ZANE SINGLETON

• welding and grinding repairs

• oxy work - including blowing and replacing bearings , cutting and repairing work parts

• machinery servicing

• auto electrical knowledge - fault finding , replacing harness and wire repairs

• operating excavators , tractors and tippers .

• repairs of pump motors and pump housings , impellers etc

• Loaded and unloaded necessary tools, materials and machines from trucks and trailers.
• Set up and reinforced forms to accurately pour concrete for walkways and other structures.
• Positioned wire mesh and rebar to reinforce concrete.
• Removed debris and waste to clean site after completing work.
• Finished surfaces by troweling, floating and brushing following project requirements and specifications.
• Poured concrete into forms using pump hose and leveled.
• Constructed forms to create various concrete structures.
• Inspected and maintained tools and equipment.
• Dismantled forms using basic and advanced tools.
• Worked with teammates to move steel forms.
• Placed steel pins using sledgehammer.
• Prepared and cleaned surfaces for finishing to reduce holes and cracks.
• Compacted grade using jumping jack or plate compactor equipment.
• Planned work based on verbal instructions, blueprints and written specifications.
• Prepared concrete by hand mixing sand and cement.
• Set up scaffolding, braces and other temporary structures to support crew during work.
• Operated excavators and loaders to prepare site.
• Reviewed blueprints and other drawings to identify correct grades.

• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Worked in team-based environment to accomplish projects.
• Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
• Installed new electrical components, fixtures and motors.
• Listened to directives of senior electrical professionals to complete efficient tasks.
• Measured and prepared supplies for electrical tasks.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Dug trenches and created holes to pull conduit and install supports.
• Followed relevant electrical and building codes for each job.
• Maintained organization, cleanliness and safety in work areas.
• Reviewed blueprints and electrical schematics to perform tasks to specifications.
• Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
• Adhered to company standards and OSHA regulations for work site safety.
• Kept work areas clean, neat and free of hazards.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Inspected existing wiring to identify short circuits.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Kept work areas clean, neat and organized for efficient operations.
• Resolved issues with existing systems and replaced malfunctioning parts.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Built controllers and panels to complete system installations.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Set up equipment and configured settings for optimal performance.

• Loaded and unloaded necessary tools, materials and machines from trucks and trailers.
• Set up and reinforced forms to accurately pour concrete for walkways and other structures.
• Positioned wire mesh and rebar to reinforce concrete.
• Removed debris and waste to clean site after completing work.
• Finished surfaces by troweling, floating and brushing following project requirements and specifications.
• Constructed forms to create various concrete structures.
• Inspected and maintained tools and equipment.
• Dismantled forms using basic and advanced tools.
• Worked with teammates to move steel forms.
• Placed steel pins using sledgehammer.
• Prepared and cleaned surfaces for finishing to reduce holes and cracks.
• Compacted grade using jumping jack or plate compactor equipment.
• Planned work based on verbal instructions, blueprints and written specifications.
• Prepared concrete by hand mixing sand and cement.
• Operated excavators and loaders to prepare site.
• Reviewed blueprints and other drawings to identify correct grades.

• Identified causes of issues through implementation of troubleshooting techniques.
• Identified causes of issues through implementation of troubleshooting techniques.
• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Installed new electrical components, fixtures and motors.
• Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
• Worked in team-based environment to accomplish projects.
• Kept work areas clean, neat and free of hazards.
• Gathered required tools and equipment for each task to increase efficiency.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Adhered to company standards and OSHA regulations for work site safety.
• Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
• Measured and prepared supplies for electrical tasks.
• Followed relevant electrical and building codes for each job.
• Assisted electricians in wiring residential buildings with installation of electrical conduits.
• Inspected existing wiring to identify short circuits.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Kept work areas clean, neat and organized for efficient operations.
• Maintained organization, cleanliness and safety in work areas.
• Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
• Dug trenches and created holes to pull conduit and install supports.
• Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.

• Completed harvesting activities using harvesters, tractors and other heavy equipment.
• Maintained and repaired farming equipment to provide consistent usability, prime operational condition and alleviate downtime.
• Used oil cans, hand tools and grease guns to lubricate and make minor repairs to farming machinery.
• Observed and listened to machinery operation to detect equipment malfunctions.
• Sprayed fertilizer or pesticide solutions to control insects, fungus and weed growth.
• Drove trucks and tractors to distribute feed to animals.
• Harvested vegetables to make ready for sale and consumption by picking, cleaning and packing with labels.
• Cleared and maintained irrigation ditches for adequate water flow, dust suppression and crop growth.

• Loaded and unloaded necessary tools, materials and machines from trucks and trailers.
• Set up and reinforced forms to accurately pour concrete for walkways and other structures.
• Positioned wire mesh and rebar to reinforce concrete.
• Removed debris and waste to clean site after completing work.
• Inspected and maintained tools and equipment.
• Dismantled forms using basic and advanced tools.
• Worked with teammates to move steel forms.
• Placed steel pins using sledgehammer.
• Operated excavators and loaders to prepare site.