Aswindra Nand
Kidman Way Griffith Nsw,Nsw
Summary
I am a dedicated professional with over 20 years of diverse experience in mechanical fitting, with meticulous approach to analyzing, diagnosing, and resolving a wide range of issues while adhering to strict checklists. Skilled in mandatory state inspections, I ensure top-quality work and compliance. My strong communication skills enable me to guide my strategies to tackle various breakdowns, showcasing a deep commitment to exceptional customer service. I am unwavering in my dedication to maintaining the highest standards in mechanical maintenance and repair for industrial machinery, consistently striving for excellence in all facets of my role.
Overview
21
21
years of professional experience
Work History
General Fitter
Stark food systems Pty Australia
Melbourne , Vic
06.2024 - Current
- Performed preventative maintenance on equipment to ensure proper operation.
- Calibrated a range of instruments in accordance with manufacturer specifications.
- Carried out repairs on hydraulic systems as instructed by supervisor.
- Analyzed data from test runs to identify areas for improvement.
- Replaced worn out bearings, seals and gaskets in engines and related equipment.
- Adjusted functional parts of mechanical devices as needed.
- Repaired and replaced defective parts to restore machinery to working order.
- Cleaned machine parts with solvents before assembly or installation.
- Aligned machines properly for efficient operation.
- Used hand tools such as hammers, wrenches and screwdrivers to complete tasks efficiently.
- Provided technical support to colleagues when required.
- Assembled and installed a variety of mechanical components, including pumps, motors, fans, valves and compressors.
- Ensured all safety protocols were followed when handling hazardous materials.
- Inspected machines and identified any potential issues or malfunctions.
- Observed safe work rules and utilized fall protection and PPE.
- Tested, diagnosed and replaced defective equipment.
- Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
- Threaded pipes using specified machinery.
- Installed piping systems for plumbing for both domestic and HVAC lines.
- Signaled and guided heavy equipment operators and secured special attachments to construction machines.
- Put together and took apart scaffolding and other temporary structures.
- Performed demolitions, installed remodeling products according to company standards and procedures and learned finishing work for installations and remodels.
- Service and carryout maintenance on FHF, DSI, Ev machine,
- General servicing of poultry meat harvesting machine.
Maintenance Fitter & Machine Operator
Coca Cola Euro Pacific Partners
Suva, Fiji
03.2014 - Current
- Ensure all planned maintenance work is completed on time and formally handed over to production or the relevant party
- Manage, co-ordinate and control the various engineering sections activities in accordance with the engineering systems and assist in planning
- Carry out maintenance for all the production line i.e
- (MMP, Can line and Krones Fill Line)
- Attend to reactive maintenance during production hours
- Machining some mechanical components on a lathe machine and some welding and fabrication at the workshop
- Doing some servicing and maintenance on a Steam boiler, Ammonia chiller and Air compressor
- Work as a shift operator /fitter and attending some breakdown on Hot fill on juice line with servicing all hot plants and equipment
- Maintaining general manufacturing practice online equipment, troubleshooting and general fitting and servicing
- Compile TNA (Training Needs Assessment) for the team and assist staff bridge gaps identified (Training and development of staff)
- Recommend procurement policies and practices which result in better purchasing and reduce cost with improved deliveries without compromising on quality
- Formulate and implement effective preventive and corrective maintenance policies for building, plant and machinery
- Ensure all engineering quality control standards and procedures are in place and maintained
- GF Fiji safety and Environmental standards, policies and procedures are always adhered to on site
- Ensure Good Management Practices (GMP) are implemented
- Lead the team in scheduled and unscheduled maintenance of: Buck elevator systems Packaging machines Pumping & piping systems (Centrifugal/Vane/High pressure hose pumps) High Speed Packaging Equipment Oven and coating barrel Servicing & repairs of grain mixers, mixing vats, gearboxes and agitators Servicing & repairs of pneumatic systems (Cylinders/Solenoids/FRL Units) Servicing & repairs of conveyor systems, press & extrusion snack machines
- Maintain plant reliability at an average of 90%
- Carry out installations and commissioning of plant and machinery
Mechanical Fitter
BlueScope Pacific Steel
Suva, Fiji
07.2006 - 06.2014
