Ameer Hamza

Projects:

Hay Street Substation – 132kV Single Line Diagram

Client: Western Power | Company: SpringCity | Tool Used: AutoCAD, PowerFactory (DIgSILENT), Excel.

Key Contributions:

• Drafted a complete 132kV single line diagram (SLD) for Hay Street Substation, incorporating transformers, circuit breakers, CTs, VTs, and busbar configurations.
• Ensured full compliance with AS/NZS standards and Western Power’s internal design guidelines.
• Worked closely with engineers and project managers to verify component placement, protection logic, and system coordination.
• Delivered final drawings for use in design validation, construction planning, and commissioning documentation.

Kemerton Battery Energy Storage System (BESS) – Schematic Design

Client: Trina Solar |Company: SpringCity |Tool Used: AutoCAD, PowerFactory (DIgSILENT), Excel.

Key Contributions:

• Drafted schematic layout and final electrical drawings for a 660 MW / 2,640 MWh BESS in Kemerton, WA.
• Integrated key components including inverters, isolators, and transformers into system schematics.
• Coordinated with engineers to ensure compliance with AS/NZS standards and grid requirements.
• Delivered construction-ready drawings for regulatory and project handover.
• Supported the documentation required for regulatory submission and construction phase handover.

Trench Dewatering Pump – Electrical Panel System Design

Client: Northern Star Resources Ltd | Company: SpringCity | Tool Used: AutoCAD LT, PowerFactory (DIgSILENT), Excel.

Key Contributions:

• Designed and drafted the single line diagram (SLD) for the electrical panel system powering trench dewatering pumps in an open-pit mining environment.
• Integrated components including motor protection, isolators, overload relays, and circuit breakers in accordance with AS/NZS 3000 and site-specific safety requirements.
• Collaborated with the engineering team to ensure accurate panel layout, control logic, and equipment selection based on field and operational needs.
• Delivered final schematics used for installation, commissioning, and maintenance support.

Design Alkimos Seawater Desalination Plant – Power Supply Schematic Design.

Client: WA Government | Company: SpringCity | Tool Used: AutoCAD LT, PowerFactory (DIgSILENT), Excel.

Key Contributions:

• Designed schematic layout for integrated power supply unit supporting critical systems within Alkimos Seawater Desalination Plant.
• Incorporated protection devices, distribution breakers, control wiring, and power supply interfacing in compliance with AS/NZS 3000 and relevant industry standards.
• Collaborated with electrical engineers and project leads to ensure technical accuracy, system reliability, and compatibility with the plant’s infrastructure.
• Delivered final design documentation used in construction planning, verification, and plant commissioning.

• Design and analyze electrical distribution systems, including calculating loads, voltage drops, and fault currents, as well as transformers, switchgear, and protection devices.
• Assisting in testing of solar system, ensuring that they are installed and functioning properly.
• Involved in troubleshooting and resolving electrical issues and outages in power distribution network.