PREM KUMAR THOGARI
Clyde,Australia
Summary
Accomplished Fibre Designer with extensive experience at Fulton Hogan, specializing in FTTX network design and optimization. Proficient in AutoCAD and project planning, I excel in delivering cost-effective solutions while ensuring compliance with NBN standards. My strong client communication skills have consistently enhanced project outcomes and facilitated seamless field coordination.
Overview
9
9
years of professional experience
Work History
Fibre Designer
Fulton Hogan
Melbourne , Victoria
04.2021 - 12.2024
- Ensured design accuracy by reviewing initial files from NBN.
- Designed cost-efficient EE/GPON Network based on submitted documents.
- Created End-to-End Designs utilizing Type-2 and Type-3 Architecture.
- Updated spatial Net with the latest design modifications.
- Generated PON Patching Reports for comprehensive network documentation.
- Produced Splice and Trace Reports to facilitate project tracking.
- Reserved ducts using Telstra Automated Duct Reservation System for DFN and LFN networks.
- Compiled Scooping Pack detailing splicing and re-entry joint requirements for field construction.
Fibre Designer
Solutions Telecommunications Consulting PTY LTD
04.2016 - 07.2021
Design Specialist
Broad-spectrum
Sydney
11.2020 - 04.2021
- Reviewed initial work release NDDs from NBN for compliance with established standards.
- Implemented holistic designs based on Type-2 and Type-3 architecture frameworks.
- Reserved ducts through Telstra automated duct reservation system for DFN and LFN networks.
- Imported developer pit and pipe data into PNI for accurate project planning.
- Created boundaries utilizing Boundary Manager to optimize design layout.
- Provided cost-effective solutions for complex MDU builds, network shortfalls, and air gaps.
- Developed end-to-end designs using Spatial Net to enhance project efficiency.
- Prepared BOM/BOQ and design deliverables based on field information received.
Tech Choice Designer
Broad-spectrum
Sydney
09.2020 - 11.2020
- Designed and optimized planned broadband network for Telstra/NBN.
- Reviewed initial work release documents to ensure compliance with Telstra/NBN standards.
- Raised Alfred/IFDV requests for missing documents, preventing construction delays.
- Ensured proper installation of NBN devices in EPR Hazard Zone.
- Updated as-built drawings based on redline markups from field activities.
- Mapped all subcontractor-based SOR claims to Telstra SOR codes.
- Prepared as-built submission documents, including Bill of Materials and Bill of Quantities.
- Created SLD and AC_SLD documents from splicing reports and power options.
Tech Choice Designer
Broad-spectrum
Sydney
06.2020 - 09.2020
- Review the initial file received from NBN.
- Plan to design the optimizing & cost efficient FTTP Network based on initial received file (HFC/FTTC/FTTN).
- Design & Update latest design in spatial Net.
- Create boundary map in spatial Net.
- Create the design in MapInfo Software and publish the design for field survey propose.
- Review the field survey photos provided to prepare for As-built drawing.
- Review all installation photos of devices like SMP, FJL, Splitters & network extension device locations like DPU, MPT.
- Propose any civils if required to meet NBN design Standards and make sure the review construction photos for the jobs like blockages, pit installation/update/replacement and ACM Removal works are provided along with breakout and reinstatement.
- Review all internal Artefacts like installation of PCD, NTD, PIC & SDS cable installation along with serial number information clearly visible in photos.
- Review As built Redline, SOR Claim, and Design provide to field survey matches.
- Create GML in the Spatial Net & Submit to NBN for design approval if required while using to haul SDS cable in existing TLS Conduits.
- Create BOMBOQ based on design requirements.
- Create MRF file for cable and device orders.
- Schedule the Outage works prior to work in field.
- Prepare As-built required Documents and Submit to NBN.
FTTX Designer
Fulton Hogan
04.2018 - 09.2019
- Artefacts design inputs will be review and raise if any missing to the client.
- Provide the design plans to construction team to pre-scope construction walkout.
- After receiving the Pre-scope walkout plans will be update in construction pack (i.e., Plans, SLD).
- If any changes required initial design as per the pre-construction walkout, will be raise to client with respect to the client instruction like, IFDV (In field design variation) prior to the Build on site.
- After receiving the client advise details, will be update in the construction pack and release to Construction crew.
- Construction team use to send the progressive construction details to us, based on this, will be update As Built and submit to client.
- In field construction constraints will be raise to client with an evidence as per the process.
- As per the client schedule, will be submit artifacts accordingly (DFN-Distribution Fibre Network, LFN (Local Fibre Network), IC (Initial completion), FC (Final completion).
- Reviewing Sub contractor diary Claims along with works completed provided redline mark-ups and fixing up mismatches identified between those 2 claims.
- Reviewing I pact Report atlas Recommendations where Copper cable Cut-in Works cannot be performed will be escalate to Telstra through in-field design variation and Updated design deliveries based on this change.