- Assisted with scheduling and planning of Preventative Maintenance of plant and Machinery
- Carried out preventative and scheduled maintenance to maximize production output
- Responsible for the efficient running and proper maintenance of all motorized and non-motorized plant and equipment in the factory which included: Vane, gear and Impeller pumps; Engine pumps and their accessories; Screw and piston compressors, Overhead cranes, Hydraulic systems, lines and cylinders, Pneumatic systems, lines and cylinders, Factory furnace and its auxiliaries, Reduction gearboxes, Hot rolling stands, Threading & Bending Machines, Mechanical Shears, Water and Oil pipelines, etc
- Attending to emergency breakdowns in an orderly and efficient manner to minimize downtime of steel mill
- Ensure that spare parts are arranged and available in case of breakdown
- Perform inspections of plant and machinery at regular intervals throughout the production day and perform proactive maintenance when required
- Review work area for potential HS&E Hazards
- Participate in HS&E improvements (e.g., better ways of doing business)
- Operate Mill furnace as required
- Train and encourage future trades men from universities and colleges
- Service compressors on site in a timely manner
- Assist and build hot rolling stands when required
Intern Fitter Machinist
Fiji Sugar Corporation
Labasa, Fiji
02.2004 - 10.2005
- Doing Plant Servicing in workshop and Stations
- Attending breakdown on Turbines, Boilers, Gear boxes, Conveyor drives
- Assist Trades Man in trouble shooting, GMP, Maintaining stock items
- Doing records keeping and stock up mechanical components in storeroom
- Maintaining the machinery clean especially lathes
Education
Certificate of National Completion - Working in Confined Space Awareness Training -
Fiji National University
Suva, Fiji11.2022
Certificate III in Engineering - Mechanical Trade - Maintenance, Fitting and/or Turning
Australia Pacific Training Coalition
07.2019
Certificate in Working in Confined Space and Safety Height -
Fiji National University
Suva, Fiji07.2018
Certificate of Attainment - Industrial Pumps 1 -
Fiji National University
Suva, Fiji05.2016
Certificate of National Convention on Quality -
Fiji National University
Suva, Fiji08.2013
Certificate In Boiler Operations; Basic, Intermediate and Advanced level -
Training and Productivity Authority of Fiji
Suva, Fiji12.2009
Certificate in Manual Preventative Maintenance & Root Cause Analysis -
Training and Productivity Authority of Fiji
Suva, Fiji04.2008
Trade Certificate in Fitting and Machining -
Fiji National University
Suva, Fiji10.2006
Trade Certificate (Class III) in Fitting and Machining -
Fiji National University
Suva, Fiji07.2006
Skills
- Maintenance Planning and Execution
- Mechanical Troubleshooting
- Equipment Maintenance
- Communication Skills
- Compliance and Quality Control
- Team Leadership
- Training and Development
- Job order prioritization
- Installation and maintenance
- Welding
- Motor alignment
- Pneumatic systems
- Bearing replacement
- Hydraulic systems
- Hydraulics
- Machine assembly
- Lubrication procedures
- Preventative maintenance
- System assembly
- Structural steel installation
- Machinery operation
- Precision measuring tools
- Gearbox repair
- Seal installation
- Gasket replacement
- Valve installation
- Hand tool proficiency
- Cutting and grinding
Reference
- Mr. Abdul Tasleem, Engineering Manager, Coco Cola Euro Pacific Partners Fiji, +679 7707760, abdul.tasleem@ccep.com
- Mr. Vineet Bir, Maintenance Coordinator, Coco Cola Euro Pacific Partners Fiji, +679 940615, Vineet.bir@ccep.com
- Wayne Thomas.Engineering manager at baiada struggle NSW Australia , Wayne Thomas @baiada.com.au
Personal Information
- Gender: Male
- Nationality: Fijian
Timeline
General Fitter
Stark food systems Pty Australia
06.2024 - Current
Maintenance Fitter & Machine Operator
Coca Cola Euro Pacific Partners
03.2014 - Current
Mechanical Fitter
BlueScope Pacific Steel
07.2006 - 06.2014
Intern Fitter Machinist
Fiji Sugar Corporation
02.2004 - 10.2005
Certificate of National Completion - Working in Confined Space Awareness Training -
Fiji National University
Certificate III in Engineering - Mechanical Trade - Maintenance, Fitting and/or Turning
Australia Pacific Training Coalition
Certificate in Working in Confined Space and Safety Height -
Fiji National University
Certificate of Attainment - Industrial Pumps 1 -
Fiji National University
Certificate of National Convention on Quality -
Fiji National University
Certificate In Boiler Operations; Basic, Intermediate and Advanced level -
Training and Productivity Authority of Fiji
Certificate in Manual Preventative Maintenance & Root Cause Analysis -
Training and Productivity Authority of Fiji
Trade Certificate in Fitting and Machining -
Fiji National University
Trade Certificate (Class III) in Fitting and Machining -
Fiji National University