, move positions or charge explosives.
- Calibrated, tested, and adjusted machine settings or controls in preparation for production operations.
- Set up and ran machinery to produce exceptional products for industrial needs.
- Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
- Complied with company and OSHA safety rules and regulations.
- Maintained and organized material and product inventory.
- Examined incoming materials and compared to documentation for accuracy and quality.
Scraper Operator
Emperor Gold Mining Company
Vatukoula, Fiji
01.1995 - 01.1996
- Located Pulley Blocks.
- Ran steel cables through pulley blocks.
- Cut steel cables to make loops to attach to scraper.
- Repaired broken cables.
- Operated the winch to scrape the load from the face to the gulley.
- Set up and ran machinery to produce exceptional products for industrial needs.
- Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
- Complied with company and OSHA safety rules and regulations.
- Performed preventive maintenance to prolong life of equipment.
- Loaded and moved materials such as dirt and rocks based on specific job needs.
- Made necessary adjustments to machinery for optimum performance.
- Adhered to instructions from supervisors and engineers onsite.
Education
Advanced Modern Apprenticeship -
Mechanical Engineering
Advanced Diploma - Level 3
Mechanical Engineering
NVQ Certificate - in Aircraft Maintenance
level 3
BTEC Level 3 -
Aerospace Engineering
City and Guilds Domestic Wiring installation - 17th Edition
Skills
- Good Communication skills
- Precision drilling
- Aircraft inspection
- Structural assembly
- Quality documentation
- Safety compliance
- Parts ordering
- Maintenance planning
- Effective communication
- Team leadership
- Supervisory and Leadership experience
- Proactive
- Decision-maker
- Methodical Approach
- Proficient in Microsoft Office applications
- Strategic Planning
- Quick Thinking
- Team Worker
- People Skills
- Aircraft inspection procedures
- Regulatory compliance awareness
- Ground support equipment operation
- Landing gear maintenance
- Preventive Maintenance
- Hydraulic systems maintenance
- Fuel system servicing
- Strong organization skills
- Fire extinguishing and oxygen systems
- Safety procedures
- Hydraulic systems
- Military maintenance standards
- Strong work ethic and integrity
- Results-driven
Hobbies and Interests
- Rugby
- Traveling
- Learning about new cultures
Additional Information
References/Referees available on interview., SC cleared, Clean Police Record, Clean Driver’s License, IMeche Engineering Membership
Languages
English
Professional
Fijian
Professional
Affiliations
Volunteer in our local Church - Mt Waverley Uniting Church
References
References available upon request.
Timeline
Aircraft Technician
Marand Precision Engineering
05.2023 - Current
Aircraft Mechanical Fitter
Boeing UK
11.2022 - 05.2023
Aircraft Mechanical Inspector/Fitter
Leonardo Helicopters
06.2018 - 11.2022
Mechanical Technician
UAV TACTICAL SYSTEMS LIMITED
04.2016 - 06.2018
Product Assembler
POLAMCO
11.2015 - 03.2016
Buffer Machine Operator
DTR VMS
10.2015 - 11.2015
Aircraft Technician
HM FORCES
05.2003 - 05.2015
Operations Clerk
Republic of Fiji Military Forces
01.1997 - 01.2003
Geology Sampler
Emperor Gold Mining Company Limited
01.1996 - 01.1997
Machine Assistant
Emperor Gold Mining Company
01.1995 - 01.1996
Scraper Operator
Emperor Gold Mining Company
01.1995 - 01.1996
Advanced Modern Apprenticeship -
Mechanical Engineering
Advanced Diploma - Level 3
Mechanical Engineering
NVQ Certificate - in Aircraft Maintenance
level 3
BTEC Level 3 -
Aerospace Engineering