FTTX Designer
National Broadband Network (NBN)
Adelaide
10.2016 - 02.2017
- Designed Fibre Networks for FTTN, FTTP, and H.F.C in NBN project.
- Validated Area Planning Documents and High-Level Documents for SAM compliance.
- Reviewed CCU workbook, transfer sheets, and NPAMS for copper remediation works.
- Interacted regularly with Field team to gather essential data for network architecture design.
- Applied for Council Approvals regarding LAAN implementation.
- Finalized Node locations considering Health, Safety, and Environmental hazards.
- Recreated Network Architecture Design in AutoCAD for accuracy.
- Generated CLAAN plans and Council Pack for local Council Approvals.
Education
Master of Engineering - Telecommunication and Networking Engineering
Latrobe University
Melbourne, AustraliaBachelor of Engineering - Electronics and Communication Engineering
Vidhya Jyothi Institute of Technology
Hyderabad, INDIASkills
- AutoCAD
- MapInfo
- Spatial net
- Telstra ADR
- Windows all platforms
- MS Office
- MS Outlook
- FTTX design
- Planning and design of FTTX network
- Analysing Telstra's copper network
- Designing CCU connection plans
- End-to-end planning
- Design reviews
- Preparing documents
- High-level design
- Preparing deliverable documents
- Validating inputs
- Updating DFN route
- Planning a distribution fiber network
- Remediating the NBN database
- Designing node interconnections
- Preparing LASA-related documents
- Applying for power approvals
- Preparing BOM/BOQ
- Splicing tables
- Duct reservation
- Cost optimization
- As-built documentation
- Project planning
- Field coordination
- Client communication
- CAD drafting
- Knowledge on Fibre to the curb technology
- CCNA
- CCNP
- C
- C
Professional Attitude
- An organized, detail-oriented, and conscientious self-starter, able to strategize and prioritize effectively to accomplish multiple tasks and stay calm under pressure.
- Proven ability for managing all standard correspondence, documentation, follow up paperwork, internet & database entry along with maintaining all the procedures.
- Highly organized and independent; able to effectively coordinate tasks to accomplish projects with timeliness and creativity.
- Excellent written and oral communications skills; comfortable conversing with personnel at all levels of the business.
- Proven ability to work in cross-functional team environments and to work successfully in multicultural workplaces and live-in international locations.
Personal Information
- Title: FTTX Designer
- Nationality: Indian
References
- Rajesh Kuna, FTTx Senior Designer, Fulton Hogan Pvt Ltd, 0469775177
- Sivakanth Garimella, FTTx Design Team Leader, Visionstream Pvt Ltd, 0405870270
- Dinesh Nannapaneni, FTTx Senior Designer, Visionstream Pvt Ltd, 0416399996
Hobbies and Interests
- Playing Cricket
- Watching Movies
- Listening to Music
Disclaimer
I hereby declare that all the above information furnished about me is true to the best of my knowledge and belief.
Languages
- English
- Telugu
- Hindi
Software Computer Language
- Mapinfo
- Spatial NET
- AutoCAD
- CCNA
- CCNP
- C
- C++
Skill Set And Education
Auto CAD, MapInfo & Spatial NET, Telstra ADR, Windows All Platforms, MS Office, MS Outlook, Master of Engineering, Telecommunication and Networking Engineering, Latrobe University, Melbourne, Australia, Bachelor of Engineering, Electronics and Communication Engineering, Vidhya Jyothi Institute of Technology, J.N.T.U, Hyderabad, INDIA
Timeline
Fibre Designer
Fulton Hogan
04.2021 - 12.2024
Design Specialist
Broad-spectrum
11.2020 - 04.2021
Tech Choice Designer
Broad-spectrum
09.2020 - 11.2020
Tech Choice Designer
Broad-spectrum
06.2020 - 09.2020
FTTX Designer
Fulton Hogan
04.2018 - 09.2019
FTTX Designer
National Broadband Network (NBN)
10.2016 - 02.2017
Fibre Designer
Solutions Telecommunications Consulting PTY LTD
04.2016 - 07.2021
Master of Engineering - Telecommunication and Networking Engineering
Latrobe University
Bachelor of Engineering - Electronics and Communication Engineering
Vidhya Jyothi Institute of Technology
Similar Profiles
Eddie LaidlawEddie Laidlaw
Graduate Engineer at Fulton Hogan LtdGraduate Engineer at Fulton Hogan Ltd
Siyabonga HlopheSiyabonga Hlophe
Project Controls Manager at Fulton Hogan New ZealandProject Controls Manager at Fulton Hogan New Zealand
Anthony ScozzaroAnthony Scozzaro
Civil Union Delegate at Fulton HoganCivil Union Delegate at Fulton Hogan
Coby WeylandCoby Weyland
Site Supervisor at Fulton Hogan Utilities (WWMP Program)Site Supervisor at Fulton Hogan Utilities (WWMP Program)
Baljinder KaurBaljinder Kaur
Family Day Care Educator at Kids Individual Day CareFamily Day Care Educator at Kids Individual Day Care